Audiovox PRO 9549FT3 - Manual

Audiovox PRO 9549FT3

Audiovox PRO 9549FT3 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
Page: / 8

Table of Contents:

  • Page 2 – INSTALLATION OF MAJOR COMPONENTS
  • Page 4 – Mini 11 Pin Edge Connector:; damage the control module.; active as long as the transmitter button is depressed.
  • Page 6 – Normal Door Lock Operation; Lock Relay; Yellow = Common Relay Contact
  • Page 7 – COMPLETING THE INSTALLATION
Loading the manual

SELECTABLE FEATURES

Note: The method of manual override can either be selected to operate from the valet switch or operate

as custom code. Be certain to place a check mark indicating the method used in the box located on
the last page of the owner's manual.

Note: When both Passive Arming and Voltage Sensing are selected, you must hardwire the driver’s door

pin switch in order to begin the passive arming sequence.

RF Programmable Features :

Feature Selection

1 Chirp

2 Chirps

3 Chirps

4 Chirps

Default

1st DoorL/UL

1 Sec.

3.5 Sec.

1 Sec L, Dbl. U/L

1 Sec.

2nd Accy Lock

Auto Lock On

Auto Lock Off

Auto Lock Off

3rd Accy. UL

Auto UL Dr

Auto UL All

Auto UL Off

Auto UL Off

4th Headlights

On Arm

On Disarm

On Both

Off

Both

5th Passive Locks

Passive

Active

Active

6th Passive/Active Arm

Passive Arm

Active Arm

Active Arm

7th Voltage Sense

Voltage Sense

Hardwire

Hardwire

8th Siren/Horn

Siren/Horn

Siren Only

Horn Only

Siren/Horn

9th Horn Chirp

10mS

16mS

30mS

16mS

10th Override Method

Custom Code

Valet

Valet

11th Chirp Delete From Tx

On

Off

Off

To program these selectable features;

Action

System Response

Turn ignition on

No response

Press and release the valet switch 3 times 1 Chirp - LED 1 flash
Within 3 seconds, turn ignition Off

Short chirp, then long chirp

First

Then On

1 chirp = 1 second door locks

Press transmitter Lock button to change

2 chirps = 3.5 second door locks

Press transmitter Lock button to change

3 chirps = 1 sec. lock, dbl 1 sec. unlock

or

Second

Press and release the valet switch

2 chirps = auto locks off

Press transmitter Lock button to change

1 chirp = auto locks on

or

Third

Press and release the valet switch

3 chirps = auto unlock off

Press transmitter Lock button to change

1 chirp = auto unlock drivers door only

Press transmitter Lock button to change

2 chirps = auto unlock all doors

or

Fourth

Press and release the valet switch

3 chirps = headlight output when arming and disarming

Press transmitter Lock button to change

4 chirps = headlight output off

Press transmitter Lock button to change

1 chirp = headlight output when arming

Press transmitter Lock button to change

2 chirps = headlight output when disarming

or

Fifth

Press and release the valet switch

2 chirps = active locks

Press transmitter Lock button to change

1 chirp = passive locks

or

Sixth

Press and release the valet switch

2 chirps = active arming

Press transmitter Lock button to change

1 chirp = passive arming

or

Model PRO 9549FT3

Installation Manual

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - INSTALLATION OF MAJOR COMPONENTS

Page 2 Seventh Press and release the valet switch 2 chirps = hardwire Press transmitter Lock button to change 1 chirp = voltage sense or Eighth Press and release the valet switch 1 chirp = siren and horn output Press transmitter Lock button to change 2 chirps = siren output only Press transmitter lo...

Page 4 - Mini 11 Pin Edge Connector:; damage the control module.; active as long as the transmitter button is depressed.

Page 4 Connect one of the dark blue wires to the output of the optional device you wish to control, and connect theother dark blue wire to either chassis ground, or to a fused + 12 VDC battery source, depending on the inputrequired to activate the device you are controlling.WARNING ! Never attempt t...

Page 6 - Normal Door Lock Operation; Lock Relay; Yellow = Common Relay Contact

Page 6 Normal Door Lock Operation 6 Pin Door Lock Output Connector:The orange, blue w/ white tracer, yellow, white, green, and blue wires in the 6 conductor connector are thecontacts of the on board door lock relays. The function of each of these wires is listed below; Lock Relay Unlock Relay Blue w...

Other Audiovox Models