Audiovox PRO 2000 - Manual
Audiovox PRO 2000 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
128-6103
Front Page
Model PRO 2000
Short Manual
RF Programmable Features :
Feature Selection
1 Chirp
2 Chirps
3 Chirps
4 Chirps
5Chirps
Default
1st DoorL/UL
1 Sec.
3.5 Sec.
1 Sec L, Dbl. U/L
Dbl L, 1 Sec U/L
Dbl L, Dbl U/L
1 Sec.
2nd Accy Lock
Auto Lock On
Auto Lock Off
O f f
3rd Accy. UL
Auto UL Dr
Auto UL All
Auto UL Off
O f f
4th Passive Locks
Passive
Active
Active
5th Pass/Act Arm
Passive Arm
Active Arm
Active
6th Voltage Sense
On
O f f
O f f
7th Siren/Horn O/P
Siren&Horn
Siren Only
Horn Only
S&H
8th Horn Chirp
10ms
16ms
30ms
40ms
50ms
16ms
9th Override Method
Custom Code
Valet
Valet
10th Two Step Unlock
On
O f f
O f f
11th Chp. From Tx.
On
O f f
O f f
12th Keyless Or Alarm
Keyless
Alarm
Keyless
To program these selectable features;
Action
System Response
Turn ignition on
No response
Press and release the valet switch 3 times
1 Chirp - LED 1 flash
Within 3 seconds, turn ignition Off
Short chirp, then long chirp
First
Then On
1 chirp = 1 second door locks
Press transmitter Lock button to change
2 chirps = 3.5 second door locks
Press transmitter Lock button to change
3 chirps = 1 sec. lock, dbl 1 sec. unlock
Press transmitter Lock button to change
4 chirps = 1 sec. unlock, dbl 1 sec. lock
Press transmitter Lock button to change
5 chirps = dbl 1 sec. lock, dbl 1 sec. unlock
o r
Second
Press and release the valet switch
2 chirps = auto locks off
Press transmitter Lock button to change
1 chirp = auto locks on
o r
Third
Press and release the valet switch
3 chirps = auto unlock off
Press transmitter Lock button to change
1 chirp = auto unlock drivers door only
Press transmitter Lock button to change
2 chirps = auto unlock all doors
o r
Fourth
Press and release the valet switch
2 chirps = active door locks
Press transmitter Lock button to change
1 chirp = passive door locks
o r
F i f t h
Press and release the valet switch
2 chirps = active arming
Press transmitter Lock button to change
1 chirp = passive arming
o r
Sixth
Press and release the valet switch
2 chirps = voltage sense off
Press transmitter Lock button to change
1 chirp = voltage sense on
o r
Seventh
Press and release the valet switch
1 chirp = siren and horn output
Press transmitter Lock button to change
2 chirps = siren output only
Press transmitter lock button to change
3 chirps = horn output only
o r
Eight
Press and release the valet switch
2 chirps = horn chirp output 16mS
Press transmitter Lock button to change
3 chirps = horn chirp output 30mS
Press transmitter Lock button to change
4 chirp = horn chirp output 40 mS
Press transmitter Lock button to change
5 chirps = horn chirp output 50mS
Press transmitter Lock button to change
1 chirp = horn chirp output 10 mS
o r
Ninth
Press and release the valet switch
2 chirps = valet switch override operation
Press transmitter Lock button to change
1 chirp = custom code override operation
o r
Tenth
Press and release the valet switch
2 chirps = 2 step unlock off
Press transmitter Lock button to change
1 chirp = 2 step unlock on
o r
Eleventh
Press and release the valet switch
2 chirps = chirp delete from transmitter inactive
Press transmitter Lock button to change
1 chirp = chirp delete from transmitter active
o r
Twelfth
Press and release the valet switch
1 chirp = keyless entry mode
Press transmitter Lock button to change
2 chirp = alarm mode
o r
Press and release the valet switch
Exit program mode
o r
Turn ignition key off
Exit program mode
Note: Once you enter the feature programming mode, do not allow more than 15 seconds to pass between steps, or the programming will be
terminated.
Note: This system allows the transmitter to be programmed for single button lock/unlock or separate button lock/unlock. The receiver is set up as
follows:
Channel #1
= Lock/Unlock/Unlock 2 & Panic (Unlock only if no button is programmed to Ch.2)
Channel #2
= If Programmed, Unlock/Unlock 2 & Panic
Channel #3
= Channel 3 & Alternate Channel 3
Channel #4
= Channel 4 Output
Channel #5
= Channel 5 Output (If so Equipped)
Released 7-24-01.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
