Audiovox PRO 9232S - Manual
Audiovox PRO 9232S – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – PROTECTION WHILE THE SYSTEM IS ARMED:
- Page 3 – DISARMING THE SYSTEM:; INTRUSION WARNING SIGNALS:; been connected to zone 1.; OPERATING THE EMERGENCY PANIC:
- Page 4 – USING THE VALET SWITCH:; MANUAL OVERRIDE OPERATION:
- Page 5 – PROGRAMMING YOUR CUSTOM OVERRIDE CODE:
- Page 6 – CUSTOM CODE PROGRAMMING EXAMPLE:
- Page 7 – ADDITIONAL REMOTE FUNCTION:
- Page 8 – Your System Has These Features Activated:; SYSTEM FUNCTIONS AT A GLANCE; CHIRP INDICATORS
Congratulations on your purchase of the PRO 9232S automotive Keyless Entry
Upgrade Alarm System. The PRO 9232S is a state -of -the-art auto security system
that is designed to automatically arm and disarm when it receives a command from
your existing Factory Keyless Entry Transmitter. Taking a few moments to read this
manual will help to ensure that your vehicle is protected at all times.
ARMING THE SYSTEM: (ACTIVE)
1.
Turn the ignition key off, exit the vehicle, and close all doors.
2.
Press and release the Lock button on the keychain transmitter.
3.
The siren and or horn will beep one time, the parking lamps will flash one
time, and the red dash mounted LED will begin to slowly flash, indicating
that the system is ARMED.
NOTE: If the unit beeps three times when arming, then one of the entry
points ( hood, trunk, or doors ) has been left opened. Closing the
hood, trunk, or door will correct the problem, and the system will
emit a single chirp to confirm that the problem has been corrected.
Additionally, if illuminated entry is a feature of the Factory Keyless
Entry system, the alarm may chirp 3 times every time the system is
armed, and chirp one additional time when the interior light turns off
to confirm that all trigger zones are fully operational.
4.
Any time the door lock switch in the vehicle is used to lock the doors while
the ignition key is turned off, the system will immediately arm. To lock the
doors after entering the vehicle, make sure the ignition key is switched on
first. Turning the ignition key on first will stop the system from arming.
ARMING THE SYSTEM: (PASSIVE)
1.
Turn the ignition key off, exit the vehicle, and close all doors.
2.
The dash-mounted LED will begin to flash rapidly, indicating that the
system is automatically ( passively ) arming. As an added convenience,
the 30 second automatic passive arming will not begin until all doors are
closed, allowing passengers to exit the vehicle at their convenience.
Model PRO 9232S
OWNER’S MANUAL
KEYLESS ENTRY ALARM UPGRADE MODULE
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
3. In 30 seconds, you will hear a single short chip from the siren, and thevehicle’s parking lamps will flash one time, indicating that the system hasARMED. At this time, the red dash mounted LED will begin to flashslowly, providing a visual indication that the system is fully armed. 4. It is possib...
DISARMING THE SYSTEM: 1. As you approach the vehicle, press and release the unlock button on the keychain transmitter. 2. The siren and or horn will beep two times, the parking lamps will flash twotimes, and the red dash mounted LED will turn off, indicating that thesystem is DISARMED. If the option...
USING THE VALET SWITCH: The valet switch allows you to temporarily bypass all alarm functions, eliminat-ing the need to hand your transmitter to parking attendants or garage mechan-ics. When the system is in valet mode, all alarm functions are bypassed, how-ever the remote panic feature and remote d...
