Page 3 - SOURCE
35 EN GLISH 1 On/Off button Short press: Mutes the device. Long press: Switches the device off. 2 button to open the flip-release con- trol panel. 3 Volume control 4 SOURCE button to switch sources be- tween radio, CD, CD changer (if con- nected) and AUX. 5 AUDIO button to adjust bass, treble, middl...
Page 5 - Preamplifier output
37 EN GLISH Equalizer presettings (Presets) ........ 62Adjusting the display settings ........... 62 Entering a switch-on message .......... 62 Adjusting the level display ............... 62 Adjusting the display brightness ....... 63 Setting the display illumination colour ............................
Page 6 - Notes and accessories; Please read these operating instructions; Disposal of old unit; Remote control
38 Notes and accessories Notes and accessories Thank you for choosing a Blaupunkt prod- uct. We hope you enjoy using this new piece of equipment. Please read these operating instructions before using the equipment for the first time. The Blaupunkt editors are constantly work- ing on making the opera...
Page 7 - Amplifier; Detachable control panel; Theft protection
39 EN GLISH Notes and accessories Control panel Amplifier You can use all Blaupunkt and Velocity am- plifiers. CD changers You can connect the following Blaupunkt CD changers: CDC A 03, CDC A 08 and IDC A 09. Detachable control panel Theft protection The device is equipped with a detachable control ...
Page 8 - MENU
40 Detaching the control panel Press the button 2 . The control panel opens out towards you. Hold the control panel by its right side and then pull the control panel straight out of the bracket. Notes: The device is switched off after a time preset by you. For instructions, please read the section &...
Page 9 - Adjusting the volume; Setting the power-on volume
41 EN GLISH Switching on/off There are various ways of switching the de- vice on/off: Switching on/off using button 1 To switch on the device, press button 1 . The device switches on. To switch off the device, press and hold down button 1 for longer than two seconds. The device switches off. Switchi...
Page 11 - Switching the confirmation beep; Automatic Sound
43 EN GLISH Switching the confirmation beep on/off The system will output a confirmation beep for some functions if you keep a button pressed down for longer than two seconds, for instance, when assigning a radio station to a station preset button. You can switch the beep on or off. Press the MENU b...
Page 12 - Switching to radio mode; BND•TS; Adjusting the tuner
44 Switching to radio mode If you are in CD, CD changer or AUX mode, press the BND•TS button 6 or press the SOURCE button 4 repeat- edly until the memory bank, e.g. "FM1", appears on the display. Convenient RDS functions (AF, REG) The convenient RDS functions AF (Alternative Frequency) and R...
Page 13 - Selecting the waveband/memory
45 EN GLISH Switching the RDS function on/off To switch the RDS functions AF and REGIONAL on or off, press and hold down the TRA•RDS but- ton 7 for longer than two seconds. The RDS functions are active when RDS lights up in the display. Selecting the waveband/memory bank This device can receive prog...
Page 15 - Setting the scanning time
47 EN GLISH "SCAN" appears briefly in the display fol- lowed by a flashing display of the current station name or frequency. Cancelling the SCAN and continuing to listen to a station Press the MENU button 9 . Scanning stops and the radio continues playing the station that it tuned into last....
Page 17 - Switching traffic information; TRA•RDS; Setting the volume for traffic
49 EN GLISH Traffic information Your device is equipped with an RDS-EON receiver. EON ( E nhanced O ther N etwork) ensures that whenever a traffic announce- ment (TA) is broadcast, the system switch- es automatically from a station that does not provide traffic reports to the appropri- ate traffic i...
Page 18 - Risk of severe damage; Selecting tracks
50 CD mode You can use this device to play standard au- dio CDs, CD-Rs and CD-RWs with a diame- ter of 12 cm. To avoid problems when play- ing self-burned CDs, you should not burn CDs at speeds greater than 16-speed. Risk of severe damage to the CD drive! CD singles with a diameter of 8 cm and nonci...
Page 19 - Configuring the display
51 EN GLISH Cancelling MIX Press the 5 MIX button ; again. "MIX OFF" appears briefly on the display and the MIX symbol disappears. Scanning tracks (SCAN) You can scan (briefly play) all the tracks on the CD. Press the MENU button 9 for longer than two seconds. The next track will then be sca...
Page 20 - Preparing an MP3 CD
52 Notes: If a CD is ejected, the drive will auto- matically draw it back in again after 10 seconds.You can also eject CDs whilst the de- vice is switched off or whilst another audio source is activated. • • MP3/WMA mode You can also use this car sound system to play CD-Rs and CD-RWs that contain MP...
Page 22 - Configuring the default display; Configuring the MP3 scrolling
54 Switching to MP3 mode MP3 mode is activated in the same way as normal CD mode. For further information, please read the section entitled "Switching to CD mode" in the "CD mode" chapter. Configuring the display Configuring the default display You can display various types of inform...
Page 23 - Cancelling MIX
55 EN GLISH Selecting a directory To move up or down to another directory, press the or button : once or several times. Selecting tracks/files To move up or down to another track/file in the current directory, press the or button : once or several times. If you press the button : once, the cur- rent...
Page 24 - Switching to CD-changer mode; Selecting CDs
56 Cancelling repeat To stop the current track or current direc- tory from being repeated, briefly press the 4 RPT button ; . "RPT OFF" appears briefly on the display and RPT disappears. Interrupting playback (PAUSE) Press the 3 button ; . "PAUSE" appears on the display. Cancelling p...
Page 25 - Changing the display
57 EN GLISH Changing the display Five options are available for the display in CD changer mode: Track number and playing time Track number and timeCD number and track numberCD number and time CD number and playing time To switch between the display options, press and hold down the DISPL but- ton 8 f...
Page 27 - Adjusting the bass
59 EN GLISH Sound You can perform the sound settings (bass, middle, treble and sub-out) separately for every source (radio, CD, CD changer, AUX, traffic announcement and telephone/navi- gation). The volume distribution settings (balance and fader) apply to all the audio sources. Note: The settings o...
Page 28 - Adjusting the sub-out level
60 Setting the left/right volume distribution (balance) To adjust the left/right volume distribution (balance), press the AUDIO button 5 . "BASS" appears on the display. Press the or button : repeatedly until "BAL" appears on the display with the current setting.Press the or button :...
Page 29 - Adjusting the X-BASS boost; AUDIO
61 EN GLISH Press the or button : once. Press the or button : repeatedly until the desired frequency appears on the display. When you have finished making your chang- es, press the AUDIO button 5 twice. X-BASS X-Bass allows you to increase the bass at low volume.The selected X-Bass setting is e...
Page 30 - Equalizer presettings; Adjusting the display; Entering a switch-on message; Adjusting the level display
62 Equalizer presettings (Presets) This device features an equaliser in which the settings for the music genres "ROCK", "POP" and "CLASSIC" are already pro- grammed.To select an equalizer setting, press the AUDIO button 5 . "BASS" appears on the display. Press the or ...
Page 31 - Adjusting the display brightness
63 EN GLISH Press the MENU button 9 . The displays shows " MENU ". Press the or button : repeat- edly until "PEAK LVL" appears on the display.Press the or button : to select between "PEAK ON" and "PEAK OFF". When you have finished making your chang- es, press the MENU...
Page 32 - External audio sources; Switching the AUX input on/off
64 When you have finished making your chang- es, press the MENU button twice 9 . Selecting a display illumination during a colour scan Press the MENU button 9 . Press the or button : repeat- edly until "COL SCAN" appears on the display.Press the or button : to start the colour seek. The devi...
Page 33 - Technical Data
65 EN GLISH Adjusting the AUX preamplification To be able to adjust for differences in vol- ume, the level adjustment of the AUX input can be adjusted in 4 increments (0 to 3). Press the MENU button 9 . Press the or button : repeatedly until "AUX LVL" appears on the display.Press the or butt...
Page 35 - BP; Gerätepass
394 Blaupunkt GmbH, Robert-Bosch-Straße 200, D-31139 Hildesheim 02/06 - CM-AS/SCS1 (dt, gb, fr, it, nl, sw, es, pt, dk, pl, cz, sk) Name: ..................................................................... Typ: .................................................................... Serien-Nr: BP .......
