Beckett AFG Oil Burner - Manuals

Page 2 - Instruction Manual; – Model AFG Oil Burner; Contents; Table 1

Instruction Manual – Model AFG Oil Burner 2 Contents Prepare before installing Verify specifications ............................................................................................. 3Be aware of hazard definitions ............................................................................

Page 3 - Be aware of hazard definitions; Check certifications/approvals; Prepare before installing; Verify specifications

Instruction Manual – Model AFG Oil Burner 3 Be aware of hazard definitions Denotes presence of a hazard which, if ignored, will result in se- vere personal injury, death or substantial property damage. Denotes presence of a hazard which, if ignored, could result in severe personal injury, death or s...

Page 4 - Prepare burner & site; Table 2; Inspect/prepare installation site

Instruction Manual – Model AFG Oil Burner 4 Inspect/prepare installation site Chimney or vent • Inspect the chimney or vent, making sure it is properly sized and in goodcondition for use. • For those installations not requiring a chimney, such as through-the-wall ventedappliances, follow the instruc...

Page 5 - Figure 1; if not already installed; Prepare burner

Instruction Manual – Model AFG Oil Burner 5 Figure 1 — Electrode settings Install burner nozzle ( if not already installed ) (continued) Use care when removing and installing oil nozzles: • Inspect the nozzle adapter before installing nozzle. If it is grooved or scratched on the sealing surface, rep...

Page 6 - Figure 2; head; Table 3; F heads

Instruction Manual – Model AFG Oil Burner 6 Figure 2 — “ F ” heads (plus burner detail for all head styles) (see Table 3 for dimensions) Check/adjust "Z" dimension - "F" head Prepare burner & site Table 3 — Dimensions for Figures 2, 3 and 4 1. See Figure 2 above. The important &#...

Page 7 - Set head position adjusting plate

Instruction Manual – Model AFG Oil Burner 7 Figure 4 — “ V1 ” heads (see Table 3 and Figure 2 for dimensions) Prepare burner & site Figure 3 — “ L1 ” heads (see Table 3 and Figure 2 for dimensions) Check/adjust "Z" dimension - "L1" head Check/adjust "Z" dimension - "V...

Page 8 - Wire burner; Figure 5; Mount burner on appliance; Connect fuel lines

Instruction Manual – Model AFG Oil Burner 8 Burner packaged with appliance • Refer to appliance manufacturer’s wiring diagram for electrical connections. Burner applied at jobsite • Refer to Figures 6 and 7, page 9, for typical burner wiring, showing cad cellprimary controls. Burner wiring may vary,...

Page 9 - Figure 6; Figure 7; Table 5

Instruction Manual – Model AFG Oil Burner 9 Figure 6 — Typical wiring, R8184G or equivalent primary control Figure 7 — Typical wiring, R7184 primary control (R7184P shown) Adjust, pipe & wire burner Electrical shock hazard . Disconnect power before servicing. Electrical shock hazard . Disconnect...

Page 10 - To replace blower wheel:; Set combustion with instruments; Startup & adjust burner

Instruction Manual – Model AFG Oil Burner 10 To replace blower wheel: Perform annual maintenance Startup burner/set combustion Do not attempt to start the burner when excess fuel or vapor has accumulated in the appliance. Starting the burner under these conditions couldresult in a puffback of hot co...

Page 11 - Replacement parts; Aw a i t i n g n e w i n fo; Service & maintain burner

Instruction Manual – Model AFG Oil Burner 11 Replacement parts Aw a i t i n g n e w i n fo Service & maintain burner

Page 12 - Owner service and maintenance; Daily; Owner’s information; Warranty; Products

Instruction Manual – Model AFG Oil Burner 12 U.S.A.: P. O. Box 1289 • Elyria, Ohio 44036 Canada: R. W. Beckett Canada, Ltd. • Unit #3, 430 Laird Road • Guelph, Ontario, N1G 3X7 This burner must be installed, adjusted and started only by a quali- fied service agency — an individual or agency, license...