Beckett CF 500/800 - Manual
Beckett CF 500/800 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Instruction Manual; Hazard definitions; High altitude installations; — Accepted
- Page 3 – Contents; Warranty; Agency approvals
- Page 4 – Pre-installation checklist; level with or higher than; fuel unit —; If fuel supply is; below; the fuel unit —; Table 1 - Nozzle capacities; Rated
- Page 5 – Verify firing rate; Verify air tube; Figure 1 - Min. Combustion chamber dimensions; Figure 2 - Air tube mounting dimensions
- Page 6 – Mount the burner; non-pressure firing flange; pressure-firing flange; Mount air tube to burner; Figure 4 - Nozzle and nozzle line assembly
- Page 7 – Figure 5 - Nozzle line assembly in burner; Legend; Figure 6 - Adjusting plate assembly; Install nozzle line assembly; Set dimension Z; do not loosen acorn nut; Insert burner
- Page 8 – Fuel unit by-pass plug; Oil supply/return lines
- Page 9 – Table 3 – Fuel unit gearset capacities; Burner fuel flow; Figure 8 – Two-pipe oil flow with “B” pump
- Page 10 – Figure 9a – Typical wiring; Sequence of operation — typical
- Page 11 – Figure 9b – Alternate wiring R8184
- Page 12 – Z dimension; Initial head position; Initial air settings; Table 4 – Initial indicator adjustment plate settings; Prepare the burner for start-up; Table 5 – Initial air settings; Set appliance limit controls
- Page 13 – Starting the burner and venting air; Priming the pump; While the ignition is on, press and release the reset button; Resetting from restricted lockout; LED Indicator key
- Page 14 – Maintenance and service; Monthly maintenance; Annual service; continued; Set air adjusting plate; Example
- Page 15 – Replacement parts; Figure 10 – Adjustable mounting plates for CF500/CF800
500/800
Instruction Manual
ON/OFF Operation
Firing rate:
CF500:
1.75 – 5.50 GPH
CF800:
3.00 – 8.00 GPH
Motor voltage:
120 / 60 Hz
std.
MODEL
MODEL
MODEL
MODEL
MODEL
CF
500/
Oil
Burner
Thank you
for purchasing a
Beckett burner. With proper care and
regular maintenance, it will provide
years of trouble-free service. Please
take a few minutes to read the section
entitled “To the owner” inside this
manual. Then, keep the manual in a
safe place where it can be easily
located if needed by your professional
service technician.
CF
800
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 Form 6104 BCF5-R0301 Instruction Manual – Model CF500/CF800 Oil Burner Please . . . read this page first Hazard definitions The following will be used throughout this manual to bring attention to hazards and their risk factors, or to special information. D e n o t e s p r e s e n c e o f a h a z a...
3 Form 6104 BCF5-R0301 Instruction Manual – Model CF500/CF800 Oil Burner Contents Please . . . read this page first ................ 2 Pre-installation checklist ........................... 4 Mount the burner .......................................... 6 Connect fuel line(s) ............................
4 Form 6104 BCF5-R0301 Instruction Manual – Model CF500/CF800 Oil Burner Pre-installation checklist ❏ Combustion air supply • The burner requires combustion air and ventilation air for reliable operation. Assure that the building and/or com-bustion air openings comply with National Fire ProtectionSt...
