Audiovox FPE1508 - Manual

E - 4 ACCESSORIES Please check and identify the supplied accessories. Remote Control (with batteries) ...................................................................................................... x 1 GETTING STARTED USING THE REMOTE CONTROL • Point the remote control at the remote sensor lo...

E - 5 CONTROL REFERENCE GUIDE REMOTE CONTROL 1. FUNCTION Button Press to switch between TV / AV In / YUV In / PC In. 2. Number (0 - 9) Buttons3. [dot] Button Press to enter digital sub-channels (i.e. 11.3 or 12.7) 4. EXIT Button Press to exit the TV SETUP menu and return directly to normal viewing. ...

E - 6 CONTROL REFERENCE GUIDE 1. STANDBY/ON Button Turns the unit on and off. MENU Button Enters and exits the TV menu. FUNCTION Button Selects TV, AV IN, YUV IN or PC IN. – VOL + Controls Adjusts the volume level and highlight selections (Left & Right) on the menu screen. / Buttons Selects a TV...

E - 7 CONNECTIONS CONNECTING A TV ANTENNA / CABLE / SATELLITE To view television channels correctly, a signal must be received from one of the following sources: - An indoor or outdoor aerial antenna - A cable system - A satellite system CONNECTING AN A/V DEVICE To connect to other equipment such as...

E - 9 CONNECTIONS CONNECTING A HIGH-DEFINITION (HD) SOURCE High-Definition (HD) Devices with component video output must be connected to the YUV input. Connect the component video cable and audio cable (not included) as shown. Make sure you connect the component video cable and audio cable from the ...

E - 10 To AC outlet USING HEADPHONES • Turn down the volume before connecting headphones to the unit, then adjust the volume to your desired level. • When headphones are connected, no sound will come from the front speakers. NOTE Avoid listening to sound at high levels for prolonged periods of time....

E - 11 INSTALLATION MOUNTING ON THE WALL This unit is VESA-compliant, and is designed to be wall-mounted with a VESA-compliant 3” x 3” (75mm x 75mm) mounting kit designed for flat-panel TVs (sold separately). Mount this unit according to the directions included with the mounting kit. NOTE Remove the...

E - 12 TV SETUP PICTURE MENU 1. Press the MENU button. 2. Press the button to enter PICTURE settings. 3. Use the or button to select the options ( Picture Mode, Contrast, Brightness, Sharpness, Tint or Color ). Adjust them using the or button (Screen will change to your desired setting). 4. Repeat s...

E - 13 TV SETUP TIME MENU 1. Press the MENU button. 2. Use the or button to select TIME, then press the button to enter the TIME settings. 3. Use the or button to select the options ( OSD Duration, Sleep Timer, Time Zone or Day Saving Time ). Adjust them using the or button. 4. Repeat step 3 to adju...

E - 14 TV SETUP PC Set Up (in PC mode only) - Resolution : 1,024 x 768 max - Refresh Frequency : 60Hz max H - Pos : Center the image by moving it left or right. V - Pos : Center the image by moving it up or down. Clock : Adjusts the display clock to change width of the image. Phase : Adjusts the ima...

E - 17 MAINTENANCE CLEANING THE UNIT • Be sure to turn the unit off and disconnect the AC power cord before cleaning the unit. • Wipe the unit with a dry soft cloth. If the surfaces are extremely dirty, wipe clean with a cloth that has been dipped in a weak soap-and-water solution and wrung out thor...