Page 4 - FRONT PANEL FEATURE; Figure 1
FRONT PANEL FEATURE Figure 1 -3- 1. POWER 2. VOLUME Up and Down 3. TV/AV 4. SENSOR EYE 5. THREE POSITION DOME LIGHT SWITCH 6. SCREEN RELEASE 7. MENU 8. CHANNEL Up and Down 9. ENTER 10. DOME LIGHT
Page 5 - FRONT PANEL FEATURES –
-4- FRONT PANEL FEATURES – See Figure 1 1. Power Button – (Bright red when system is ON, dim when system is OFF). 2. Volume Up/Down – Controls volume to external Speakers if connected. Also, used to adjust the picture control setting when “contrast”, “bright”, “sharpness”, “color” or “tint” is displ...
Page 6 - ) Install Two “AAA” batteries as shown. Make sure
REMOTE CONTROL OPERATION -5- BATTERY INSTALLATION Before attempting to operate the Remote Control, install the batteries as described below. 1) Turn the Remote Control face down. Press down on the ridged area of the battery cover, and slide it off. 2) Install Two “AAA” batteries as shown. Make sure ...
Page 7 - REMOTE CONTROL OPERATION
-6- REMOTE CONTROL OPERATION 1. TV Controls: 1. TV POWER Press this button to turn on the set. Press the button again to turn the set off. 2. Direct Access (0-9,1--) Number Buttons Use these buttons to select a channel. The channel number chosen will be displayed on the screen for about four seconds...
Page 8 - TV AV1 AV2 AUX; MUTE Button
-7- 6. TV/VIDEO Button Press this button to access the AUDIO/VIDEO input jacks, on the front and rear of the TV. As the button is pressed, the on screen display will cycle as follows: TV AV1 AV2 AUX 7. MUTE Button Press this button to turn the TV sound off. Press again to restore sound to the previo...
Page 9 - Use this button to end the choice on the menu.; PICTURE SELECT Button; BRIGHTNESS CONTRAST COLOR SHARPNESS TINT
-8- 9. AUTO PROGRAM Button Select the regular channel broadcast TV or CABLE TV for AUTO PROGRAM. All the channel numbers for TV or CABLE TV will be scanned. The broadcasting signals will be detected and automatically stored. 10. ENTER Button Use this button to end the choice on the menu. 11. PICTURE...
Page 11 - ADJUSTI NG TH E PI CTURE
-10- ADJUSTI NG TH E PI CTURE When watching TV programs, the quality of the picture can be adjusted to suit your taste. 1. Press M ENU. The main menu appears. 2. Press SELECT VI DEO. The video source appears. Press this button to access the AUDIO/ VI DEO input jacks. MENU M A I N M E NUS E LEC T VI ...
Page 12 - Select CLOSED CAPTION and then press ENTER.
-11- 3. Select CLOSED CAPTION and then press ENTER. 4. Press either CHANNEL up or down to select the function. M ake sure the highlight bar is SET PI CTURE and then press ENTER. Closed captioning lets you display the audio p ortion of a program as text on the TV screen. This is useful to the hearing...
Page 13 - Press VOLUME; PIC TURE
6. Select the item to adjust. For example: To adjust brightness, press CHANNEL up or down buttons to select BRIGHTNESS and press ENTER. 6. Adjust the level: Press VOLUME -12- C H AN N E L 3 2 B R I G H TN ES S ENT E R PIC TURE CONTRAST SHARPNESSTI NTRESET – + BRI GH TNES S COLOR VO LU M E 5 0 B R I ...
Page 14 - To restore the factory settings
7. To adjust other items, repeat all above. Notes: The menu or display disappears from the screen if you do not press + or – within a few seconds. Whenever a menu or display disappears from the screen, the + and – buttons on the front of the TV become the volume adjustment buttons. If you want to ad...
Page 16 - CABLE TV TUNING PROCEDURE
CABLE TV (CATV) OPERATION In addition to normal broadcast reception of VHF and UHF channels, if you are a cable TV subscriber, your new TV is capable of receiving many unscrambled cable channels without the use of a converter box. When set to broadcast TV it receives channels 2~69. When set to one o...
Page 18 - PARENTAL CONTROL SETTINGS; Use the VOL Up buttons to enter into V-Chip Control Settings.
PARENTAL CONTROL SETTINGS This item helps parents set the standard for the programs their children are going to watch. 1. With the TV on, press the MENU button until special menu will appear. 2. Use the Channel up and down buttons to select the V-Chip Control item. 3. Use the VOL Up buttons to enter...
Page 19 - Press either CHANNEL up or down buttons to select the function.; Make sure the highlight bar is SET PASSWORD and then press ENTER.
SETTING THE V-CHIP An age limitation can be set to forbid children to see and hear violent scenes or pictures for adults, etc. The TV/VCR responds to “TV RATING” and “MOVIE RATING”. To use the V-CHIP function, you must register a password. 1. Press MENU. This main menu appears. 2. Press either CHANN...
Page 21 - Make sure the highlight bar is V-CHIP PROTECT and then press ENTER.; Press either VOLUME + or VOLUME – to select the desired setting.; TV CH ANN EL BLOCKI NG
2. Press either CHANNEL up or down buttons to select the function. Make sure the highlight bar is V-CHIP PROTECT and then press ENTER. 3. Enter the password (4 digits) using the Direct channel. Selection buttons (0-9). appears in stead of the number. Note: The initial password is 1111. 4. In the V-C...
Page 23 - M OVI E B LO CKI N G; MP PG : Parental guidance
7. MOVIE RATINGS CHART: M OVI E B LO CKI N G MP GMP P GMP P G- 13 MP RMP NC -17 MP XMP NR BLO CKBLO CKBLO CK BLO CKBLO CKBLO CKBLO CK S HO WS HO WS HO W S HO WS HO WS HO WS HO W MP G : ALL ages MP PG : Parental guidance MP PG-13 : Parental guidance, less than 13 years old MP R : Under 17 years old, ...
Page 24 - REMOTE INFRARED SENSOR/REPEATER; OPERATION; OVERHEAD DOME LIGHTS
-21- -23- REMOTE INFRARED SENSOR/REPEATER The LCM1502TV incorporates a Infrared Sensor which relays the signals from the Remote Control to allow the LCM1502TV to be controlled simply by pointing it’s Remote Control at the remote sensor. This provides control of auxiliary equipment such as an Flexvis...
Page 26 - OPTIONAL ACCESSORIES; WIRELESS HEADPHONES
-25- WIRED FM MODULATOR (P/N FMT100) Your video system may be equipped with an optional RF modulator, that allows you to listen to the LCM1502TV’s audio signal by tuning your vehicle’s radio to the selected frequency, (88.7 or 89.1- check with your installer) and tuning on the remote mounted RF modu...
Page 27 - TYPICAL SYSTEM CONNECTIONS
TYPICAL SYSTEM CONNECTIONS 49 MhzFM Transmi tt er -26-
Page 28 - White – Entry switch / Negative
Negative Dome Light Switching Positive Dome Light Switching White – Entry switch / Negative White – Entry Switch / Positive Black – Constant +12VDC Dome circuit Black – Chassis Ground Red – Chassis Ground Red – Constant +12VDC Dome Circuit -27- LINE AUDIO GROUND AUDIO GRO UND (SHIELD) POW ER GROUND ...
Page 29 - Troubleshooting; PROBLEM SOLUTION; Specifications
-28- Troubleshooting PROBLEM SOLUTION Poor TV Reception • Perform auto programming of the tuner • Verify antenna condition. • NOTE: Due to the nature of TV signals, vehicle motion, direction the vehicle is facing, distance from the transmitter, nearby surroundings and weather may adversely affect TV...
