Audiovox PAB-450R - Manual - manualsarea.com

Page 2 - INDEX

INDEX Specifications ................................................................................1 Precautions ................................................................................ 2 Installation Instructions .................................................................3 Wiring In...

Page 3 - Maximum Output Power:

HIGH PERFORMANCE STEREO AMPLIFIER This power amplifier has been designed to provide high quality performance witha minimum of maintenance. However, it's performance will only be as good as thecare and quality of components with which it is installed. We therefore advise thatyou read these instructio...

Page 4 - PRECAUTIONS; The last lead to be connected is the wire to the positive (+; completed and checked all other connections to the amplifier.; and chassis ground must

PRECAUTIONS -2- 1. Although this unit is designed with built-in self-protection circuits, there may be a possibility of damage if it is not wired correctly. Please follow the wiring instructions carefully for the type of system being used. 2. The last lead to be connected is the wire to the positive...

Page 5 - Select a mounting area where the amplifier will; CHECK BEFORE; Apply a self-adhesive rubber washer to the; MOUNTING SURFACE

INSTALLATION INSTRUCTIONS INSTALLATION DIAGRAM 1. Select a mounting area where the amplifier will have sufficient air circulation for proper cooling.I n a d e q u a t e a i r c i r c u l a t i o n w i l l c a u s e t h et e m p e r a t u r e of the amplifier to rise and willtrigger the thermal prote...

Page 6 - WIRING INSTRUCTIONS

-4- WIRING INSTRUCTIONS The wiring of your amplifier will depend on the system and speakers you are using but will either be a 4-channel, 3-channel,2-channel, or mixed-mono application. The following pages illustrate the input and output wiring for these types. Pleaserefer to the appropriate diagram...

Page 9 - -CHANNEL AND MIXED-MONO OUTPUT WIRING DIAGRAM

EXISTING SCREW OR BOLTCLEAN PAINT, RUST, DIRTOR GREASE FROM AREAFOR GOOD CONNECTION GROUNDED METALSECTION OF VEHICLE AUTO-ANTENNA LEAD -7- USE THIS OUTPUT WIRING WITH INPUT WIRING ON PAGE 6 4-CHANNEL AND MIXED-MONO OUTPUT WIRING DIAGRAM LEFT REAR SPEAKER m - m 12 VOLT VEHICLE BATTERY CHASSISGROUND U...

Page 11 - -CHANNEL OUTPUT WIRING DIAGRAM

EXISTING SCREW OR BOLTCLEAN PAINT, RUST, DIRTOR GREASE FROM AREAFOR GOOD CONNECTION GROUNDED METALSECTION OF VEHICLE AUTO-ANTENNA LEAD -9- USE THIS OUTPUT WIRING WITH INPUT WIRING ON PAGE 8 3-CHANNEL OUTPUT WIRING DIAGRAM MONO SPEAKER OR SUB-WOOFER 4-8 OHMS m - m 12 VOLT VEHICLE BATTERY CHASSISGROUN...

Page 12 - IMPORTANT

2-CHANNEL MONO (BRIDGED) INPUT WIRING DIAGRAM CAR STEREO LOW-LEVEL RCA OUTPUTS "Y" RCA TYPE SHIELDED CABLES (NOT SUPPLIED) IMPORTANT USE EITHER HIGH OR LOW-LEVEL INPUTS, NOT BOTH. HIGH-LEVEL (SPEAKER) OUTPUTS 4-PIN CONNECTORS -10- USE THIS INPUT WIRING WITH OUTPUT WIRING ON PAGE 11 WHITE w/B...

Page 14 - OPERATION; Power Indicator

-12- OPERATION After initial set-up, the amplifier should not require any further adjustment unless there is a change in the car stereoor speaker system with which it is used. 1 Power Indicator The Power LED functions as a power and warning indicator. The indicator is white when the power to theampl...

Page 16 - Printed in Korea; 2 / 24 MONTH LIMITED WARRANTY

© 2000 Audiovox Corp., Hauppauge, N.Y. Printed in Korea 128-5718 AUDIOVOX CORPORATION (the Company) warrants to the original retail purchaser of this product that should this product or any part thereof,under normal use and conditions, be proven defective in material or workmanship within 12 months ...

Audiovox PAB-450R - Manual

Table of Contents:

Summary

Other Audiovox Models