Barco R9843050 - Manual
Barco R9843050 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – Overview; Introduction; Kit contents; Contents
- Page 5 – Installation; Removing the Server; How to remove the Server ?
- Page 6 – Removing the video inputs (layer 1 and layer 2); How to remove the video inputs ?; Video Board adaptation; What has to be done ?
- Page 8 – Replacing the power fan grid
- Page 9 – Reassembling the input box; How to mount the support plate ?; How to mount the server ?
Ser ver Upgrade Kit for Barco iQ Pro
Installation Manual
R9843050
R9843051
R5976950/00
15/02/2006
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
1. Kit description 1. KIT DESCRIPTION Overview • Description • Kit contents 1.1 Description Introduction In order to increase server performance, a new server upgrade kit has been developed for the following projectors : • iQ Pro G350 • iQ Pro R350 • iQ Pro G500 • iQ Pro R500 The new server is ETX b...
2. Kit installation 2. KIT INSTALLATION Installation The installation of the new server involves different steps (explained in detail further on). 1. Physical installation, see procedure below 2. Performing the upgrade tool (see InfoT640) 3. Firmware upgrade to V3.00 (see InfoT640) 4. Adaptation of ...
2. Kit installation Image 2-2side screw 4. Take the server out of the input box Image 2-3Server removed from the input box 2.2 Removing the video inputs (layer 1 and layer 2) How to remove the video inputs ? 1. Refer to the service manual for the detailed procedure 2.3 Video Board adaptation What ha...
