Beko CWB9503X - User Manual

Page 2 - Please read this user manual first!; Explanation of symbols

Complies with the WEEE Directive. This product was manufactured using the latest technology in environmentally friendly conditions. Please read this user manual first! Dear Customer, Thank you for purchasing this Beko product. We hope that you get the best results from your product which has been ma...

Page 3 - General; Your Hood

3 / 13 EN TABLE OF CONTENTS 1 General 4 2 Safety Precaution 5 1.1 Before connecting the model to the electricity network: . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 1.2 Warning! . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 3 Your Hood 6 2.1 Technical Specifications . . . . ...

Page 4 - General

4 / 13 EN 1 General Carefully read the following important information regarding installation safety and maintenance. Keep this information booklet accessible for further con-sultations. The appliance has been designed for use in the ducting version (air exhaust to the outside – Fig.1B), filtering v...

Page 5 - Before connecting the model to the; Safety Precaution

5 / 13 EN Take care when the cooker hood is operating si- multaneously with an open fireplace or burner that depend on the air in the environment and are sup- plied by other than electrical energy, as the cooker hood removes the air from the environment which a burner or fireplace need for combustio...

Page 6 - Your Hood; Technical Specifications

6 / 13 EN 3 Your Hood Markings on the product or the values stated in other documents supplied with the product are values obtained under laboratory conditions as per relevant standards. These values may vary according to the usage of the product and ambient conditions. 2.1 Technical Specifications ...

Page 7 - Installation Instructions; Fixing to the wall

7 / 13 EN 3 Installation Instructions • Assembly and electrical connections must be carried out by specialised personnel. • Wear protective gloves before proceeding with the installation. 3.1 Electric Connection: - The appliance has been manufactured as a class II, therefore no earth cable is necess...

Page 8 - Fixing the decorative telescopic

8 / 13 EN 3 Installation Instructions 3.3 Fixing the decorative telescopic flue Arrange the electrical power supply within the di- mensions of the decorative flue. If your appliance is to be installed in the ducting version or in the version with external motor, prepare the air exhaust opening. Adju...

Page 9 - Use and Maintenance

9 / 13 EN 4 Use and Maintenance • We recommend that the cooker hood is switched on before any food is cooked. We also recom-mend that the appliance is left running for 15 minutes after the food is cooked, in order to thor-oughly eliminate all contaminated air. The effec-tive performance of the cooke...

Page 10 - Replacing halogen light bulbs

10 / 13 EN 4 Use and Maintenance 4.2 Replacing halogen light bulbs (Fig.8): To replace the halogen light bulbs B, remove the glass pane C using a lever action on the relevant cracks. Replace the bulbs with new ones of the same type. Caution: do not touch the light bulb with bare hands. Fig.8 Fig.9 •...

Page 12 - Guarantee and Service

Cooker Hood / User Manual 14 / 14 EN Guarantee and Service Your Beko product is guaranteed against the cost of breakdown re-pairs for 2 years from the date of the original purchase. What is covered? • All repairs necessary as a result of faulty materials, defective components or manufacturing defect...

Beko CWB9503X - User Manual

Table of Contents:

Summary

Other Beko Range Hoods Models