Page 2 - Table of Contents; Care and Maintenance
Table of Contents Important Information...................................................................................................1 Important Safety Precautions ......................................................................................2 Preparations .................................
Page 3 - Important Information; CAUTION; FCC STATEMENT; FCC Notice
Important Information WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. The lightning flash with arrowhead symbol,within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's ...
Page 4 - Important Safety Precautions
Important Safety Precautions Electrical energy can perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety. But IMPROPER USE CAN RESULT IN POTENTIAL ELECTRI...
Page 5 - Lightning; ---Unplug this apparatus during lightning storms or when; Replacement parts; person uses; Entering of objects and liquids; safety; Wall or ceiling mounting
Important Safety Precautions (continued) 12. Stand ---Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. Do not place the product on an unstable trolley, stand, tripod or table. Placing the product on an unstable base can cause the pro...
Page 6 - EXAMPLE OF ANTENNA GROUNDING AS PER
23.Panel protection ---The LCD panel used in this product is made of glass. Therefore, it can break when the product is dropped or impacted upon by other objects. Be careful not to be injured by broken glass pieces in case the LCD panel breaks. 24.Pixel defect ---The LCD panel is a very high technol...
Page 7 - Preparations; Precaution on battery use; Using the Remote Control; Cautions regarding use of remote control; Batteries for the Remote Control; O p e n t h e b a t t e r y
Preparations Precaution on battery use Improper use of batteries can result in a leakage of chemicals and/or explosion. Be sure to follow the instructions below. < Place batteries with their terminals corresponding to the (+) and (–) indications. < Different types of batteries have different c...
Page 8 - Preparation; Antenna Connection; ANTENNAS
Preparation (continued) CABLE TV (CATV) CONNECTION A 75-ohm coaxial cable connector is built into the set for easy hookup. When connecting the 75- ohm coaxial cable to the set, screw the 75-ohm cable to the ANT. Terminal.Some cable TV companies offer “premium pay channels”. Since the signals of thes...
Page 9 - Identification of Controls; Main Unit; Functions of
Identification of Controls Main Unit Note: Functions of VOL+/- , CH+/- , SOURCE and POWER are also provided to the remote control. This operation manual provides a description based on operating functions with the remote control. 7 1. POWER 2. SOURCE To select the input signal source. 3. MENU Press ...
Page 10 - Allows you to connect cable or outdoor antenna.; Speaker output jacks
Identification of Controls (continued) Main Unit 1. D-Sub input /Audio Line in Connect to the D-Sub/audio output jacks on your PC. 2. Component inputs (Y, Pb/Cb, Pr/Cr, Audio L, R) Connect to the audio and component output jacks of a DVD player or Set-Top Box. 3. Antenna input Allows you to connect ...
Page 11 - Remote Control
Remote Control Identification of Controls (continued) 9 Turn the unit on or off To select Stereo mode Sound mute [0-9] number buttons:Direct channel To select input signal source To access the MENU main page or exit menu operation To display channel status or signal information Picture mode select A...
Page 12 - Connections; Connect a VCR; SOURCE; button repeatedly to select; To play VCR; Refer to the operating manual of the external device as well.
Connections Connect a VCR Connect the Audio/Video cables between the Audio (L/R)/Video jacks on the unit and VCR. Note: For better video, you can use the S-video jack if your source supports it.The unit automatically identifies S-Video if you are using S-Video jack. We recommend you to disconnect S-...
Page 13 - Connect a Camcorder; To playback Camcorder
Connections (continued) Connect a Camcorder Note: Connect the Audio/Video cables between the Audio (L/R)/Video jacks on the unit and camcorder. How to connect: 1. Turn on your LCD TV , press SOURCE button repeatedly to select Video . 2. Turn on your camcorder and set it to output mode. (For details,...
Page 14 - Connect a DVD player; button; repeatedly to select; To play DVD
Connect a DVD player Connections (continued) 12 Connect the Video cable between the Y, Pb, Pr input jacks on the unit and Y, Pb, Pr ( or Y, Cb, Cr) output jacks on the DVD player. Connect the Audio cable between the AUDIO input jack on the unit and AUDIO output jacks on the DVD player. 1. Turn on yo...
Page 15 - Connect a PC; To Watch the PC screen
Connect a PC Connections (continued) How to connect: 1. Turn on your LCD TV , press SOURCE button repeatedly to select D- Sub . 2. Turn on your PC and check for PC system requirements.3. Adjust the screen resolution and settings on your computer to the To Watch the PC screen Connect a D-Sub cable be...
Page 16 - Turning the Unit On and Off; Power; Viewing the MENUs and Displays; ENTER
Turning the Unit On and Off Turning the Unit On and Off Turning On Turning Off With the power on, press the Power button on the remote control to turn off. Note: You can also use the Power button on the control panel on the main unit. Viewing the MENUs and Displays Viewing the MENUS Your LCD TV has ...
Page 17 - Memorizing the Channels; Selecting the Signal Source
Memorizing the Channels Selecting the Signal Source Your LCD TV can memorize and store all the available channels for both antenna and cable channels. After the available channels are memorized, use CH+/- to scan the channels. Press MENU to display the menu main page. 1 Before your LCD TV can memori...
Page 18 - Manual Fine Tuning
Memorizing the Channels (continued) 16 Manual Fine Tuning Press VOL+/- to fine tune till the best possible picture and sound are obtained. Adding and Erasing Channels 2 3 Use number buttons to directly select a channel that will be added or erased. 1 4 Press ENTER o r VOL+/- to select On or Off. Whe...
Page 19 - Basic Operations; Changing Channels
Basic Operations Changing Channels Using the Channel Buttons (CH+ or CH-) Press the CH+ or CH- to change channels. When you press the CH+ or CH- , the unit changes channels in sequence. You will see all the channels that the unit has memorized.You will not see channels that were erased. Direct Acces...
Page 20 - Setting Picture; Customizing the Picture
Setting Picture Customizing the Picture Press MENU to display the menu main page. 1 The picture page will be displayed automatically. Press CH+ /- to select the item you wish to change. 3 Press VOL+/- to adjust the value of the item. 4 Press Menu to exit. 5 In TV/Video mode In D-Sub mode Option Func...
Page 21 - Adjusting Image in D-Sub mode; Adjusting the Image Position; Adjusting the Picture Automatically; Adjusting the Picture Automatically
Adjusting Image in D-Sub mode Press MENU to display the menu main page. 1 Press CH+ repeatedly to select Image page. /- 2 Press ENTER or VOL+/- to access the Image page. 3 The Auto Adjustment . item will be highlighted automatically 5 Image Position Image Auto Adjustment Move Move Select Select Sele...
Page 22 - Setting Sound; Customizing the Sound
Setting Sound 20 Customizing the Sound Using the Preset Sound Mode Use the S.M button to quickly select Sound mode. There are three preset Sound modes ( News , Movie and Music ) and one user-set Sound mode ( User ). Each preset mode has its own audio settings. Movie : Select for a movie program. Mus...
Page 23 - Other Functions; please be careful to use the; Factory Reset; Adjusting Menu Transparency; F i l l s c r e e n
Other Functions Adjusting Menu Transparency Loading Default Values Caution: please be careful to use the Factory Reset item. Once you confirm to use this function, all your settings will be reset and the unit loads default values. 21 Adjusting Back Light 1 3 2 Repeat steps 1~3 in [ Adjusting Menu Tr...
Page 24 - Viewing Closed Captions; Setting Closed Caption; If you set this item to; , the unit displays closed caption when you
Viewing Closed Captions Note: The unit decodes and displays the closed captions that are broadcast with certain TV shows. These captions are usually subtitles for the hearing impaired or foreign language translations. All VCRs record the closed caption signal from television programs, so home-record...
Page 25 - Parental Controls; Rating; NO ONE 17 AND UNDER ADMITTED.
Parental Controls Parental Controls 23 This function allows TV programs to be restricted and TV usage to be controlled based on FCC data. It prevents children from watching violent or sexual scenes that may be harmful.Restriction of TV programs includes two ratings that contain information about the...
Page 27 - Accessing the Parental Controls Menu; Turn On or Off Parental Lock Control Function; Clear Parental Control Settings; please be careful to use this function. Once you confirm to use
25 Parental Controls (continued) Accessing the Parental Controls Menu Press MENU to display the menu main page. 1 Press ENTER or VOL+/- to access the password checking page. 3 4 Press CH+/- to display Parental Controls page. 2 Input the correct password with 0-9 number buttons . The default password...
Page 28 - Adjusting the Movie Rating; Adjusting the TV Rating
Adjusting the Movie Rating Repeat steps 1~5 in [ Accessing the Parental Controls Menu ]. 1 Press CH+/- to select Movie Rating item. 4 Press ENTER or VOL+/- to confirm blocking and MENU to return. 5 Press ENTER or VOL+/- to display Movie Rating page. 3 Adjusting the TV Rating 1 Press CH+/- to select ...
Page 30 - Troubleshooting; Do not use in hot or cold rooms (locations)
Before calling for repair service, check the following items for possible remedies to the encountered symptoms. Symptoms Check item ! This may be caused by obstruction to the antenna due to high rise buildings or hills. Using a highly directional antenna may improve the picture. “Ghost” or double im...
Page 31 - LCD Display panel information; B. Do not display the fixed image for extended periods of time.; Cleaning and Maintenance
29 Care and Maintenance LCD Display panel information The marking or retained image on the LCD panel resulting from fixed image use is not an operating defect and as such is not covered by Warranty. This product is not designed to display fixed image patterns for extended periods of time. Note: Impo...
Page 32 - Specifications
Specifications 30 Power supply: AC 110-240V 50/60Hz Power Consumption: 130W Dimensions: 24 . 4 (W) x 6 . 73 (D) x 21 . 1(H) (inch) Weight: 25 . 6 lb Screen: 23” TV system & channel coverage: SYSTEM VHF UHF CATV NTSC-M 2-13 14-69 1-125 Color system: NTSC Speaker: 3W, 8 W x 2 Accessories: Operatin...
