Page 2 - SAFETY PRECAUTIONS; • TO PREVENT ELECTRIC SHOCK, MATCH; PLACEMENT INFORMATION
E - 1 SAFETY PRECAUTIONS The lightning flash with arrowhead symbol,within an equilateral triangle, is intended toalert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosurethat may be of sufficient magnitude to constitute arisk of electric shock to persons. The e...
Page 3 - IMPORTANT SAFETY INSTRUCTIONS
E - 2 IMPORTANT SAFETY INSTRUCTIONS 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with a dry cloth. 7) Do not block any ventilation openings. I n s t a l l i n a c c o r d a n c e w i t...
Page 4 - CONTENTS
E - 3 CONTENTS SAFETY PRECAUTIONS .................................................................................................................... 1 IMPORTANT SAFETY INSTRUCTIONS ........................................................................................... 2 CONTENTS .................
Page 5 - ACCESSORIES; Please check and identify the supplied accessories.; GETTING STARTED; USING THE REMOTE CONTROL
E - 4 ACCESSORIES Please check and identify the supplied accessories. Remote Control (with batteries) ................................................................................................. x 1 GETTING STARTED USING THE REMOTE CONTROL • Point the remote control at the remote sensor located...
Page 6 - CONTROL REFERENCE GUIDE; REMOTE CONTROL; Press to adjust the volume level.; button; Press to turn off the sound.; CH buttons; Press
E - 5 CONTROL REFERENCE GUIDE REMOTE CONTROL 1. STANDBY / ON button Press to turn ON the unit or put it inSTANDBY (OFF) mode. 2. TV button Press to switch to TV mode.AV buttonPress to switch to source connected toAV 1 / AV 2 (composite) inputs.HD buttonPress to switch to source connected toYUV (comp...
Page 7 - Turns the unit on and off.; CH; Adjusts the volume level.
E - 6 CONTROL REFERENCE GUIDE FRONT & SIDE VIEWS 1. STD.BY / ON button Turns the unit on and off. 2. MENU button Enters the on-screen TV menu. 3. FUNCTION button Selects TV / AV 1 / AV 2 / YUV in / HDMI 1 /HDMI 2 / PC in. 4. CH buttons Confirms selections on the TV menuscreen and changes the TV ...
Page 8 - REAR VIEW
E - 7 CONTROL REFERENCE GUIDE REAR VIEW 10. AUDIO IN (Left/Right) jacks (AV IN 2)11. VIDEO IN jack (AV IN 2)12. VIDEO IN jack (AV IN 1)13. Headphones jack14. TV ANTENNA terminal15. AUDIO IN (Left / Right) jacks (AV IN 1)16. S-VIDEO IN jack (AV IN 1)17. AUDIO IN (Left / Right) jacks (YUV IN) 18. VIDE...
Page 9 - CONNECTIONS; CONNECTING A TV ANTENNA / CABLE / SATELLITE
E - 8 CONNECTIONS CONNECTING A TV ANTENNA / CABLE / SATELLITE To view television channels correctly, a signal must be received from one of the following sources: - An indoor or outdoor aerial antenna- A cable system- A satellite system CONNECTING AN A/V DEVICE To connect to other equipment such as a...
Page 10 - CONNECTING DEVICES WITH A COMPOSITE (YELLOW RCA-TYPE) VIDEO OUTPUT; Connecting to a VCR / Video Game System / Camcorder; CONNECTING DEVICES WITH A COMPOSITE (YELLOW RCA-TYPE) VIDEO INPUT
E - 9 CONNECTIONS CONNECTING DEVICES WITH A COMPOSITE (YELLOW RCA-TYPE) VIDEO OUTPUT To connect A/V devices such as a VCR, video game system or camcorder: Connecting to a VCR / Video Game System / Camcorder Connect the AUDIO / VIDEO cable (not included) as shown: Make sure you connect the cable from...
Page 11 - CONNECTING A PC
E - 10 CONNECTIONS CONNECTING A HIGH-DEFINITION (HD) SOURCE High-Definition (HD) Devices with component video output must be connected to the YUV input.Connect the component video cable and audio cable (not included) as shown.Make sure you connect the component video cable and audio cable from the o...
Page 12 - CONNECTING HDMI; CONNECTING AN AUDIO AMPLIFIER
E - 11 CONNECTIONS CONNECTING HDMI To HDMIOUT jack HDMI (High Definition Multimedia Interface) supports both video and audio on a single digital connectionfor use with DVD players, DTV, set-top boxes and other digital AV devices. HDMI was developed toprovide the technologies of High Bandwidth Digita...
Page 13 - CONNECTING THE AC POWER CORD; H e a d p h o n e s
E - 12 CONNECTING THE AC POWER CORD • Connect the AC power cord into a wall outlet.• Press the STD. BY / ON button on the left side of the unit or use the remote control to turn on the unit. NOTES• T O P R E V E N T E L E C T R I C S H O C K , M AT C H W I D EBLADE OF PLUG TO WIDESLOT OF WALL OUTLET...
Page 14 - INSTALLATION; REMOVING THE BASE STAND; Six mounting
E - 13 INSTALLATION REMOVING THE BASE STAND WARNING: The LCD display is very fragile, and must be protected at all times when removing the basestand. Be sure that no hard or sharp objects, or anything that could scratch or damage the LCD display,come in contact with it. Do NOT place pressure on the ...
Page 15 - TV SETUP; VIDEO MENU
E - 14 TV SETUP VIDEO MENU 1. Press the MENU button.2. Press the ENTER or button to select Video.3. Use the or button to select the options (Picture Mode, Brightness, Contrast, Saturation, Tint, Sharpness or Color Temperature). Adjust them using the or button (The screen willchange to your desired s...
Page 16 - AUDIO MENU
E - 15 AUDIO MENU 1. Press the MENU button.2. Use the or button to select Audio, then press the ENTER or button to go into the Audio settings. 3. Use the or button to select the options (Balance, Bass, Treble, Virtual Surround, Reverb or Sound mode). Adjust them using the or button (The screen will ...
Page 17 - Channel Skip Setting:
E - 16 TV MENU (For TV Mode Only) 1. Press the MENU button.2. Use the or button to select TV. Press the ENTER or button to go into the TV settings. 3. Use the or button to select the options (Tuner Mode, Auto Scan, Auto Scan Add CH, Channel Skip, MTS or Audio Language). Adjust them using the or butt...
Page 18 - SETUP MENU; Time Zone; Date; Time Setup Setting
E - 17 SETUP MENU 1. Press the MENU button.2. Use the or button to select Setup. Press the ENTER or button to go into the Setup settings. 3. Use the or button to select the options (OSD Language, Time Setup, Caption or Restore setting). Adjust them using the or button (The screen will change to your...
Page 19 - Digital Caption Style; PARENTAL MENU; Password; If you forget the password,
E - 18 Restore Setting If you reset the TV to the factory settings, all your present settings on Video & Audio will be erased andreplaced by the factory’s default settings. However, picture settings in PC mode and Parental settingswill not be erased. Caption Setting Analog Closed Caption : Selec...
Page 20 - Parental Control Setting
E - 19 Rating Enable : Select On to edit the following parental items. Select Off to disable parental control.Open V-Chip : Reads the ratings from ATSC TV programs if there is rating information broadcasted, and denies the channel when its rating is higher than the ratings you pre-set. Parental Cont...
Page 21 - TROUBLESHOOTING GUIDE; SYMPTOM; T V
E - 20 TROUBLESHOOTING GUIDE SYMPTOM CAUSE (AND REMEDY) The remote does notfunction. • Check that the AC power cord is connected.• The unit is not turned on. No power. • Remove any obstacles between the remote and the unit.• Use the remote near the unit.• Point the remote at the remote sensor on the...
