Page 3 - WARNING; Support
be connected using a shielded network cable (STP) that is properlygrounded. Japan この装置は、クラスB 情報技術装置です。この装置は、家 庭環境で使用することを目 的としていますが、この装置がラジオやテレビジョン受信機に近接して使用されると、 受信障害を引き起こすことがあります。 取扱説明書に従って 正しい取り扱いをして下さい。 本製品は、シールドネットワークケーブル(STP)を使用して接続してください。また適切に接地してください。 Korea 이 기기는 가정용(B급) 전자파적합기기로서 주로 가정에 서 사...
Page 4 - AXIS P3225-LV Network Camera; Safety Information; Hazard Levels; DANGER; Other Message Levels
AXIS P3225-LV Network Camera Safety Information Safety Information Hazard Levels DANGER Indicates a hazardous situation which, if not avoided, will result in death or serious injury. WARNING Indicates a hazardous situation which, if not avoided, could result in death or serious injury. CAUTION Indic...
Page 5 - Table of Contents
AXIS P3225-LV Network Camera Table of Contents Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Hazard Levels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Other Message Levels . . . . ....
Page 7 - Hardware Overview; Connectors and Buttons; Network Connector; SD Card Slot; Unmount; Control Button
AXIS P3225-LV Network Camera Hardware Overview Hardware Overview 1 2 3 4 5 1 Network connector (PoE) 2 SD memory card slot 3 Part number (P/N) & Serial number 4 Control button 5 Status LED indicator Connectors and Buttons For technical specifications, see page 60 . Network Connector RJ45 Etherne...
Page 8 - LED Indicators; Status LED
AXIS P3225-LV Network Camera Hardware Overview • Resetting the product to factory default settings. See page 56 . • Connecting to an AXIS Video Hosting System service. See page 49 . To connect, press and hold the button for about 3 seconds until the Status LED flashes green. • Connecting to AXIS Int...
Page 9 - Access the Product; Access from a Browser; Access from the Internet
AXIS P3225-LV Network Camera Access the Product Access the Product To install the Axis product, see the Installation Guide supplied with the product. The product can be used with most operating systems and browsers. The recommended browsers are • Internet Explorer ® with Windows ® • Safari ® with OS...
Page 10 - Set the Root Password; Camera Orientation; Configure Capture Mode
AXIS P3225-LV Network Camera Access the Product For Technical notes on this and other topics, visit the Axis Support web at www.axis.com/techsup Set the Root Password To access the Axis product, you must set the password for the default administrator user root . This is done in the Configure Root Pa...
Page 11 - Set Power Line Frequency; Controls on the Live View Page; Manual Trigger
AXIS P3225-LV Network Camera Access the Product Set Power Line Frequency Power line frequency is set the first time the Axis product is accessed and can only be changed from Plain Config (see page 56 ) or by resetting the product to factory default. Select the power line frequency (50 Hz or 60 Hz) u...
Page 12 - AXIS Media Control viewer toolbar
AXIS P3225-LV Network Camera Access the Product 4. From the second drop-down list, select Manual Trigger . 5. Select the desired action and configure the other settings as required. For more information about action rules, see Events on page 37 . To show the manual trigger buttons in the Live View p...
Page 13 - Pan and Tilt bars; Zoom bar
AXIS P3225-LV Network Camera Access the Product Pan and Tilt bars – Use the arrows to pan and tilt the camera view, or click on a position on the bar to steer the camera view to that position. Zoom bar – Use the arrows to zoom in and out, or click on a position on the bar to zoom to that position. T...
Page 14 - Media Streams; MJPEG
AXIS P3225-LV Network Camera Media Streams Media Streams The Axis product provides several video stream formats. Your requirements and the properties of your network will determine thetype you use. The Live View page in the product provides access to H.264 and Motion JPEG video streams, and to the l...
Page 15 - Settings; Alternative Methods of Accessing the Video Stream; Motion JPEG server push
AXIS P3225-LV Network Camera Media Streams The AMC Control Panel can be used to configure various video settings. Please see the AXIS Media Control User’s Manual for moreinformation. The AMC Control Panel is automatically installed on first use, after which it can be configured. Open the AMC Control...
Page 17 - Set Up the Product; Basic Setup
AXIS P3225-LV Network Camera Set Up the Product Set Up the Product The Axis product can be configured by users with administrator or operator rights. To open the product’s Setup pages, click Setup in the top right-hand corner of the Live View page. • Administrators have unrestricted access to all se...
Page 18 - Video; Set Up Video Streams; Pixel Counter
AXIS P3225-LV Network Camera Video Video It is possible to configure the following video features in your Axis product: • Video stream. See page 18 . • Stream profiles. See page 20 . • Camera settings. See page 20 . • View areas. See page 23 . • Overlay image. See page 23 . • Privacy mask. See page ...
Page 19 - Axis’ Zipstream Technology
AXIS P3225-LV Network Camera Video • Maximum frame rate . To avoid bandwidth problems, the frame rate allowed to each viewer can be Limited to a fixed amount. Alternatively, the frame rate can be set as Unlimited , which means the Axis product always delivers the highest frame rate possible under th...
Page 20 - Stream Profiles; Camera Settings; Capture Mode
AXIS P3225-LV Network Camera Video • Medium Zipstream strength . Medium bandwidth reduction. Limited visual quality degradation in not prioritized areas in some scenes • Highest Zipstream strength . High bandwidth reduction. Visible quality degradation in not prioritized areas in many scenes Lowest ...
Page 21 - Image Appearance
AXIS P3225-LV Network Camera Video To change capture mode, follow these steps: 1. Go to Setup > Video > Camera Settings . 2. Select the new capture mode. 3. Click Save . 4. Review and reconfigure all settings, for example: - View areas - Stream profiles - PTZ settings including preset position...
Page 22 - Exposure Settings; Iris adjustment
AXIS P3225-LV Network Camera Video Important Use WDR in combination with automatic exposure control. Other exposure settings could give undesirable results. Exposure Settings Configure the exposure settings to suit the image quality requirements in relation to lighting, frame rate and bandwidthconsi...
Page 23 - Built-in IR Illuminations LEDs; View Area
AXIS P3225-LV Network Camera Video Built-in IR Illuminations LEDs WARNING Risk of eye injury. Do not look directly into the IR LED at short distance. Since the light provided from the IR LED is outside ofthe visible range, it is not possible to see if it is active. Use the camera to check if the IR ...
Page 24 - Overlay Image
AXIS P3225-LV Network Camera Video An overlay text can display the current date and time, or a text string. When using a text string, modifiers can be used to displayinformation such as the current bit rate or the current frame rate. For information about available modifiers, see File Naming & D...
Page 25 - Privacy Mask
AXIS P3225-LV Network Camera Video To select the image to use as overlay: 1. Go to Video > Overlay Image . 2. Select the image to use from the Use overlay image list and click Save . To display the overlay image: 1. Go to Video > Video Stream and select the Image tab. 2. Under Overlay Settings...
Page 27 - Configure the Live View Page; Default Viewer for Browsers
AXIS P3225-LV Network Camera Configure the Live View Page Configure the Live View Page You can customize the Live View page and alter it to suit your requirements. It is possible to define the following features ofthe Live View page. • Stream Profile. See page 20 . • Default Viewer for Browser. See ...
Page 28 - Enable recording button; User Defined Links; Show custom link
AXIS P3225-LV Network Camera Configure the Live View Page • Select Enable recording button to enable recording from the Live View page. This button is available when using the AMC viewer. The recordings are saved to the location specified in the AMC Control Panel. See AXIS Media Control (AMC) on pag...
Page 29 - Access the Preset Positions; Set the Home Position; Guard Tour
AXIS P3225-LV Network Camera PTZ (Pan Tilt Zoom) PTZ (Pan Tilt Zoom) The PTZ menu is available if digital PTZ (pan, tilt and zoom) is enabled in the selected view area. For more information on view areas,see View Area on page 23 . Preset Positions A preset position is a saved view that can be used t...
Page 30 - Advanced; Controls; Control Queue
AXIS P3225-LV Network Camera PTZ (Pan Tilt Zoom) 3. Specify the pause length between runs. 4. Select an available preset position and click Apply . 5. Specify the View Time in seconds or minutes. 6. Specify the View Order or select the Random view order option. 7. Click Save . To modify or remove gu...
Page 31 - Event; Operator
AXIS P3225-LV Network Camera PTZ (Pan Tilt Zoom) 2. Event — The Axis product can be configured to go to a preset position when triggered by an alarm (see Events on page 37 ). The event will immediately be placed first in the queue except when an administrator is in control. 3. Operator — Same as adm...
Page 32 - Detectors; Camera Tampering; Motion Detection
AXIS P3225-LV Network Camera Detectors Detectors Camera Tampering Camera Tampering can generate an alarm whenever the camera is repositioned, or when the lens is covered, spray-painted or severelydefocused. To send an alarm, for example an email, an action rule must be set up. To configure tampering...
Page 33 - Set Up Motion Detection Windows; Motion Detection Parameters
AXIS P3225-LV Network Camera Detectors Note • Using the motion detection feature may decrease the product’s overall performance. • The position of the Motion Detection Window is relative to the orientation of the Camera. Changing the orientation of the camera will also change the position of the Mot...
Page 35 - Applications; Application Licenses
AXIS P3225-LV Network Camera Applications Applications Third party applications can be uploaded to and installed on the Axis product. Applications add functionality to the product, forexample video analytics and intelligent video capabilities such as recognition, tracking, detection and counting. Fo...
Page 37 - Events; Convert Event Types to Action Rules; Set Up Action Rules; Triggers
AXIS P3225-LV Network Camera Events Events The Event pages allow you to configure the Axis product to perform actions when different events occur. For example, the productcan start a recording or send an email notification when motion is detected. The set of conditions that defines how and whenthe a...
Page 38 - Actions
AXIS P3225-LV Network Camera Events - Temperature – Trigger the rule if the temperature falls outside or inside the operating range of the product. This can for example be used to send maintenance notifications. • Input Signal - Manual Trigger – Trigger the rule using the Manual Trigger button in th...
Page 39 - Add Recipients; Recipient Types
AXIS P3225-LV Network Camera Events • Send SNMP Trap – Send an SNMP trap message to the operator. Make sure that SNMP is enabled and configured under System Options > Network > SNMP . • Send Video Clip – Send a video clip to a recipient. • WDR Mode – The WDR Mode can be turned on or off when t...
Page 40 - Set Up Email Recipients; Create Schedules
AXIS P3225-LV Network Camera Events HTTPS Send Images Send Notification Send Video Clip Encrypted file transfer using HyperText Transfer ProtocolSecure (HTTPS). Specify login information for the HTTPS server and validatethe server’s certificate. If there is a proxy between the Axisproduct and the HT...
Page 41 - Set Up Recurrences
AXIS P3225-LV Network Camera Events Set Up Recurrences Recurrences are used to trigger action rules repeatedly, for example every 5 minutes or every hour. To set up a recurrence: 1. Go to Events > Recurrences and click Add . 2. Enter a descriptive name and recurrence pattern. 3. Click OK . To use...
Page 42 - Recordings; Find Recordings
AXIS P3225-LV Network Camera Recordings Recordings The Axis product can be configured to record video continuously or according to an action rule: • To start a continuous recording, see page 43 . • To set up action rules, see page 37 . • To access recordings, see Find Recordings on page 42 . • To pl...
Page 43 - Export Video Clip; Continuous Recording
AXIS P3225-LV Network Camera Recordings To play a recording, follow these steps: 1. Go to Recordings > List . 2. To reduce the number of recordings displayed, select the desired options under Filter and click the Filter button to apply the filters. See also Find Recordings on page 42 . 3. Select ...
Page 44 - Languages; Setup; Upload Language; Restore
AXIS P3225-LV Network Camera Languages Languages Multiple languages can be installed in the Axis product. All web pages including the online help will be displayed in the selectedlanguage. To switch languages, go to Setup > Languages and first upload the new language file. Browse and locate the f...
Page 45 - System Options; Security; Users
AXIS P3225-LV Network Camera System Options System Options Security Users User access control is enabled by default and can be configured under System Options > Security > Users . An administrator can set up other users by giving them user names and passwords. It is also possible to allow anon...
Page 46 - Certificates
AXIS P3225-LV Network Camera System Options 2. Select an HTTPS certificate from the list of installed certificates. 3. Optionally, click Ciphers and select the encryption algorithms to use for SSL. 4. Set the HTTPS Connection Policy for the different user groups. 5. Click Save to enable the settings...
Page 47 - Network; Basic TCP/IP Settings
AXIS P3225-LV Network Camera System Options A Server/Client certificate can be self-signed or issued by a Certificate Authority (CA). A self-signed certificate offers limited protection and can be used before a CA-issued certificate has been obtained. To install a self-signed certificate: 1. Go to S...
Page 48 - IPv4 Address Configuration; Enable ARP/Ping setting of IP address
AXIS P3225-LV Network Camera System Options IPv4 Address Configuration By default, the Axis product is set to use IPv4 (IP version 4) and to obtain the IP address automatically via DHCP. The IPv4 settings areconfigured under System Options > Network > TCP/IP > Basic . DHCP (Dynamic Host Con...
Page 49 - AXIS Internet Dynamic DNS Service; Advanced TCP/IP Settings; DNS Configuration
AXIS P3225-LV Network Camera System Options 5. Close the command prompt when the product responds with Reply from 192.168.0.125:... or similar. 6. Open a browser and type http://<IP address> in the Location/Address field. For other methods of assigning the IP address, see the document Assign a...
Page 50 - NTP Configuration
AXIS P3225-LV Network Camera System Options NTP Configuration NTP (Network Time Protocol) is used to synchronize the clock times of devices in a network. The NTP settings are configured under System Options > Network > TCP/IP > Advanced . Select Obtain NTP server address via DHCP to use the...
Page 51 - Use manually selected NAT router -; SOCKS
AXIS P3225-LV Network Camera System Options Use manually selected NAT router - Select this option to manually select a NAT router and enter the IP address for the router in the field. If no router is specified, the product automatically searches for NAT routers on your network. If more than one rout...
Page 52 - UPnP; Bonjour
AXIS P3225-LV Network Camera System Options Traps are used by the Axis product to send messages to a management system on important events and status changes. Check Enable traps and enter the IP address where the trap message should be sent and the Trap community that should receive the message. Not...
Page 53 - SD Card; Mount and Unmount SD Card
AXIS P3225-LV Network Camera System Options Storage SD Card NO NO NOTICE TICE TICE To prevent data corruption, the SD card should be unmounted before removal. Note For SD card recommendations see www.axis.com The Axis product supports microSD/microSDHC/microSDXC cards. The following SD card file sys...
Page 54 - Network Share; Maintenance
AXIS P3225-LV Network Camera System Options To enable automatic formatting, follow these steps: 1. Open the Axis product’s webpages and go to Setup > System Options > Storage . 2. Click SD Card . 3. Under General Settings , select Autoformat to . 4. Click OK to save settings. An SD card insert...
Page 55 - Support Overview; System Options > Support > Support Overview; System Overview; System Options > Support > System Overview
AXIS P3225-LV Network Camera System Options Click Restore to reset most settings to the factory default values. The following settings are not affected: • the boot protocol (DHCP or static) • the static IP address • the default router • the subnet mask • the system time • the IEEE 802.1X settings • ...
Page 56 - Scripting; File Upload
AXIS P3225-LV Network Camera System Options Advanced Scripting Scripting allows experienced users to customize and use their own scripts. NO NO NOTICE TICE TICE Improper use may cause unexpected behavior and loss of contact with the Axis product. Axis strongly recommends that you do not use this fun...
Page 57 - Troubleshooting; Check the Firmware; Upgrade Server; Symptoms, Possible Causes and Remedial Actions; Problems setting the IP address
AXIS P3225-LV Network Camera Troubleshooting Troubleshooting Check the Firmware Firmware is software that determines the functionality of network devices. One of your first actions when troubleshooting a problemshould be to check the current firmware version. The latest version may contain a correct...
Page 58 - The product cannot be accessed from a browser; The product is accessible locally but not externally; Basic
AXIS P3225-LV Network Camera Troubleshooting The IP address is being usedby another device Disconnect the Axis product from the network. Run the Ping command (in a Command/DOSwindow, type ping and the IP address of the product): • If you receive: Reply from <IP address>: bytes=32; time=10... t...
Page 60 - Technical Specifications; Color
AXIS P3225-LV Network Camera Technical Specifications Technical Specifications Camera Image sensor Progressive scan RGB CMOS 1/2.8” Lens Varifocal, 3.0–10.5 mm, F1.4Horizontal angle of view 92°–34°Vertical angle of view 50°–20°Remote focus and zoom, P-Iris control, IR corrected Day and night Automat...
Page 62 - Warranty; Performance Considerations
AXIS P3225-LV Network Camera Technical Specifications Warranty Axis 3-year warranty and AXIS Extended Warranty option, see www.axis.com/warranty a. This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit. (www.openssl.org), and cryptographic software written by...
