Page 5 - Table of contents; TABLE OF CONTENTS
Table of contents TABLE OF CONTENTS 1. Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1.1Important Safety Instructions . . . . . . . . . . . ....
Page 7 - Important Safety Instructions
1. Safety 1. SAFETY 1.1 Important Safety Instructions Instructions: • Read these instructions. • Keep these instructions. • Heed all warnings. • Follow all instructions. • Do NOT submerge fully or partly in water or other liquids. • Clean only with materials or chemicals that are inert, nonabrasive,...
Page 8 - Important Warnings
1. Safety 1.2 Important Warnings Important Warnings: • Risk of electric shock: Image 1-1Risk of electrical shock Risk of electric shock. Do not open. To reduce the risk of electric shock, do not remove cover (orback). No user-serviceable parts inside. Refer servicing to qualified service personnel.T...
Page 11 - General functionality; Overview; Order info D320L Digitizer; Technical summary; Summary
2. Introduction 2. INTRODUCTION 2.1 General functionality Overview The D320L is a video processing device, designed to drive exclusively Barco LED walls. The D320L iscapable of handling all standard output formats like SVGA, XGA, SXGA and UXGA on an analog RGBHVand digital DVI output. The D320L Digi...
Page 12 - Dimensions of the D320L Digitizer; Dimensions
2. Introduction Type Value Effects Anamorphic imaging, Chroma keying [per input], Alpha keying [perinput], Z-order control, Windowing/ View ports Ruggedness IP 10 Dimensions D320L 486 x 482 x 53 (W x D x H) Dimensions D320L input Units 41 x 181 x 103 (W x D x H) Weight ± 7 kg Operating Temperature 0...
Page 13 - Physical Installation of the D320L Digitizer; PHYSICAL INSTALLATION OF THE; Installation requirements; Requirements
3. Physical Installation of the D320L Digitizer 3. PHYSICAL INSTALLATION OF THE D320L DIGITIZER 3.1 Installation requirements Requirements • The D320L Digitizer should not be placed in a built-in installation or enclosure unless proper ventilationis provided. • When using the unit in a multi-unit ra...
Page 14 - Connections; Rear panel inputs/outputs
3. Physical Installation of the D320L Digitizer 3.2 Connections Rear panel inputs/outputs Image 3-2 A LED-WALL OUTPUTB Power SwitchC Power inputD LOOP INE LOOP OUTF Retractable dust filterG COM1 : RS232 inputH COM2 : RS232 chaining outputI COM3 : RS232 stacking output J TCP-IP : Ethernet LAN connect...
Page 15 - Removing and inserting a D320L Digitizer input module; How to remove an input module from the D320L Digitizer
3. Physical Installation of the D320L Digitizer • A : LED-WALL OUTPUT - LED wall out (Barco proprietary protocol). - RGB HV out (analog). • B : Power switch - The power ON/OFF switch is provide on the rear side of the Digitizer. o Switch pressed to 1 = the unit starts. o Switch pressed to 0 = unit t...
Page 16 - How to insert an input module into the D320L Digitizer
3. Physical Installation of the D320L Digitizer Image 3-3 How to insert an input module into the D320L Digitizer 1. Gently slide in the input module into a free input slot with the grip handle at the top. 2. Locking in the module by pushing the input module completely into the D320L Digitizer until ...
Page 17 - DVI input module
4. Input modules 4. INPUT MODULES Overview • DVI input module • SDI input module • HDSDI input module • CVBS / S-VID input module • YUV / RG(s)B input module • RGB analog input module • Dummy input module 4.1 DVI input module Technical info: • Computer generated graphical source. • DVI data in. • 16...
Page 18 - SDI input module; HDSDI input module
4. Input modules 4.2 SDI input module Technical info: • SDI data in. • SDI loop through. • 270Mbit/s transmission (SMPTE 259M-C). • 525/625 interlaced. • Coax (75 Ohm). • Amber LED (upper LED on the front side) will be lit indicating recognition of film, either continuous orintermittent film detecti...
Page 21 - RGB analog input module
4. Input modules Image 4-9 Image 4-10 Order info: Article No. Description R9850940 D320L Digitizer YUV / RG(s)B input module 4.6 RGB analog input module Technical info: • Sub D15 connector for input and loop through. • R, G, B, Hsync, Vsync : 0 to 1 Vpp ±3dB 75 Ohm termination. • Black level : 300mV...
Page 22 - Dummy input module; Technical info
4. Input modules 4.7 Dummy input module Technical info • Dimensions : 103 x 181 x 41(W x D x H) Image 4-13 Image 4-14 Order info: Article No. Description R9850930 D320L Digitizer dummy input module 18 R5976542 D320L DIGITIZER 15042003
Page 23 - Cables and accessories for the D320L Digitizer; CABLES AND ACCESSORIES FOR THE; Cables and accessories; List with available cables and accessories
5. Cables and accessories for the D320L Digitizer 5. CABLES AND ACCESSORIES FOR THE D320L DIGITIZER 5.1 Cables and accessories List with available cables and accessories Article No. Description Image R326103 Power cable with CEE7 plug. image 5-1 R3261115 Power cable with NEMA 5–15 plug. image 5-2 B5...
Page 25 - Configuration schemes; CONFIGURATION SCHEMES; Stand alone configuration; Chaining configuration; Scheme
6. Configuration schemes 6. CONFIGURATION SCHEMES 6.1 Stand alone configuration Scheme Image 6-1 One D320L Digitizer is sufficient to drive one Barco LED wall with four different sources. How to set up a D320L stand alone configuration 1. Connect the RS232 communication port of the local control PC ...
Page 26 - How to set up a D320L chaining configuration; Stacking configuration
6. Configuration schemes The D320L Digitizer can be chained in order to generate more windows on the output display (four win-dows per D320L Digitizer). How to set up a D320L chaining configuration 1. Connect the RS232 communication port of the local control PC with the COM1 RS232 input port of the ...
Page 27 - How to set up a D320L stacking configuration; Combined chained and stacked configuration
6. Configuration schemes How to set up a D320L stacking configuration 1. Connect the RS232 communication port of the local control PC with the COM1 RS232 input port of the first D320L Digitizer. This Digitizer will act as the master, all following Digitizers are slaves. 2. Connect the LOOP OUT with ...
Page 28 - How to set up a mixed configuration
6. Configuration schemes How to set up a mixed configuration 1. Connect the RS232 communication port of the local control PC with the COM1 RS232 input port of the first D320L Digitizer. This Digitizer will act as the master, all following Digitizers are slaves. 2. Connect the LOOP OUT of each previo...
Page 29 - XLite Toolset; General introduction
7. Control Software 7. CONTROL SOFTWARE 7.1 XLite Toolset General introduction The XLite Toolset (R9850042) is used to configure and control the D320L Digitizer from basic set-up toadvanced features such as chroma keying, alpha blending or window positioning. Refer to the manual(R5976380) for more i...
Page 31 - Maintenance of the D320L Digitizer; MAINTENANCE OF THE D320L; Cleaning the dust filter; How to clean the dust filter; Cleaning the cabinet; How to clean the cabinet
8. Maintenance of the D320L Digitizer 8. MAINTENANCE OF THE D320L DIGITIZER 8.1 Cleaning the dust filter The fan intake grill of the D320L Digitizer has a retractable dust filter which must bechecked for good functionality on regular basis. Never allow this filter to become blocked up. How to clean ...
Page 35 - Index; INDEX
Index INDEX A Accessories 19 C Cables 19Cleaning 27 Air dust filter 27Cabinet 27 Configuration scheme 21–23 Chaining 21Mixed 23Stacking 22Stand alone 21 Configuration schemes 21Connections 10 D320L 10 D D320L 7–9, 13, 29 Dimensions 8Functionality 7Input modules 13Installation 9 Requirements 9 Option...
Page 37 - Revision Sheet
Revision Sheet To: Barco nv Events/Documentation Noordlaan 5, B-8520 KuurnePhone: +32 56.36.89.70, Fax: +32 56.36.88.24E-mail: [email protected], Web: www.barco.com From: Date: Please correct the following points in this documentation ( R5976542/00 ): page wrong correct R5976542 D320L D IGI...
