Blaupunkt 3.3 - Manual

5 Contents Device Overview ......................2 Safety notes .............................9 Safety Notes for Navigation ............ 9 Safety Notes for Handling the Lucca .............................................. 9 Initial Startup of Lucca ..........10 Lucca Scope of Delivery ..................

9 Safety notes For your personal benefi t, please carefully read the following safety notes and warnings before operating your Lucca for the fi rst time. Safety Notes for Navigation Caution: Do not operate the Lucca while driv-ing to protect yourself and others against accidents!View the display only ...

10 the engine since the GPS receiver constantly uses electricity and could discharge the vehicle bat-tery. • Do not unplug the connector by pulling on the wire. The wire could be damaged! • Do not use harsh solvents to clean the device; use only a damp, lint-free cloth. Initial Startup of Lucca If y...

11 • CD/DVD with european road map and operating instructions (long versions) Optional Accessories: • Carrying Case • DC Adapter • USB Cable • Second car kit • VAN/SUV Suction Cup • Holder for air vent opening Protective Films and Covers Prior to the initial use, remove the protective fi lms from the...

12 Setting the Language If the Lucca is switched on for the fi rst time, US English is used as the standard language. If necessary, you may have to set the desired language for the menus and the voice output: Turn on the Lucca using the Power button. A dialogue menu displays. In this menu you can sel...

16 Menu Button Quick Settings In the Quick Settings menu volume and brightness can be adjusted. The Quick Settings menu can be entered at any time independent of the cur-rent menu being active. Touch the Menu button. The Quick Settings menu displays. Touch the / buttons to adjust volume or brightnes...

17 cordingly before the battery runs out. Press the OK button to confi rm. Operating the Navigation Menus Software Keyboard If text entries are required, the touch-screen displays a software keyboard. You can perform all entries using your fi nger. Only capital letters can be en-tered.You do not have ...

18 Switching between Number, Umlaut and Character Input To enter numbers, such as postcode, touch the button To return to the character entry mode, touch To enter an umlaut, touch the button. The umlaut keyboard is displayed. As soon as you enter an umlaut, the character keyboard is auto-matically d...

19 er, you can also directly touch an entry to accept it. : Touch this button to scroll up in the list by one page (5 ele-ments). : Touch this button to scroll down in the list by one page (5 elements).To scroll through the list by several pages, repeatedly touch the corre-sponding button. Note: If ...

20 Touch the GPS Info button. The GPS Status menu displays. • GMT: Greenwich Mean Time Lon-don time without daylight savings time. • Longitude/Latitude, current Posi-tion: Information of the east longi-tude and north latitude. ➜ • Satellites: Number of satellites received. The navigation requires si...

21 Navigation General Notes about the Navigation The use of the Lucca is at your own risk. Caution: Do not operate the Lucca while driv-ing to protect yourself and others against accidents!View the display only if you are in a safe travel situation!The street routing and traffi c signs have priority ...

23 GPS Info Touch the GPS Info button to ob- tain information about the current GPS status and about your current position. Route Planning Touch the Itinerary button to plan a route with several stages. For further details, please read the section "Route Planning with Stag-es". Select Map To...

25 Specifying a Destination This section contains information about the different methods for en-tering, selecting and managing desti-nations with the Lucca.How to start the navigation to a des-tination is described in the chapter "Destination Guidance". Entering a Destination With the Lucca...

27 Note: If the country containing your des-tination is not displayed in the top line, touch the button and select the correct country. How to select a country is described in the chapter "Entering a Destina-tion Country". Touch the Town fi eld and enter the target location. You can enter eit...

28 • Save: – This function allows you to save the specifi ed address to your favourites. For further details, please read the chapter "Saving one of the recent destinations". Selecting a Point of Interest Special destinations, also referred to as POI (Point of interest), are part of the map a...

33 In the Point of interest menu, touch the ...nationwide button. The submenu displays. ➜ Note: If the country containing your destination is not displayed in the fi rst line, touch the button twice and select the correct coun-try. How to select a country is de-scribed in the chapter "Entering a ...

36 • Touch the Start navigation but- ton to use the selected location as place of destination for the naviga-tion. Notes: – This function is only available with GPS reception. – If you use this function during a navigation, all previously de-fi ned route locations (stages and destination points) are ...

40 Note: The route type used for the route calculation is automatically select-ed from the setting which you de-fi ned in the Routing options menu. Managing Destinations Two lists are available in which indi-vidual destinations are saved: • In the Favourites • In the Last destinations list Each desti...

44 The Destination entry menu dis- plays.Defi ne the route point similar to the destination entry. For more in-formation, see the chapter "Enter-ing a Destination".Touch the Add button. The Itinerary menu displays. The defi ned destination is listed as route point 1. Repeat the steps for all a...

45 Changing the Order • Move route point up: Select the route point to be moved.Touch the More button. Touch the Move target up button. The Itinerary menu is displayed again, the selected route point is moved up in the route list by one position.Repeat this process until the route point appears at t...

46 Loading a route Touch the More button. Touch Load route . Select the desired route.Touch OK . Calculating a Route A planned route can also be calculat-ed without GPS reception so that you can gain an overview of the trip.In this case, the fi rst defi ned route point is set as the starting point of ...

49 Destination Guidance Prerequisite: • You specifi ed a place of destina- tion as described in the chapter "Entering a Destination" - or - • you selected a place of destination from the Favourites as described in the chapter "Copying the Destina-tion from the Favourites" - or - • you...

50 Disturbed GPS Reception A message appears after entering the destination if no adequate GPS signal is received. • If you are in an enclosed room, move to the outside. The Lucca re-quires a vertical line towards the sky. If the GPS reception is disturbed during the destination guidance, the naviga...

51 Working with the Map Map Operation In this section you learn which in-formation and which processing op-tions are available in the map view. Depending on whether you display a map without or during the navigation, different options are available for op-eration. Showing a Map You can display the m...

54 • Zoom out– Touch this button to zoom out of the map. • Zooming level bar between the buttons / – Touch one of the sections of the bar to zoom in or zoom out of the map. • Zoom in– Touch this button to zoom in on the map. • Quit navigation – Touch this button to quit the navigation. Additional Fu...

56 Map Display during Destination Guidance During a navigation, the map display shows different navigation tools, route information and one additional button: Navigation Tools The left and lower area of the map dis-play the following navigation tools: • In case of actions that must be executed in br...

57 • The lower street fi eld displays the current street name. Route Information The right area of the map displays the following route information: – : This symbol represents stages. All information below it refers to the next destination. – : Estimated time of ar- rival. – : Estimated remaining tra...

61 Additional Functions during Navigation The following functions can be used during a navigation: • Inserting an interim destination • Skipping a stage • Blocking route segments Inserting an Interim Destination During the navigation, you can insert a new interim destination at any time. The route i...

62 Approaching the Next Destination This function is only available during a navigation on a route with at least one interim point.Use this function if you want to skip the next route point. Touch the Next destination but- ton to approach the next to one route point. The route is recalculated so tha...

63 Briefl y touch any position on the map.Select the Block road entry. The Block road menu displays. Enter the number of kilometres, starting with your current posi-tion, which you want to block. The route is recalculated and the blocked route segment is evaded. The blocked segment is marked in red. ...

67 • Display signsTouch the Show traffi c signs but- ton to change between the follow-ing modes:– Show traffi c signs: Always, – Show traffi c signs: On speed- ing only or – Show traffi c signs: Never • Warning in a town– The Warning in urban areas button shows the level of the speed-reading at which yo...

68 • 3 D auto zoom – Select whether you desire auto zoom or no auto zoom as de-fault in 3-D view during a navi-gation. • 2 D auto zoom – Select whether you desire low auto zoom, standard auto zoom, high auto zoom or no auto zoom during a navigation with 2-D view. Note: For 2-D and 3-D auto zoom, the...

70 Product Information Touch this fi eld to display the ver-sion of the map being used and the version of the navigation soft-ware. ➜ GPS Mode of Operation The Global Positioning System (GPS) was developed in the 70s by the US military.GPS is based on a total of 24 satel-lites that are orbiting the e...

71 If the Lucca receives the signals from at least 3 satellites, it can determine its position and display it on the map. This position can then be used as the starting point for a route calculation. Since a positioning and position dis-play is carried out once every second, you can view your moveme...

72 Push the SD card into the SD card slot according to the marking on the slot until the card engages. Selecting MP3 Mode If you are in a different operating mode, Press the Menu button longer than 3 seconds. The main menu displays. Touch the Music Player button. The MP3 menu displays: ➜ ➜ ➜ Startin...

73 Touch the fi le to which you want to listen by using the arrows to scroll up and down in the list. The MP3 menu is displayed again and the selected MP3 fi le starts playing. Playback the MP3 File To select the next fi le in the MP3 list, touch the button in the MP3 menu. To select the previous fi le ...

74 Removing the SD Card You quit the MP3 mode by touch-ing the button in the Mp3 menu.Carefully push on the SD card in the slot until it disengages. The SD card is ejected a little bit and can be removed. ➜ ➜ Picture Viewer Mode The Lucca can also be used to view pictures that are stored on the in-s...

75 Touch the Picture Viewer button. The Pictures viewer menu displays. The fi rst picture in the picture fi le recognised by the Lucca is dis-played. ➜ Selecting a Picture fi le To select the next picture in the fi le list, touch the next fi le by us-ing the arrows to scroll down on the Pictures Viewer m...

76 At the last slide the Question No-tice where the slide show is fi n-ished will appear. Starting the Full Screen Touch the Full button to view the full screen with all the pictures in the fi le list. On the full screen mode, you can move to the previous or next fi le by using the arrow icon. ➜ Pictur...

77 Removing the SD Card You quit the Picture Viewer mode by touching the button in the Pictures viewer menu. Carefully push on the SD card in the slot until it disengages. The SD card is ejected a little bit and can be removed. ➜ ➜ Installing Street Maps The road map of the country in which the Lucc...

78 Switch off and on the Lucca again by pressing the Power button for a few seconds. A dialog menu displays. Follow the instruction to install the street map. Determine whether to load the con-tent of the road map into the main memory of the device or whether the Lucca should load the data from the ...

79 Disposal of old unit (EU countries only) Do not dispose of your old unit in the household trash! Please use the return and collection systems available to dispose of the old unit. Service In some countries Blaupunkt offers a specifi c repair service including a pick-up service.In case your Lucca h...

80 Warranty We provide a manufacturer's warran-ty for our products purchased within the European Union. For devices pur-chased outside the European Union, the warranty terms issued by our re-spective responsible domestic agen-cy are valid. The warranty terms can be called up under www.blaupunkt.com/...

81 The internal navigation software re-mains intact and you can use either the internal navigation software or the one on the SD card for the selec-tion. Is the old internal navigation soft-ware overwritten with a change of the navigation software? No, the system can navigate with the internal as we...

Mobile Navigation TravelPilot Lucca 3.3 DE Die Lucca hat eine neue Ein-/Ausschaltlogik! Es gibt zwei Ausschaltzustände der Lucca: Den Ruhestand (Kurzdruck auf die Schaltfl äche Power ). Das vollständige Ausschalten aller Funktionen (Langdruck länger als 3 Sekunden auf die Schaltfl äche Power ). Zum Ei...

Mobile Navigation TravelPilot Lucca 3.3 CC DE Beiliegendes Kartenmaterial (Backup CD-ROM) Ihrer Lucca 3.3 CC liegt detailliertes Kartenmaterial zu den auf der Verpa-ckung genannten Ländern (bzw. dem Land) bei. Entgegen den Angaben in den Bedienungsanleitungen umfasst dies nicht Gesamt-Europa. Karten...