Barco 2226 - Manual

1. Welcome! 1.2 Symbols Overview The following icons are used in the manual : Caution Warning Info, term de fi nition. General info about the term Note: gives extra information about the described subject Tip: gives extra advice about the described subject 1.3 What’s in the box Overview Your MDSC-22...

2. Parts, controls and connectors 2. PARTS, CONTROLS AND CONNECTORS 2.1 Front view Overview 1 2 3 4 5 6 7 Image 2-1 1 Input Selection key 2 Multi-image selection key / Down key 3 Image zoom key / Up key 4 OSD Menu key / Enter key 5 Brightness decrease / Left key 6 Brightness increase / Right key 7 S...

2. Parts, controls and connectors 2.2 Rear view Overview 4 1 5 1 1 1 3 2 Image 2-2 1 VESA mount screw holes 2 Cable routing channel 3 Cable routing channel expansion clip 4 Connector compartment cover 5 Connector compartment cover fi xation screw 2.3 Connector view 2.3.1 MDSC-2226 LED version Overvi...

2. Parts, controls and connectors 2.4 Connector pin assignments 2.4.1 Input power connector Overview Image 2-6 Pin Function 1 GND 2 Not connected 3 +24 VDC 4 GND 5 Shield 6 +24 VDC The ground and the shield connections on the power input connector have no ProtectiveEarth function. A Protective Earth...

3. Display installation 3. DISPLAY INSTALLATION 3.1 VESA mount installation Overview The display supports arm stands according to the VESA 100 mm standard. C AUTION : Use an arm that is approved by VESA. C AUTION : Use an arm that can support a weight of least 10 kg (22,05 lbs). The monitor VESA int...

3. Display installation 3.2 Cover removal To remove the connector compartment cover 1. Loosen the screw fi xing the connector compartment cover. 2. Slide the cover downwards to remove it from the display. 1 2 2 Image 3-2 3.3 Video input connection About video input connections The MDSC-2226 can have...

3. Display installation SDI 1 R/G/B/S 6 / 7 / 8 / 2 R/G/B (SOG) 6 / 7 / 8 Y/Pb/Pr 7 / 8 / 6 CVBS 3 S-Video 9 (*) PC analog (VGA) input source can be connected to the DVI-I input connector using a DVI-I to VGAadapter. The use of an adapter cable of at least 0.15 m long will allow an easy placement in...

3. Display installation 4 5 6 7 8 1 2 9 3 Image 3-5 Nexxis 3 DVI or VGA (*) 4 DisplayPort 5 R/G/B/S 6 / 7 / 8 / 1 Y/Pb/Pr 7 / 8 / 6 CVBS 2 S-Video 9 (*) PC analog (VGA) input source can be connected to the DVI-I input connector using a DVI-I to VGAadapter. The use of an adapter cable of at least 0.1...

3. Display installation 4 1 2 3 Image 3-6 SDI 1 CVBS 2 S-Video 3 DVI 4 (to be con fi gured in OSD menu) 3.4.2 MDSC-2226 DDI version To connect the video outputs 1. Connect one or more of the available video sink(s) to the corresponding video outputs using the appro- priate video cable(s). 5 2 3 4 1 ...

3. Display installation 3.4.3 MDSC-2226 MNA version To connect the video outputs 1. Connect one or more of the available video sink(s) to the corresponding video outputs using the appro- priate video cable(s). 3 1 2 Image 3-8 CVBS 1 S-Video 2 DVI 3 (to be con fi gured in OSD menu) Nexxis 3 (to be co...

3. Display installation 2. Plug the other end of the external DC power supply into a grounded power outlet by means of the proper power cord delivered in the packaging. Note: The ground and the shield connections on the power input connector have no Protective Earthfunction. A Protective Earth conne...

4. Daily operation 4. DAILY OPERATION 4.1 Keyboard backlight About the keyboard backlight By default only the stand-by key is visible. When you touch any of the keys shortly, the backlight of allother keys is switched on for a few seconds. When you touch any of these keys again while the backlightis...

4. Daily operation The time-out of the OSD menu automatic close function can be adjusted or disabled inthe OSD menu ( OSD Time-out ). The OSD menu position can be adjusted in the OSD menu ( OSD Hor. Pos. and OSD Vert. Pos. ). 4.4 OSD menu navigation OSD menu structure explained Below is on example o...

4. Daily operation • Press the key to open the OSD menu. • Use the or key to scroll to the desired menu page. • When the desired Menu page is highlighted, press the key to select the top menu item that will be highlighted. • Use the or keys to move to other Menu Items, then press the key to select i...

4. Daily operation Brightness 50 Image 4-4 When the extended keyboard functionality is enabled, this shortkey functions will re-main available. 4.6 Extended keyboard functions About extended keyboard functions The concept of the extended keyboard is to present a large selection of functions immediat...

4. Daily operation Main source selection 1 Second source selection 2 Multi-image con fi guration Color temperature selectionImage size selection 3 Zoom factor selection 4.6.1 Main source selection To quickly select the main source 1. While no OSD Menu is on the screen, press the Input selection key ...

4. Daily operation Common Functions ITU 709 6500°K DICOM Native Aspect Zoom 10% E X I T Image 4-10 Note: Only a subset of image size settings is available via this quick selection menu. More image sizesettings can be selected in the OSD menus. 4.6.6 Zoom factor selection To quickly select the zoom f...

4. Daily operation Keyboard lock Sequence: 5 - 6 - 6 - 3 Image 4-12 (451920610993)K5903021 MDSC-2226 01/03/2013 31

5. Advanced operation 5. ADVANCED OPERATION 5.1 OSD picture menu Overview • Pro fi le • Brightness • Contrast • Saturation • Color temperature • Gamma • Sharpness 5.1.1 Pro fi le About pro fi les To select a pro fi le means to load a set of prede fi ned video parameters like Brightness, Contrast, Sa...

5. Advanced operation 5.2 Picture Advanced menu Overview • Black Level • Smart Video • Image Position • Auto Adjustment • Phase • Clock/Line 5.2.1 Black Level To adjust the black level 1. Bring up the OSD main menu. 2. Navigate to the Picture advanced menu. 3. Enter the Black Level submenu. The comm...

5. Advanced operation 5.3 Display Format menu Overview • Main Source (Primary Source) • Component Mode • Zoom • Image Size • 2 nd Picture Mode • 2 nd Picture Source • 2 nd Picture Position • Picture Swap 5.3.1 Main Source (Primary Source) About main sources The available main sources for your displa...

5. Advanced operation 4. Select one of the available pro fi les to recall and con fi rm. 5.4.7 Save Pro fi le About saving pro fi les The user can modify the default video parameters associated to each pro fi le and save the new parameters setting under the User 1, User 2 or User 3 pro fi le. The Fa...

6. Important information 6. IMPORTANT INFORMATION 6.1 Safety information General recommendations Read the safety and operating instructions before operating the equipment. Retain safety and operating instructions for future reference. Adhere to all warnings on the equipment and in the operating inst...

6. Important information • The equipment must be earthed by a minimum 18 AWG, maximum 6 foot (1,8m) long wire connectedto the ground connection at the rear. • The compliance of this monitor with Medical Safety and EMC requirements has been evaluated usingthe external (optional) Skynet medical power ...

6. Important information Technical data • The monitor is intended for indoor use • The monitor has been designed to be used in landscape position with a tilt of -10° (backward) and+10° (forward) • Power consumption: 24VDC 2.5A • Operating Temperature: 10-35°C for performance / 0-40°C for safety • Op...

6. Important information Turkey RoHS compliance Republic of Turkey: In conformity with the EEE Regulation Türkiye Cumhuriyeti: EEE Yönetmeli ğ ine Uygundur 中 国 大 陆 ROHS (Chinese Mainland RoHS) 根据中国大 陆 《 电 子信息 产 品 污 染控制管 理 办 法》（也称 为 中国大 陆 RoHS ）， 以下部分 列 出 了 Barco 产 品 中可能 包含 的有 毒和 / 或 有 害物 质 的 名称和 含 量...

6. Important information 零 件 项 目 ( 名 称 ) Component name 有 毒 有 害 物 质 或 元 素 Hazardous substances and elements 铅 Pb 汞 Hg 镉 Cd 六 价 铬 Cr6+ 多 溴联 苯 PBB 多 溴 二 苯 醚 PBDE O: 表示 该 有毒有害物 质 在 该 部件所有均 质 材料中的含量均在 SJ/T 11363-2006 标 准 规 定的限量要求以下 . O: Indicates that this toxic or hazardous substance contained in all o...

6. Important information 6.4 Regulatory compliance information Indications for use This device is intended to be used in operation rooms, to display images from endoscopic cameras, roomand boom cameras, ultrasound, cardiology, PACS, anesthesiology and patient information. It is not in-tended for dia...

6. Important information Possible cleaning solutions • 70 percent isopropyl alcohol • 1.6 percent aqueous ammonia • Cidex® (2.4 percent glutaraldehyde solution) • Sodium hypochlorite (bleach) 10 percent • “Green soap” (USP) • 0.5 percent Chiorhexidine in 70 percent isopropyl alcohol. • Like Cleansaf...

6. Important information Consult the operating instructions Indicates this apparatus must not be thrown inthe trash but must be recycled, according to theEuropean WEEE (Waste Electrical and ElectronicEquipment) directive 6.7 Legal disclaimer Disclaimer notice Although every attempt has been made to ...

6. Important information Storage temperature -20 ÷ +60°C Operating humidity 10 ÷ 90% (non-condensing) Storage humidity 10 ÷ 90% (non-condensing) Operating altitude 3000 m max. Storage altitude 12000 m max. Dimensions 642 mm (25.28”) 86 mm (3.39”) 421 mm (16.57”) 100 mm (3.94”) 100 mm (3.94”) Image 6...

6. Important information 6.9 Warranty statement Barco HC General Warranty Terms and Conditions Applicable from Jan 1st 2008 Article 1: Product warranty Barco nv, Medical Imaging Division warrants that the equipment will be free of defects in workmanship ormaterial for the warranty period or the spec...

6. Important information Eg2• A display is used at 24 hours/day; ie. 8.760hours/year • The display system is covered with a warranty program of 5 year • The Guaranteed Backlight Lifetime of that model is 17.000hours. • The Factory Calibrated Luminance cannot be achieved anymore after 2.5years, thus ...

6. Important information 3.2 Repairs to equipment under warranty resulting from improper maintenance or repair performed by theCustomer, or its of fi cers, agents, employees, or representatives, shall be borne by the Customer at its additional cost and expense. 3.3 The Customer is responsible for in...

6. Important information 6.10 Open source license information Open source license information Open source license This product contains software components released under an Open Source license. A copy of thesource code is available on request by contacting your HC customer support representative at...

FIMI S.r.l. Via S. Banfi, 1 21047 Saronno Italy www.barco.com K5903021-02 (451920610993) March 2013