Audiovox PRO 9246CH - Manual
Audiovox PRO 9246CH – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – NOTE: The keyless entry control module can be programed to either; A . Automatically lock the doors during step 2 above.; Protection While The System Is Armed
- Page 3 – VALET SWITCH; Enter the vehicle, and turn the ignition key to the on position.; MANUALLY OVERRIDING YOUR SYSTEM:; USING THE VALET SWITCH MANUAL OVERRIDE; Turn the ignition key to the on position.
- Page 4 – Programming Your Custom Override Code:; sequence. Turn the ignition switch to the on position.; Custom Code Programming Example:; Turn the ignition switch to the on position.
- Page 5 – USING THE CUSTOM CODE OVERRIDE; ) Enter the vehicle and turn the ignition switch to the on position.
- Page 6 – SELECTABLE FEATURE SETTINGS
- Page 7 – THIS PAGE LEFT BLANK INTENTIONALLY
128-6628
1 of 8
Model PRO 9246CH
Owner's Manual
Active/Passive Operation
Remote Keyless Entry
CONGRATULATIONS! Your purchase of this state-of-the-art security system expresses a
deep concern for the security of your vehicle, its contents, and passengers. To fully appreciate
the many functions and safeguards incorporated in this system, please spend a few minutes
reading this manual. You may find unexpected features that could mean the difference
between “protected” and “fully protected”
IMPORTANT ! In order to provide the highest possible level of security to your vehicle, this
system is equipped with selectable manual override circuitry. It is possible that you will need
to manually override your security system if the transmitter becomes lost, or inoperative due
to battery failure. Reading the sections on "MANUALLY OVERRIDING YOUR SYSTEM" is
necessary to fully understand the procedure required to enable your vehicle in such
situations. In addition, the chart on the last page of this manual has a section for the
particular features and options installed in your vehicle as well as the override method
selected.
Valet Switch manual override is pre-selected from the factory, however, the
system can be configured for "Custom Code" operation. Confirm the override mode selected
on the last page of this manual, and familiarize yourself with the section on it's operation.
FEATURES :
w
2 Three Button Programmable RF Transmitters (capable of accepting 4 transmitters)
w
Separate Lock/Unlock Transmitter Buttons
w
Four Channel Receiver
w
Code Hopping Technology
w
Selectable Manual Override Mode
w
User Programmable Manual Override Code
w
Active or Passive Arming Selectable
w
Programmable Auto Lock On / Off
w
Programmable Auto Unlock, Drivers, All, None
w
Programmable Door Lock Pulse Duration 1 Second / 3.5 Seconds / 1 Sec, Dbl. 1 Sec
w
Programmable Active or Passive Door Locks
w
RF Inhibit with ignition on
w
Interior Light Flasher (Arm/Disarm/Programming)
w
Remote Trunk Release (must have electronic trunk release)
w
LED Status Indicator Displays Arming, Armed, Disarmed & Valet
OPTIONS :
w
Parking Light Flasher (Relay Required) (Arm/Disarm/Programming)
w
Starter Disable (Relay Required)
w
Horn Output (Relay Required)
w
Multiple Vehicle Capable
w
Remote Vehicle Starter
w
Remote Power Window Roll Up
w
Remote Garage Door Interface
Note: The "Arming" and "Disarming" references in this manual apply only to those vehicles
which have the optional starter inhibit relay installed, and take place when the vehicle
is locked and unlocked respectively.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
128-6628 2 of 8 -2- NOTE: Because this system has an optional horn annunciation circuit, where light flash ismentioned, the horn may also beep a tone pattern synonymous with the flash pattern of thelights. Locking / Arming (Active) 1. Turn off the engine, exit the vehicle, and close all doors. 2. Pr...
128-6628 3 of 8 -3- NOTE: If the optional 2-step unlock feature was installed, then only the driver's door will unlock during step 1 above. To unlock all doors, press the unlock button of thetransmitter a second time. 3. Never attempt to disarm the system from a distance that prevents you from openi...
128-6628 4 of 8 Programming Your Custom Override Code: Unlike override switches easily found, and defeated, this security system allows theconsumer to program a personal override code, offering a higher level of security. To takeadvantage of this option, programmable feature # 6 must be selected for...
