Page 2 - Congratulations
2 Thank you for purchasing the Audiovox Xpress XM ® Satellite Receiver. You are one step closer to experiencing the latest innovation in XM ® Satellite Radio. XM ® Satellite Radio will revolutionize your vehicle or in-home entertainment.XM ® features over 170 digital channels — The most commercial-f...
Page 3 - FCC Information
3 FCC Information NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits aredesigned to provide reasonable protection against harmful interference in aresidential installation. This equipment generates...
Page 4 - Table of Contents
4 Congratulations ................................................................................ 2 FCC Information ............................................................................... 3 Table of Contents .............................................................................. 4 Li...
Page 6 - List of Illustrations
6 Figure 1. Your Receiver 8-Character Alphanumeric ID .................................... 11Figure 2. Xpress Receiver Unit ....................................................................... 12Figure 3. Xpress Receiver Unit Display Screen .............................................. 15Figure ...
Page 8 - Xpress System Components; Remote Control Unit
8 Xpress System Components Remote Control Unit Part Number 136-4042 3 Vdc Battery for Remote, (1) CR2032 XM ® Receiver Model Xpress
Page 9 - When installed in a vehicle, the XM signal can be received and; Introduction; Audiovox 2; Audiovox FM Direct Adaptor:
9 The Audiovox Xpress XM® unit processes the XM satellite signalsreceived by the externally mounted antenna (purchased separately forHome or Boom Box Kits). The Xpress XM® unit recognizes and decodesthe incoming XM program information and provides an audio signal toyour radio or other audio output e...
Page 10 - Getting Started; XM Activation; Online Activation Process; he antenna must be installed on the outside of your vehicle for
10 Getting Started XM Activation Activating your XM® radio service is easy. You have one of two choicesto activate your service: Online or by Phone. Online Activation Process First, please make sure the Xpress XM® unit is working properly bytuning to the XM® Preview channel (#1). If you can hear XM®...
Page 11 - Once the ID code is obtained, log on to XM® at; Call-in Activation Process
11 Please check your 8-character alphanumeric XM® ID code carefully.There is no “I” (eye), “o” (oh), “S” or “F” used. You may wish to doublecheck your ID code on the outside of your tuner box.Enter the ID code below: Figure 1. Your Receiver 8-character alphanumeric ID Online Activation Process Once ...
Page 12 - The Audiovox Xpress XM® unit provides:
12 ROTARY / SELECT KNOB LCD DISPLAY POW ER / IR EYE BUT TON PRESET/DIRECT BUT TON MEMORY BUT TON DISPLAY BUT TON SEARCH BUT TON MENU BUT TON JUMP BUT TON PRESET KEYPAD (NUMBER) BUT TON Figure 2. Xpress Receiver Unit The Audiovox Xpress XM® unit provides: • 7 control buttons • 1 Rotary/Select Knob • ...
Page 13 - Controls; Receiver Control Features; This button allows the user to choose one of four (4); Rotary/Select Knob –; The Rotary/Select Knob is the primary control
13 Controls Receiver Control Features Display Button - This button allows the user to choose one of four (4) different formats to present the Artist, Song Title and data serviceinformation on the LCD screen. Search Button - This button allows the user to search the next channel category as well as b...
Page 14 - Jump Button –; This button allows the user to jump to the Previous
14 the various menus and lists. The current selection from the list will behighlighted on the display. When the item is highlighted, press theRotary/Select Knob to enter the selection. Power Button - This button applies power to and removes power from the Xpress XM® unit. This button is also the Xpr...
Page 15 - Display Screen Features; - Shown to the right is an example of an
15 Display Screen Features - Shown to the right is an example of an active Display Screen (see Figure 3). Pressing the DISPLAY button fromthe Default display switches between the artist name/song title screen,artist name/song title with stock screen, artist name/song title with sportsscreen, or larg...
Page 16 - Basic Operation; Turning Xpress ON and OFF; XM®
16 Basic Operation With the Xpress XM® unit properly installed, activated and connectedto your home/vehicle audio system or boom box, proceed as follows: Turning Xpress ON and OFF S e t u p y o u r A u d i o v o x X p r e s s X M ® u n i t u s i n g t h e i n s t a l l a t i o ninstructions included...
Page 17 - Menu Options
17 Figure 4. XM and Audiovox Logo Power ON Screen Figure 5. Active Channel Screen Menu Options To enter the Menu Options page, press the MENU Button on either theremote control or the main unit. The Main Menu list will appear on thescreen (see Figure 6). Using the Rotary/Select Knob, highlight theop...
Page 19 - FM ON or OFF Feature
19 FM Frequency The following Frequency Setting adjustments are possible only whenusing the Xpress XM® unit in your vehicle. NOTE: The Xpress XM® unit has an internal wireless FM transmitter, which allows you to play the audio through any standard vehicle FM receiver, eliminating the need for hardwi...
Page 21 - Brightness + Contrast; Upon entering either the brightness or
21 Brightness + Contrast This feature allows the user to adjust the brightness and contrast of theunit’s display (see Figure 9) . Upon entering either the brightness or contrast adjustment mode, a horizontal bar graph is displayed with aminus (-) sign on the left and a plus (+) on the right. Use the...
Page 22 - Figure 9. Brightness and Contrast Screen; When the Receiver is to be used in battery-operated; Backlight Timer
22 Figure 9. Brightness and Contrast Screen NOTE: When the Receiver is to be used in battery-operated accessories, such as the Xpress Boom Box (XMB10), to maximizebattery life, it is suggested that the brightness setting be reducedto a minimal level. Backlight Timer The Backlight Timer feature allow...
Page 23 - Figure 10. Backlight Timer Options; is
23 ROTATE DIAL TO CHANGE 30 Seconds 20 Seconds 10 Seconds Always On BACKLIGHT TIMER SET 20 Seconds Set Figure 10. Backlight Timer Options Figure 11. Selecting 20-Second Backlight Timeout If the desired backlight time is 20 seconds, turn the Rotary/Select knobCW to scroll down through the timer selec...
Page 24 - Audio Level; To prevent distortion caused by overdriving the audio playback; Figure 12. Audio Level Screen
24 As a result, the display backlight will turn off 20 seconds after thiss e l e c t i o n i s e n t e r e d , p r o v i d e d n o o t h e r b u t t o n i s p r e s s e d i n t h emeantime. Audio Level This feature allows the user to set the audio output signal level (seeFigure 12). Upon entering th...
Page 25 - W h e n t h e A n t e n n a A i m i n g s c r e e n i s s e l e c t e d , t h i s s c r e e n; Figure 13. Antenna Aiming Screen
25 Antenna Aiming (Home Installation) This feature allows the user to aim the antenna to optimize XM® signalreception (see Figure 13). Upon entering the antenna aiming mode, ahorizontal bar graph is displayed with a minus (-) sign on the left and aplus (+) on the right. The horizontal bar graphs rep...
Page 26 - Direct Tune; Figure 14. Direct Tuning Screen
26 Direct Tune Turn the Rotary/Select Knob CW or CCW to highlight choice (Direct TuneOn or Direct Tune Off). When the desired setting is highlighted, press theRotary/Select Knob or the (XM) Select Button on the remote control toconfirm (see Figure 14). The direct tune function when enabled (ON),allo...
Page 27 - Search Mode; Figure 15. Search Mode Screen
27 Search Mode This feature allows the user to change the way the search button on theXpress XM® unit functions. The Search button can be set to searchcategories, to scan through all presets (A, B, C) or all availablechannels. U p o n e n t e r i n g t h i s m o d e , t w o o p t i o n s a r e d i s...
Page 29 - Memory Recall; Figure 17. Memory Recall Screen
29 Memory Recall This feature allows the user to capture and store the current programdata information (Artist & Song title) with up to 20 listings (20 Artist/SongTitle combinations) (see Figure 17).Press and release the memory (mem) button to save the information ofthe current broadcast song or...
Page 30 - Figure 18. Tune Select Screen; Tune Select; Tune Select Erase All
30 Figure 18. Tune Select Screen Tune Select This feature allows the user to store current program information (Artistand Song title) for future comparison against the incoming XM® signal.The Xpress XM® unit can hold up to 20 entries, after which any newinformation saved will replace the oldest entr...
Page 33 - Figure 22. Select by Artist Confirmation Screen; Stock Ticker; Figure 23. Stock Ticker Screen
33 Figure 22. Select by Artist Confirmation Screen Stock Ticker This feature allows the user to monitor various stocks . The XpressXM® unit can monitor up to 20 stock symbols. Use the Rotary/SelectKnob or the remote control up down buttons to select “Add Stocks” or“Erase Stocks” (see Figure 23). Pre...
Page 34 - Add Stock; The Xpress XM® unit will sometimes complete the entry. When; Figure 24. Add Stock Screen
34 Add Stock Two screens will appear “Please Wait” and “Enter Symbol” (see Figure24). When the “Enter Symbol” screen appears use the Rotary/Select Knobor the remote control up down buttons to select each letter in the stocksymbol. Press the Rotary/Select Knob or the (XM) Select Button on theremote c...
Page 36 - Info Extras
36 Erase Some Stock This feature allows the user to erase Stock Tickers individually (seeFigure 27). Use the Rotary Select Knob or the Up and Down buttons ont h e R e m o t e C o n t r o l t o c o n f i r m t h e d e l e t i o n . T h e s t o c k w i l l b eimmediately removed. To exit this function...
Page 37 - Figure 28. Info Extra Screen
37 To select the various sports available use the Rotary/Select Knob or theUp and DOWN buttons on the remote control to highlight and choosethe desired sport. Press the Rotary/Select Knob or the (XM) Selectbutton on the remote control to confirm the selection and have the unitdisplay teams if availa...
Page 38 - Display Screen Mode; Figure 29. Display Screen
38 Display Screen Mode This feature allows the user to personalize the display of the unit toi n d i v i d u a l p r e f e r e n c e s . U p o n e n t e r i n g D i s p l a y S c r e e n m o d e(see Figure 29), the user can adjust the way information is viewed. Usethe Rotary/Select Knob or the remot...
Page 39 - Figure 30. Scrolling Display Screen
39 Scrolling Display The Scrolling Display feature allows the user to program the XpressXM® unit to scroll stock tickers or Info Extra information across thebottom portion of the screen (continuous stream of information). Thepaging mode feature presents the data one page at a time and is usefulwhen ...
Page 41 - Set Clock; Figure 32. Set Clock Screen Setting Time Zone
41 Set Clock This feature allows the user to personalize the clock display. The clockdata is provided via the XM® signal, and is displayed according to theusers settings. Use the Rotary/Select Knob or the UP and DOWNbuttons on the remote control and highlight one of the three options onthe Set Clock...
Page 47 - Set Factory Defaults
47 Figure 37. Auto-Off / Sleep Timer Screen Set Factory Defaults This feature allows the user to reset the Xpress XM® unit back to theoriginal factory settings. Upon entering the Factory Default mode, usethe Rotary/Select Knob or the UP and DOWN buttons on the remotecontrol to switch between the No ...
Page 49 - Exit Menu; Search Button
49 Exit Menu To exit the menu options rotate the Rotary/Select Knob CW or press thedown arrow on the remote control to highlight ‘Exit Menu’. Press theRotary/Select Knob or the (XM) Select button on the remote control toconfirm the selection. Search Button The Search button provides the ability to s...
Page 51 - Memory; Figure 41. Memory Selection Screens
51 Memory This feature allows the user to program into memory favorite song titles,artist names and channel information. To make an entry, press thememory (mem.) button and a “Saved in Memory” confirmation screenwill appear (see Figure 41). Up to 20 entries can be stored. When 20entries have been st...
Page 52 - Figure 42. Memory Selection Screens
52 To recall the saved information, press and hold the memory (mem.)button for three (3) seconds and the MEMORY RECALL screen will bedisplayed (see Figure 42). If there is more than one (1) entry in memory,use the Rotary/Select Knob or the remote control UP and DOWNbuttons to scroll through all stor...
Page 54 - Turning The Xpress Unit OFF; Figure 44. Exit Screen; Remote Control Features; Remote Control
54 Turning The Xpress Unit OFF To turn the Xpress XM® unit OFF, press the power button on the unit oron the remote control. The following screen will appear, the curved lineson either side of the XM® logo gradually disappear and the unit will shutdown. Figure 44. Exit Screen Remote Control Features ...
Page 55 - Figure 45. Xpress Receiver Remote Control; The MENU button is used to access “Main Menu”
55 Figure 45. Xpress Receiver Remote Control (+) Button (-) Button Menu Button (menu) – The MENU button is used to access “Main Menu” options which allows the user to make feature function adjustments andset personal preferences. Upon entering the main menu mode, use theUP and DOWN buttons to highli...
Page 58 - Care and Cleaning
58 Care and Cleaning • Keep the unit away from excessive moisture or where it may getwet. • It is strongly recommended that the unit be installed and keptaway from heat sources or direct sunlight. • When cleaning, use only a soft, dry cloth. • Never use any chemicals, abrasives, solvents, alcohol ba...
Page 59 - Troubleshooting
Page 60 - Specifications; Audio Output
60 Specifications Audio Output 3.5mm Diameter Min-Stereo Jack AUX (Audio) Input 3.5mm Diameter Min-Stereo Jack Power Supply: 5 Volt, 2 Amp Maximum, Negative Ground,DC Input. CAUTION: Use only the Audiovox approved adapter specified in the kit for theXpress XM® Satellite Radio Receiver, or theunit co...
Page 61 - 2 MONTH LIMITED WARRANTY
61 AUDIOVOX ELECTRONICS CORPORATION (the Company) warrantsto the original retail purchaser of this product that should this product orany part thereof, under normal use and conditions, be proven defective inmaterial or workmanship within 12 months from the date of originalpurchase, such defect(s) wi...
Page 63 - User Notes
Page 64 - 006 Audiovox Electronics Corporation
