Page 3 - Support
Safety This product complies with IEC/EN 60950-1, Safety of InformationTechnology Equipment. If its connecting cables are routed outdoors,the product shall be grounded either through a shielded network cable(STP) or other appropriate method.The power supply used with this product shall fulfill the r...
Page 4 - Table of Contents
AXIS M1054 Network Camera Table of Contents Hardware Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Connectors and Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 LED Indicators . . . . . . . . . . . . . . ...
Page 6 - Connectors and Buttons; Network Connector
AXIS M1054 Network Camera Hardware Overview Hardware Overview 9 6 7 3 4 5 1 8 11 1213 14 2 10 1 Lens with Status LED indicator 2 Microphone 3 Light (white illumination LED) 4 PIR sensor 5 Speaker 6 Network connector (RJ-45) 7 Lock ring 8 Part number (P/N) & Serial number (S/N) 9 Power connector ...
Page 7 - Hardware Overview; Power Connector; LED Indicators
AXIS M1054 Network Camera Hardware Overview • Digital output – For connecting external devices such as relays and LEDs. Connected devices can be activated by the VAPIX® Application Programming Interface, output buttons on the Live View page or by an Action Rule. The output willshow as active (shown ...
Page 8 - Access from a Browser; Access from the Internet; Set the Root Password; root
AXIS M1054 Network Camera Access the Product Access the Product To install the Axis product, refer to the Installation Guide supplied with the product. The product can be used with most operating systems and browsers. The recommended browsers are Internet Explorer with Windows,Safari with Macintosh ...
Page 9 - Access the Product; Create self-signed certificate; Set Power Line Frequency
AXIS M1054 Network Camera Access the Product To prevent network eavesdropping, the root password can be set via an encrypted HTTPS connection, which requires an HTTPScertificate. HTTPS (Hypertext Transfer Protocol over SSL) is a protocol used to encrypt traffic between web browsers and servers. TheH...
Page 10 - Controls on the Live View Page; Manual Trigger
AXIS M1054 Network Camera Access the Product Controls on the Live View Page Click View size to scale the image down to 800 pixels wide or to full scale. Only available in MJPEG. Select a stream profile for the Live View page from the Stream Profile drop-down list. For information about how to config...
Page 11 - AXIS Media Control viewer toolbar; AMC Audio Controls; PTZ Controls
AXIS M1054 Network Camera Access the Product For more information about action rules, see Events on page 34 . To show the manual trigger buttons in the Live View page: 1. Go to Setup > Live View Config . 2. Under Action Buttons , select Show manual trigger button . AXIS Media Control viewer toolb...
Page 12 - PTZ Control Queue; Pan and Tilt bars
AXIS M1054 Network Camera Access the Product With the PTZ Control Queue enabled the time each user is in control of the PTZ settings is limited. Click the buttons to request or release control of the PTZ controls. The PTZ Control Queue is set up under PTZ > Control Queue . Click the Emulate joyst...
Page 13 - MJPEG
AXIS M1054 Network Camera Media Streams Media Streams The Axis product provides several audio and video stream formats. Your requirements and the properties of your network willdetermine the type you use. The Live View page in the product provides access to H.264 and Motion JPEG video streams, audio...
Page 14 - Media Streams; Settings; Alternative Methods of Accessing the Video Stream; Motion JPEG server push
AXIS M1054 Network Camera Media Streams The AMC Control Panel can be used to configure various video and audio settings. Please see the AXIS Media Control User’sManual for more information. The AMC Control Panel is automatically installed on first use, after which it can be configured. Open the AMC ...
Page 15 - Access Audio Streams; VAPIX® Application Programming Interface (API); Java applet
AXIS M1054 Network Camera Media Streams Note • <ip>= IP addess • The Axis product supports QuickTime 6.5.1 and later. • QuickTime may add latency to the video stream. • It may be possible to use other players to view the H.264 stream using the paths above, although Axis does not guarantee this...
Page 16 - Setup; Basic Setup
AXIS M1054 Network Camera Set Up the Product Set Up the Product The Axis product can be configured by users with administrator or operator rights. To open the product’s Setup pages, click Setup in the top right-hand corner of the Live View page. • Administrators have unrestricted access to all setti...
Page 17 - Video Stream; Pixel Counter
AXIS M1054 Network Camera Video and Audio Video and Audio The video and audio settings can be used to optimize video and audio quality. You can configure the following: • Video stream settings. See page 17 . • Stream profiles. See page 18 . • Camera settings. See page 19 . • View area. See page 19 ....
Page 18 - Video and Audio; Stream Profiles
AXIS M1054 Network Camera Video and Audio • Maximum frame rate . To avoid bandwidth problems, the frame rate allowed to each viewer can be Limited to a fixed amount. Alternatively, the frame rate can be set as Unlimited , which means the Axis product always delivers the highest frame rate possible u...
Page 19 - Camera Settings; Image Appearance; View Area
AXIS M1054 Network Camera Video and Audio For quick setup, use one of the predefined stream profiles. Each predefined profile has a descriptive name, indicating its purpose. Ifrequired, the predefined stream profiles can be modified and new customized stream profiles can be created. To create a new ...
Page 20 - Overlay; Overlay Image
AXIS M1054 Network Camera Video and Audio 1. Go to Video & Audio > View Area . 2. Select an Aspect ratio and a Video stream resolution . 3. Use the mouse to move and resize the view area. 4. Select Enable PTZ to enable digital PTZ for the view area. 5. Click Save to save the settings. Note Th...
Page 22 - Privacy Mask; Audio Modes; Audio Input
AXIS M1054 Network Camera Video and Audio ExampleTo display the text “Motion detected” when motion is detected, enter #D in the Include text field and enter “Motion detected” in the Text field when setting up the action rule. Privacy Mask A privacy mask is a user-defined area that prevent users from...
Page 23 - Audio Output; Audio Clips
AXIS M1054 Network Camera Video and Audio • Red — the signal is distorted. Use the Encoding option to select digital audio encoding format. • AAC requires a license for both encoding and decoding. AAC is the least complicated and most widely used codec. If achieving the best possible audio quality i...
Page 24 - Default Viewer for Browsers
AXIS M1054 Network Camera Configure the Live View Page Configure the Live View Page You can customize the Live View page and alter it to suit your requirements. It is possible to define the following features ofthe Live View page. • Stream Profile. See page 18 . • Default Viewer for Browser. See pag...
Page 25 - Configure the Live View Page; User Defined Links
AXIS M1054 Network Camera Configure the Live View Page • Select Use PTZ joystick mode as default to enable joystick mode. The mode can be changed temporarily from the PTZ control panel. • Select Enable recording button to enable recording from the Live View page. This button is available when using ...
Page 26 - Access the Preset Positions; Set the Home Position; Guard Tour
AXIS M1054 Network Camera PTZ (Pan Tilt Zoom) PTZ (Pan Tilt Zoom) The PTZ menu is available if digital PTZ (pan, tilt and zoom) is enabled in the selected view area. For more information on view areas,see View Area on page 19 . Preset Positions A preset position is a saved view that can be used to q...
Page 27 - Advanced; Controls; Control Queue
AXIS M1054 Network Camera PTZ (Pan Tilt Zoom) 4. Select an available preset position and click Apply . 5. Specify the View Time in seconds or minutes. 6. Specify the View Order or select the Random view order option. 7. Click Save . To modify or remove guard tours, go to PTZ > Guard Tour , select...
Page 28 - Viewer
AXIS M1054 Network Camera PTZ (Pan Tilt Zoom) 5. Viewer — Multiple viewers must wait for their turn. The viewer has 60 seconds PTZ control before control is passed on to the next viewer in queue. 28
Page 29 - Camera Tampering; Motion Detection
AXIS M1054 Network Camera Detectors Detectors Camera Tampering Camera Tampering can generate an alarm whenever the camera is repositioned, or when the lens is covered, sprayed or severelydefocused. To send an alarm, for example an email, an action rule must be set up. To configure tampering: 1. Go t...
Page 30 - Detectors; Set Up Motion Detection Windows; Motion Detection Parameters
AXIS M1054 Network Camera Detectors Note • Using the motion detection feature may decrease the product’s overall performance. • The position of the Motion Detection Window is relative to the orientation of the Camera. Changing the orientation of the camera will also change the position of the Motion...
Page 31 - Audio Detection; PIR Sensor
AXIS M1054 Network Camera Detectors Note • To trigger on small objects or movements, use several small motion detection windows rather than one large window and select a low object size. • To avoid triggering on small objects, select a high object size. • While monitoring an area where moving object...
Page 32 - Application Licenses
AXIS M1054 Network Camera Applications Applications Third party applications can be uploaded to and installed on the Axis product. Applications add functionality to the product, forexample video analytics and intelligent video capabilities such as recognition, tracking, detection and counting. For i...
Page 33 - Applications
AXIS M1054 Network Camera Applications If the Axis product is reset to factory default, installed applications and their settings are removed. For information about factorydefault, see Reset to Factory Default Settings . 33
Page 34 - Convert Event Types to Action Rules; Set Up Action Rules
AXIS M1054 Network Camera Events Events The Event pages allow you to configure the Axis product to perform actions when different events occur. For example, the productcan start a recording or send an email notification when motion is detected. The set of conditions that defines how and whenthe acti...
Page 35 - Events; Triggers
AXIS M1054 Network Camera Events For more information, see the online help . Triggers Available action rule triggers and conditions include: • Applications – Use installed applications to trigger the rule. See Applications on page 32 . • Detectors - Audio Detection – Trigger the rule when audio is d...
Page 36 - Actions; Add Recipients; Recipient Types
AXIS M1054 Network Camera Events Actions Available actions include: • Activate Light – Turn the built-in light on or off. • Output Port – Activate an I/O port to control an external device. • Overlay Text – Display an overlay text. See Use Overlay Text in an Action Rule on page 21 . • Play Audio Cli...
Page 37 - Set Up Email Recipients; Create Schedules
AXIS M1054 Network Camera Events HTTP Send Images Send Notification Send Video Clip HTTPS Send Images Send Notification Send Video Clip Encrypted file transfer using HyperText Transfer ProtocolSecure (HTTPS). Specify login information for the HTTPS server and validatethe server’s certificate. If the...
Page 38 - Set Up Recurrences
AXIS M1054 Network Camera Events 3. Click OK . To use the schedule in an action rule, select the schedule from the Schedule drop-down list in the Action Rule Setup page. Set Up Recurrences Recurrences are used to trigger action rules repeatedly, for example every 5 minutes or every hour. To set up a...
Page 39 - Recording List
AXIS M1054 Network Camera Recordings Recordings The Axis product can be configured to record video continuously or according to an action rule: • To start a continuous recording, see page 39 . • To set up action rules, see page 34 . • To access recordings, see Recording List on page 39 . • To config...
Page 40 - Recordings; Save
AXIS M1054 Network Camera Recordings 5. Click Save to save and start the recording. 40
Page 41 - Upload Language; Restore
AXIS M1054 Network Camera Languages Languages Multiple languages can be installed in the Axis product. All web pages including the online help will be displayed in the selectedlanguage. To switch languages, go to Setup > Languages and first upload the new language file. Browse and locate the file...
Page 42 - Security; Users
AXIS M1054 Network Camera System Options System Options Security Users User access control is enabled by default and can be configured under System Options > Security > Users . An administrator can set up other users by giving them user names and passwords. It is also possible to allow anonymo...
Page 43 - System Options; Certificates
AXIS M1054 Network Camera System Options 2. Select an HTTPS certificate from the list of installed certificates. 3. Optionally, click Ciphers and select the encryption algorithms to use for SSL. 4. Set the HTTPS Connection Policy for the different user groups. 5. Click Save to enable the settings. T...
Page 44 - Audio Support
AXIS M1054 Network Camera System Options A Server/Client certificate can be self-signed or issued by a Certificate Authority (CA). A self-signed certificate offers limited protection and can be used before a CA-issued certificate has been obtained. To install a self-signed certificate: 1. Go to Setu...
Page 45 - Network; Basic TCP/IP Settings; IPv4 Address Configuration; Enable ARP/Ping setting of IP address
AXIS M1054 Network Camera System Options Network Basic TCP/IP Settings The Axis product supports IP version 4 and IP version 6. Both versions can be enabled simultaneously, and at least one versionmust always be enabled. IPv4 Address Configuration By default, the Axis product is set to use IPv4 (IP ...
Page 46 - AXIS Internet Dynamic DNS Service; Advanced TCP/IP Settings; DNS Configuration
AXIS M1054 Network Camera System Options ping -l 408 -t <IP address> Windows example (this may require that you run the command prompt as an administrator) arp -s 192.168.0.125 00-40-8c-18-10-00ping -l 408 -t 192.168.0.125 4. Check that the network cable is connected and then restart the produ...
Page 47 - NTP Configuration
AXIS M1054 Network Camera System Options Domain name - Enter the domain(s) to search for the host name used by the Axis product. Multiple domains can be separated by semicolons. The host name is always the first part of a fully qualified domain name, for example, myserver is the host name in the ful...
Page 48 - Use manually selected NAT router -; SOCKS
AXIS M1054 Network Camera System Options Note • For NAT traversal to work, this must be supported by the router. The router must also support UPnP TM . • In this context, router refers to any network routing device such as a NAT router, Network router, Internet Gateway, Broadband router, Broadband s...
Page 49 - SNMP; UPnP; Bonjour
AXIS M1054 Network Camera System Options SNMP The Simple Network Management Protocol (SNMP) allows remote management of network devices. An SNMP community is thegroup of devices and management station running SNMP. Community names are used to identify groups. To enable and configure SNMP in the Axis...
Page 50 - Network Share; Port Status; Maintenance
AXIS M1054 Network Camera System Options Storage Network Share Network share allows you to add network storage such as a NAS (network-attached storage). The NAS shall be dedicated forrecordings and data from the Axis products connected to the network. For information about reference NAS devices, go ...
Page 51 - Support Overview; System Overview
AXIS M1054 Network Camera System Options • the static IP address • the default router • the subnet mask • the system time • the IEEE 802.1X settings • uploaded applications are kept but must be restarted Click Default to reset all settings, including the IP address, to the factory default values. Th...
Page 52 - Scripting; File Upload
AXIS M1054 Network Camera System Options Advanced Scripting Scripting allows experienced users to customize and use their own scripts. NO NO NOTICE TICE TICE Improper use may cause unexpected behavior and loss of contact with the Axis product. Axis strongly recommends that you do not use this functi...
Page 53 - Check the Firmware
AXIS M1054 Network Camera Troubleshooting Troubleshooting Check the Firmware Firmware is software that determines the functionality of network devices. One of your first actions when troubleshooting a problemshould be to check the current firmware version. The latest version may contain a correction...
Page 54 - Troubleshooting; Symptoms, Possible Causes and Remedial Actions; Problems setting the IP address; The product cannot be accessed from a browser; The product is accessible locally but not externally; Basic
AXIS M1054 Network Camera Troubleshooting 5. Reinstall the product, referring to the Installation Guide. If the emergency recovery procedure does not get the product up and running again, contact Axis support at www.axis.com/techsup/ Symptoms, Possible Causes and Remedial Actions Problems setting th...
Page 58 - Technical Specifications
AXIS M1054 Network Camera Technical Specifications Function/group Item Specifications Security Password protection, IP address filtering, IEEE 802.1X* network access control, HTTPS*encryption, digest authentication, user access log.*This product includes software developed by the OpenSSL Project for...
Page 59 - Connectors
AXIS M1054 Network Camera Technical Specifications Function/group Item Specifications Casing Rear cover: AluminiumFront cover: Polycarbonate Memory 128 MB RAM, 128 MB Flash Power 4.9-5.1 V DC, max. 6.5 WPower over Ethernet IEEE 802.3af/IEEE 802.3at Type 1 Class 2 (max. 6.49 W) Connectors DC jackRJ45...
Page 60 - Performance Considerations
AXIS M1054 Network Camera Technical Specifications Digital Input 3 Connect to pin 1 to activate, or leave floating (unconnected)to deactivate 0 to max 40 V DC Digital Output 4 Connected to pin 1 when activated, floating (unconnected)when deactivated. If used with an inductive load, e.g. a relay,a di...
