Audiovox MA200C - Manual

Audiovox MA200C

Audiovox MA200C – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
Page: / 12

Table of Contents:

  • Page 3 – metal screw through the hole in the relay mounting tab.; Secure the relay to an existing wire harness or other; component using cable ties. Refer to Figure 3.; FIGURE 2
  • Page 4 – FIGURE 3
  • Page 5 – FIGURE 5; Locate the wire coming from the starter switch that
  • Page 6 – by a pre-programmed transmitter; FIGURE 6
  • Page 8 – OPERATING THE SYSTEM; If the optional relay was installed to disable the
  • Page 9 – The alarm will sound, and continue to sound for 30
  • Page 10 – REPLACEMENT PARTS; Relay
Loading the manual

1

REMOTE CONTROL

MOTORCYCLE ALARM SYSTEM

INSTALLATION GUIDE

AND

OWNERS MANUAL

MODEL MA200C

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 3 - metal screw through the hole in the relay mounting tab.; Secure the relay to an existing wire harness or other; component using cable ties. Refer to Figure 3.; FIGURE 2

3 BLACK (LONG):Using the attached wire lug, connect the Black (long)wire of the siren to the negative terminal of the battery ora good ground source. BLACK (SHORT):Stretch the short Black antenna wire as long as pos-sible, avoiding metal contact if possible. This is the an-tenna wire for the alarm s...

Page 4 - FIGURE 3

4 CONNECTING THE RELAY (HORN FEATURE)IMPORTANT! The relay has been shipped with the BLACK wire loaded into terminal 87aof the Relay Socket. The wire mustbe removed from this location andplaced into the outer terminal of theRelay Harness 87. 1. Connect the ORANGE wire from the relay harness to the BR...

Page 5 - FIGURE 5; Locate the wire coming from the starter switch that

5 CONNECTING THE RELAY (STARTER/IGNITION)IMPORTANT ! When using the relay to disable thestarter, leave the BLACK wire in ter-minal 87a of the relay connector inthe location shown in the Figure 5. 1. Connect the ORANGE wire from the relay harness to the ORANGE wire from the siren harness. Besure to i...

Other Audiovox Models