Audiovox PRO 2032 - Manual
Audiovox PRO 2032 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – keychain transmitter.
- Page 3 – INTRUSION WARNING SIGNALS :; intrusion attempt was made through one of the vehicle’s doors.; OPERATING THE EMERGENCY PANIC:; release the unlock button on your keychain transmitter.; USING THE VALET SWITCH:; TO ENTER THE VALET MODE:
- Page 4 – override sequence. Turn the ignition switch to the on position.
- Page 5 – Custom Code Programming Example:; (The siren or horn will beep and the lights will flash one time.)
- Page 6 – new code tenths for step 2 above, and units for step 5 above.; ADDITIONAL REMOTE FUNCTION :; To operate the optional accessory
- Page 7 – SYSTEM FUNCTIONS AT A GLANCE; DASH LED INDICATORS
128-6132
1 OF 8
1
Congratulations on your purchase of the PRO 2032 automotive Keyless Entry
Upgrade Alarm System. This system is a state-of-the-art auto security system that
is designed to automatically arm and disarm when it receives a command from your
existing Factory Keyless Entry Transmitter. Taking a few moments to read this
manual will help to ensure that your vehicle is protected at all times.
NOTE: This unit has the capability to operate an optional siren, the vehicle horn, or
both. Where referenced (the siren will chirp) the siren may chirp, the horn
may beep or both may occur.
ARMING THE SYSTEM: ( ACTIVE )
1. Turn the ignition key off, exit the vehicle and close all doors.
2. Press and release the Lock button on the keychain transmitter.
3. The siren will chirp one time, the parking lamps will flash one time, and the red
dash mounted LED will begin to slowly flash, indicating that the system is
ARMED.
NOTE: If the unit beeps three times when arming, then one of the entry points
(hood, trunk, or doors) has been left opened. Closing the hood, trunk, or
door will correct the problem and the system will emit a single chirp to
confirm that the problem has been corrected. Additionally, if illuminated
entry is a feature of the Factory Keyless Entry system, the alarm may chirp
3 times every time the system is armed and chirp one additional time
when the interior light turns off to confirm that all trigger zones are fully
operational.
4. Any time the door lock switch in the vehicle is used to lock the doors while the
ignition key is turned off, the system will immediately arm. To lock the doors after
entering the vehicle, make sure the ignition key is switched on first. Turning the
ignition key on first will stop the system from arming.
ARMING THE SYSTEM: ( PASSIVE )
1. Turn the ignition key off, exit the vehicle, and close all doors.
2. The dash mounted LED will begin to flash rapidly, indicating that the system is
automatically ( passively ) arming. As an added convenience, the 30 second
automatic passive arming will not begin until all doors are closed, allowing
passengers to exit the vehicle at their convenience.
Model PRO 2032
OWNER’S MANUAL
KEYLESS ENTRY ALARM UPGRADE MODULE
Released 7-23-01.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
128-6132 2 OF 8 2 3. In 30 seconds, you will hear a single short chip from the siren and the vehicle’s parking lamps will flash one time, indicating that the system has ARMED. Atthis time, the red dash mounted LED will begin to flash slowly, providing a visualindication that the system is fully arme...
128-6132 3 OF 8 3 INTRUSION WARNING SIGNALS : The system will inform you if an intrusion attempt has occurred while you were awayfrom the vehicle. If an intrusion attempt has occurred, the siren and or horn will beepfour times when the system is disarmed. The vehicle’s parking lights will also flash...
128-6132 4 OF 8 4 MANUALLY OVERRIDING YOUR SYSTEM USING THE VALET SWITCH MANUAL OVERRIDE Your Security System can be disarmed without the use of the keychain transmit-ter. This is necessary, since you will need the ability to operate your vehicle if thetransmitter is lost or its battery fails. If yo...
