Audiovox PRO 9842B - Manual
Audiovox PRO 9842B – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – the Purple
- Page 4 – negative hood/trunk trigger
- Page 8 – © 2003 Audiovox Electronics Corp.
1
Model PRO 9842B
Installation Manual
Vehicle Alarm System
With Auxiliary Output
Installation Instructions
This Unit Is Intended For Installation In Vehicles With
12 Volt Negative Ground Electrical Systems Only
Kit Contents:
(1) Control Module
(2) - Three Button Transmitters
3 Channel Code Learning Receiver
(1) - Multi Pin Input/Output Harness
(1) - Two Pin Door Lock Harness
(1) - Two Pin LED Indicator
(1) - Two Pin Valet / Programming Switch
Multi-tone Siren
(1) - Installation Manual
(1) - Operator's Manual
(1) - Limited Warranty
(2) - Window Decals
Released 11-9-01.
Changed 1-23-02.(note: No Rev was Required)
Corrected 2-15-02.(note: No Rev was Required)
Revision C: 3-5-03 Removed Channel # reference from title
Revised: REV. A 1-21-03 (Corrected page 8, Wiring Diagram)
Revised: REV. B 1-30-03 (Corrected Blue wire from Channel 3 to Channel 2)
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
3 3 HOOD AND TRUNK PIN SWITCHES:The pin switch included in this package is intended for protecting the hood or trunk/hatch areas of the vehicle. Inall cases, the switch must be mounted to a grounded metal surface. When the pin switch is activated, (hood/trunkopen), it will supply a ground to the inp...
4 cases the factory door pin-switches are wired in parallel, making it necessary to connect to only one door switchin order to detect the opening of all doors. In a few cases this will not be true, making it necessary to connect to thevehicle dome light, or isolated door trigger wires.Locate the veh...
