Axis P1428-E - Manual

AXIS P1428–E Network Camera Hardware Overview SD Card Slot A microSD card (not included) can be used for local recording with removable storage. For more information, see Technical Specifications on page 55 . NO NO NOTICE TICE TICE To prevent corruption of recordings, the SD card should be unmounted...

AXIS P1428–E Network Camera Access the Product Access the Product To install the Axis product, refer to the Installation Guide supplied with the product. The product can be used with most operating systems and browsers. The recommended browsers are Internet Explorer with Windows,Safari with Macintos...

AXIS P1428–E Network Camera Access the Product The default administrator user name root is permanent and cannot be deleted. If the password for root is lost, the product must be reset to the factory default settings. See Reset to Factory Default Settings on page 50 . To set the password via a standa...

AXIS P1428–E Network Camera Access the Product Click Snapshot to save a snapshot of the video image. This button is primarily intended for use when the AXIS Media Control viewer toolbar is not available. Enable this button from Live View Config > Action Buttons . The product’s heater is controlle...

AXIS P1428–E Network Camera Media Streams Media Streams The Axis product provides several video stream formats. Your requirements and the properties of your network will determine thetype you use. The Live View page in the product provides access to H.264 and Motion JPEG video streams, and to the li...

AXIS P1428–E Network Camera Media Streams The AMC Control Panel can be used to configure various video settings. Please see the AXIS Media Control User’s Manual for moreinformation. The AMC Control Panel is automatically installed on first use, after which it can be configured. Open the AMC Control ...

AXIS P1428–E Network Camera Set Up the Product Set Up the Product The Axis product can be configured by users with administrator or operator rights. To open the product’s Setup pages, click Setup in the top right-hand corner of the Live View page. • Administrators have unrestricted access to all set...

AXIS P1428–E Network Camera Video Video It is possible to configure the following video features in your Axis product: • Video stream. See page 16 . • Stream profiles. See page 17 . • Camera settings. See page 18 . • View areas. See page 19 . • Overlay image. See page 20 . • Privacy mask. See page 2...

AXIS P1428–E Network Camera Video • Overlay settings . See Overlay on page 20 . Click Save to apply the new settings. H.264 H.264, also known as MPEG-4 Part 10/AVC, is a video compression standard that provides high quality video streams at low bit rates.An H.264 video stream consists of different t...

AXIS P1428–E Network Camera Video For quick setup, use one of the predefined stream profiles. Each predefined profile has a descriptive name, indicating its purpose. Ifrequired, the predefined stream profiles can be modified and new customized stream profiles can be created. To create a new profile ...

AXIS P1428–E Network Camera Video • Low noise to prioritize low noise. It is also possible to set the Min and Max limits for Shutter and Gain . Shutter is related to the amount of time the shutter is opened and is measured in seconds (s). A slow shutter speed allows more light to reach the sensor an...

AXIS P1428–E Network Camera Video 7. Click Save to save the settings. To modify a view area, select the view area in the list and modify the settings as required. Click Save . To remove a view area, select the view area and click Remove . Note The PTZ functionality is useful during installation of t...

AXIS P1428–E Network Camera Video Privacy Mask A privacy mask is a user-defined area that prevent users from viewing parts of the monitored area. Privacy masks appear as blocksof solid color and are applied on the video stream. Privacy masks cannot be bypassed using the VAPIX® application programmin...

AXIS P1428–E Network Camera Configure the Live View Page Configure the Live View Page You can customize the Live View page and alter it to suit your requirements. It is possible to define the following features ofthe Live View page. • Stream Profile. See page 17 . • Default Viewer for Browser. See p...

AXIS P1428–E Network Camera Configure the Live View Page • Select Use PTZ joystick mode as default to enable joystick mode. The mode can be changed temporarily from the PTZ control panel. • Select Enable recording button to enable recording from the Live View page. This button is available when usin...

AXIS P1428–E Network Camera PTZ (Pan Tilt Zoom) PTZ (Pan Tilt Zoom) The PTZ menu is available if digital PTZ (pan, tilt and zoom) is enabled in the selected view area. For more information on view areas,see View Area on page 19 . Preset Positions A preset position is a saved view that can be used to...

AXIS P1428–E Network Camera PTZ (Pan Tilt Zoom) Control Queue The administrator can set up a queue for PTZ controllers from PTZ > Control Queue . Once set up, the PTZ Control Queue buttons appear in the Live View page offering one viewer exclusive control for a limited period of time. Other users...

AXIS P1428–E Network Camera Detectors Detectors Camera Tampering Camera Tampering can generate an alarm whenever the camera is repositioned, or when the lens is covered, sprayed or severelydefocused. To send an alarm, for example an email, an action rule must be set up. To configure tampering: 1. Go...

AXIS P1428–E Network Camera Detectors Note • Using the motion detection feature may decrease the product’s overall performance. • The position of the Motion Detection Window is relative to the orientation of the Camera. Changing the orientation of the camera will also change the position of the Moti...

AXIS P1428–E Network Camera Applications Applications Third party applications can be uploaded to and installed on the Axis product. Applications add functionality to the product, forexample video analytics and intelligent video capabilities such as recognition, tracking, detection and counting. For...

AXIS P1428–E Network Camera Events Events The Event pages allow you to configure the Axis product to perform actions when different events occur. For example, the productcan start a recording or send an email notification when motion is detected. The set of conditions that defines how and whenthe ac...

AXIS P1428–E Network Camera Events For more information, see the online help . Triggers Available action rule triggers and conditions include: • Applications – Use installed applications to trigger the rule. See Applications on page 30 . • Detectors - Day/Night Mode – Trigger the rule when the produ...

AXIS P1428–E Network Camera Events • Time - Recurrence – Trigger the rule periodically. See Set Up Recurrences on page 36 . This can for example be used to upload an image every 5 minutes. - Use Schedule – Trigger the rule according to the selected schedule. See Create Schedules on page 35 . Actions...

AXIS P1428–E Network Camera Events FTP Send Images Send Video Clip HTTP Send Images Send Notification Send Video Clip HTTPS Send Images Send Notification Send Video Clip Encrypted file transfer using HyperText Transfer ProtocolSecure (HTTPS). Specify login information for the HTTPS server and valida...

AXIS P1428–E Network Camera Events 2. Enter a descriptive name and the information needed for a daily, weekly, monthly or yearly schedule. 3. Click OK . To use the schedule in an action rule, select the schedule from the Schedule drop-down list in the Action Rule Setup page. Set Up Recurrences Recur...

AXIS P1428–E Network Camera Recordings Recordings The Axis product can be configured to record video continuously or according to an action rule: • To start a continuous recording, see page 37 . • To set up action rules, see page 32 . • To access recordings, see Recording List on page 37 . • To conf...

AXIS P1428–E Network Camera Languages Languages Multiple languages can be installed in the Axis product. All web pages including the online help will be displayed in the selectedlanguage. To switch languages, go to Setup > Languages and first upload the new language file. Browse and locate the fi...

AXIS P1428–E Network Camera System Options System Options Security Users User access control is enabled by default and can be configured under System Options > Security > Users . An administrator can set up other users by giving them user names and passwords. It is also possible to allow anony...

AXIS P1428–E Network Camera System Options 2. Select an HTTPS certificate from the list of installed certificates. 3. Optionally, click Ciphers and select the encryption algorithms to use for SSL. 4. Set the HTTPS Connection Policy for the different user groups. 5. Click Save to enable the settings....

AXIS P1428–E Network Camera System Options To install a self-signed certificate: 1. Go to Setup > System Options > Security > Certificates . 2. Click Create self-signed certificate and provide the requested information. To create and install a CA-signed certificate: 1. Create a self-signed ...

AXIS P1428–E Network Camera System Options IPv4 Address Configuration By default, the Axis product is set to use IPv4 (IP version 4) and to obtain the IP address automatically via DHCP. The IPv4 settings areconfigured under System Options > Network > TCP/IP > Basic . DHCP (Dynamic Host Conf...

AXIS P1428–E Network Camera System Options 5. Close the command prompt when the product responds with Reply from 192.168.0.125:... or similar. 6. Open a browser and type http://<IP address> in the Location/Address field. For other methods of assigning the IP address, see the Installation and M...

AXIS P1428–E Network Camera System Options NTP Configuration NTP (Network Time Protocol) is used to synchronize the clock times of devices in a network. The NTP settings are configured under System Options > Network > TCP/IP > Advanced . Select Obtain NTP server address via DHCP to use the ...

AXIS P1428–E Network Camera System Options Use manually selected NAT router - Select this option to manually select a NAT router and enter the IP address for the router in the field. If no router is specified, the product automatically searches for NAT routers on your network. If more than one route...

AXIS P1428–E Network Camera System Options Traps are used by the Axis product to send messages to a management system on important events and status changes. Check Enable traps and enter the IP address where the trap message should be sent and the Trap community that should receive the message. Note...

AXIS P1428–E Network Camera System Options Storage SD Card NO NO NOTICE TICE TICE To prevent corruption of recordings, the SD card should always be unmounted before it is ejected. Note For SD card recommendations see www.axis.com Supports microSD cards with up to 64 GB of storage. For best recording...

AXIS P1428–E Network Camera System Options Ports & Devices I/O Ports The Axis product provides one input port and one output port for connection of external devices. For information about how toconnect external devices, see Connectors on page 57 . The I/O ports are configured under System Option...

AXIS P1428–E Network Camera System Options System Overview To get an overview of the Axis product’s status and settings, go to System Options > Support > System Overview . Information that can be found here includes firmware version, IP address, network and security settings, event settings, i...

AXIS P1428–E Network Camera System Options Plain Config Plain Config is for advanced users with experience of Axis product configuration. Most parameters can be set and modified fromthis page. To open Plain Config, go to System Options > Advanced > Plain Config . Axis Support does not provide ...

AXIS P1428–E Network Camera Troubleshooting Troubleshooting Check the Firmware Firmware is software that determines the functionality of network devices. One of your first actions when troubleshooting a problemshould be to check the current firmware version. The latest version may contain a correcti...

AXIS P1428–E Network Camera Troubleshooting 5. Reinstall the product, referring to the Installation Guide. If the emergency recovery procedure does not get the product up and running again, contact Axis support at www.axis.com/techsup/ Symptoms, Possible Causes and Remedial Actions Problems setting ...

AXIS P1428–E Network Camera Troubleshooting Storage and disk management problems Storage disruption A storage disruption alarm is sent if a storage device is unavailable, removed, full, locked or if otherread or write problems occur. To identify the source of the problem, check the System Log under ...

AXIS P1428–E Network Camera Technical Specifications Technical Specifications Function/group Item Specifications Models AXIS P1428–E Image sensor 1/2.5” progressive scan CMOS Lens f 3.3-9.8 mmF1.6AutofocusAutomatic day and night functionalityHorizontal angle of view: 35° - 109°Vertical angle of view...

AXIS P1428–E Network Camera Technical Specifications Connectors I/O Connector 4–pin terminal block for: • Auxiliary power (DC output)• Digital Input• Digital Output• 0 V DC (-) 1 2 3 4 Function Pin Notes Specifications 0 V DC (-) 1 0 V DC DC output 2 Can be used to power auxiliary equipment.Note: Th...

AXIS P1428–E Network Camera Technical Specifications Performance Considerations When setting up your system, it is important to consider how various settings and situations will affect performance. Some factorsaffect the amount of bandwidth (the bit rate) required, others can affect the frame rate, ...