BILLY GOAT TKD505SPT - Manual
BILLY GOAT TKD505SPT – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Part No. 890316 Form No. F082195D; SOUND TESTS; SOUND; BAROMETRIC PRESSURE:; IN THE INTEREST OF SAFETY; TABLE OF CONTENTS; VIBRATION; The Engine Exhaust from this product contains chemicals known
- Page 3 – Part No. 890316 Form No. F082195D; QUICK DISCONNECT; GENERAL SAFETY; PACKING CHECKLIST; Tecumseh; ASSEMBLE
- Page 4 – Manual; Manual; Literature Checklist; WARNING; Start; Stop; CONTROLS; ENGINE LABELS; DANGER; PULL TO ENGAGE CLUTCH
- Page 5 – Use caution when using chipper; TERMITE; VACUUM NOZZLE HEIGHT ADJUSTMENT:; djust nozzle close to debris,; IF YOUR UNIT FAILS TO START:; Maximum; OPERATION; CHIPPING OPERATION; CLEARING A CLOGGED CHIPPER HOPPER; VACUUMING OPERATION; STARTING
- Page 6 – continued; Frequently empty debris to prevent bag overloading with; DO NOT place bag on or near hot surface; (see Safety Warnings; Run machine at idle to quarter throttle.; DEBRIS BAG
- Page 7 – GROUND SPEED; Do not store with debris in bag.; PROPULSION; Tamper Storage Position.
- Page 8 – MAINTENANCE; CHIPPER BLADE REMOVAL AND SHARPENING; The chipper blade gap is factory set and should be checked; Chipper blades are normal replaceable wear items.; Chipper blade is sharp.; INCORRECT; your unit may or may not have required the use of shim washers; EDGE OF CHIP; Using a penetrating oil can help loosen a stuck impeller.; IMPELLER REMOVAL
- Page 9 – . If chipper blade properly clears anvil surface, proceed to step 20.; and; CHIPPER; R o d; Maintenance Schedule; CLUTCH ADJUSTMENT; DRIVE
- Page 10 – PARTS DRAWING
- Page 12 – TROUBLESHOOTING; Before Requesting Service Review These Suggestions; Engine Service and Warranty; Contact your nearest engine manufacturer's autho-; Serial Plate; WARRANTY PROCEDURE
Part No. 890316 Form No. F082195D
Page 1 of 12
Thank You for Selecting
Thank You for Selecting
Thank You for Selecting
Thank You for Selecting
Thank You for Selecting
Operator Owner's Manual
Specifications
®
The
The
The
The
The
The Powerful
TKD TERMITE
®
SELF-PROPELLED
VACUUM CHIPPER
R
UNIT SIZE:
OVERALL LENGTH: 62"(1.57m) OVERALL WIDTH 26.75" (0.68m)
OVERALL HEIGHT 42" (1.07m)
SHREDDER KIT
P/N 890209.
Shreds
leaves, dramatically reduc-
ing total volume.
For vacuuming in hard to
reach areas.
HOSE KITS
Heavy Duty Vacuum
Hose Kit P/N 900943.
4"
(102mm)
x 10'
(3.05m)
Homeowners Vacuum
Hose Kit P/N 900942.
4"
(102mm)
x 10'
(3.05m)
NOZZLE WEAR PLATES
P/N 900810.
Extends
nozzle
life when used along curbs and
hard surfaces.
OPTIONAL DEBRIS BAGS
1
2
3
OPTIONAL ACCESSORIES
TKD505SPT
TKD505SPT
ENGINE: H.P.
5.5 (4.1 kW)
ENGINE: TYPE
TEC. PREMIER
ENGINE: FUEL CAP.
1.5 qt. (1.4 L)
ENGINE: OIL CAP.
0.66 qt. (0.62 L)
WEIGHT: UNIT
126# (57.2 kg)
WEIGHT: SHIPPING
149# (67.6 kg)
ENGINE WEIGHT:
18.75# (8.5 kg)
STANDARD TURF QUICK
DEBRIS BAG
P/N 890307.
Standard on TKD
models. For use in leaves and
grass in non-dusty conditions.
QUICK DEBRIS BAG
P/N
890305
for use in dusty
conditions.
DEBRIS BAG COVER
P/N 900801
Directs dust
downward away from operator.
ZIPPERLESS QUICK BAG
P/N 890309
For non dusty
conditions that are damaging to
zippers.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Part No. 890316 Form No. F082195D THIS SYMBOL MEANS WARNING OR CAUTION. DEATH, PERSONAL INJURY AND/OR PROPERTYDAMAGE MAY OCCUR UNLESS INSTRUCTIONS ARE FOLLOWED CAREFULLY. BEFORE STARTING ENGINE, READ AND UNDERSTAND THE “ENTIRE OPERATOR'S MANUAL & EN-GINE MANUAL.” WARNING: DO NOT 1. DO NOT run en...
Part No. 890316 Form No. F082195D Page 3 of 12 For your safety and the safety of others, these directions should be followed: Use of Ear Protection is recommended whileoperating this machine. Do not operate this machine without first readingowner's manual and engine manufacturer's manual. Use of Eye...
Part No. 890316 Form No. F082195D EVERY 10 HOURS 830502 OIL CHAIN WARNING 900327 Page 4 of 12 Owner's Manual Literature KD / TKD Accessories Check Owner's Manual 890316 Literature KD / TKD Accessories 890317 Check Literature Checklist These labels should be included on your Vacuum. If any of thesela...
