Audiovox AX-2K4 - Manual

Audiovox AX-2K4

Audiovox AX-2K4 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
Page: / 6

Table of Contents:

  • Page 2 – TO PROGRAM ADDITIONAL TRANSMITTERS:
  • Page 4 – REPRIORITIZING A TRANSMITTER’S PROGRAMMING:; Enter the transmitter program mode of the receiver channel to be
  • Page 5 – QUICK REFERENCE CHART:; CHANNEL; Flash; The light will turn off when the button is released.
Loading the manual

128-6987

1 of 6

1

2

1

3

3

4

5

BUTTON

RECEIVER

CHANNEL

SYSTEM FUNCTION

Lock And Arm Alarm, also initiate and
terminates *Panic

Unlock And Disarm, also initiates and
terminates *Panic. Programmable to
unlock drivers door and or all doors.

Lock and arm/unlock and disarm. May
be programmed to unlock driver's door
o r a l l d o o r s . A l s o w i l l i n i t i a t e a n d
terminate *Panic.

Pulsed or switched output to control
R e m o t e T r u n k R e l e a s e o r o p t i o n a l
device connected to channel 3.

When pressed and release two times,
will provide pulsed output or activate the
Remote Start option when installed.

When so equipped, this button can be
u s e d t o o p e r a t e a n o p t i o n a l d e v i c e
connected to channel 4.

When so equipped, this button can be
u s e d t o o p e r a t e a n o p t i o n a l d e v i c e
connected to channel 5.

These transmitters makes use of icons (symbols) to identify the reac-
tion your security system/keyless entry/and or remote start system,
where a p p l i c a b l e , w i l l h a v e w h e n a n y i c o n ( b u t t o n ) i s p r e s s e d .
These icons are programmed at time of installation to meet the needs of
the individual and to complement the vehicle that the system is installed
in. To replace a t r a n s m i t t e r or add transmitters, please follow the
programming instructions listed on the pages of this manual.

Transmitter Programming Guide

Model

AX-2K4 AX-2K4S,

AX-2K4MS, & AX-2K4MSFL

* Where So Equipped

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - TO PROGRAM ADDITIONAL TRANSMITTERS:

128-6987 2 of 6 2 Some of the more popular options available for the unused OptionButtons of your transmitter are: AS 9554 Remote Garage Door Interface AS 9075 Remote car starter AS 9153 Remote window roll up AS 9256 Remote trunk release relay Although the most common use of the transmitter buttons ...

Page 4 - REPRIORITIZING A TRANSMITTER’S PROGRAMMING:; Enter the transmitter program mode of the receiver channel to be

128-6987 4 of 6 4 button of the first transmitter you wish to remain stored into thecontrol unit until a single chirp is heard from the siren. (Repeat this for each transmitter you wish to remain stored in the controlunit).The receiver stores up to four transmitters. To be certain all transmitterslo...

Page 5 - QUICK REFERENCE CHART:; CHANNEL; Flash; The light will turn off when the button is released.

128-6987 5 of 6 BATTERY REPLACEMENT: The transmitter incorporates a small LED visible through the case whichis used to indicate battery condition. You will notice a decrease intransmitter range as the battery condition deteriorates. Transmit-ter battery replacement is recommended at least every 10 t...

Other Audiovox Models