Audiovox SP-6CD - Manual
Audiovox SP-6CD – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – MAIN UNIT; PACKING LIST; INSTALLATION PARTS; OTHER ACCESSORY
- Page 3 – BEFORE INSTALLING THE UNIT; Transport lock screws; Installation and Wiring Precautions
- Page 4 – SETTING THE ANTI-VIBRATION SPRINGS; PROCEDURE FOR HORIZONTAL INSTALLATION
- Page 5 – PROCEDURE FOR VERTICAL INSTALLATION
- Page 6 – PROCEDURE FOR MOUNTING UNDER REAR DECK
- Page 7 – VEHICLE WIRING
MODEL SP-6CD
6 - DISC CD CHANGER SYSTEM
INSTALLATION MANUAL
SP-6CD
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
5 Meter DIN cable (8 pin) 1 pc. Bracket (R) 1 pc. Bracket (L) 1 pc. Self-Tapping Screw (M5 x 12) 4 pcs. Hexagonal Bolt with Washer M5 x 8 4 pcs. Owner's guide 1 pc. MAIN UNIT PACKING LIST Changer INSTALLATION PARTS Installation Manual 1 pc. Index seal sheet 1 pc. CD Magazine 1 pc. Seals 1 pc. OTHER ...
Note If the changer is to be installed in a car that is equipped with an on-board drive or navigation computer, do not disconnectthe battery cable. If the cable is disconnected, the computer memory may be lost. Under these conditions, use extra cautionduring installation, not to cause a short circui...
3 Never mount the unit near the fuel tank. Secure the unit in place using four self-tapping screws(M5 x 12). SETTING THE ANTI-VIBRATION SPRINGS This unit can be installed horizontally (suspended), vertically, and at a 45° angle. Once the installation position has been decided, it'snecessary to set t...
