Audiovox APS 400 - Manual
Audiovox APS 400 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 7 – and Green Wires; CONTROL MODULE; Cut to Eliminate Voltage
- Page 8 – Page
- Page 15 – MODULE DE COMMANDE; Coupé Pour Éliminer Tout
- Page 17 – Funciones programables de RF:; Manual de instalación; Para programar estas funciones seleccionables:
- Page 19 – CABLEADO DEL SISTEMA
- Page 23 – MÓDULO DE CONTROL; Cortar Para Eliminar
Page 1
SELECTABLE FEATURES
Note :
The method of manual override can either be selected to operate from the valet switch or operate as custom code. Be
certain to place a check mark indicating the method used in the box located on the last page of the owner's manual.
Wire Loop Selectable Features :
Wire Color
Closed Loop
Cut Loop
Gray Loop
Custom Code Manual Override
Valet Switch Manual Override
Green Loop
Voltage Sense
Hardwire
Note :
When both Passive Arming and Voltage Sensing are selected, you must hardwire the driver’s door pin switch in order
to begin the passive arming sequence.
RF Programmable Features :
Feature Selection
1 Chirp
2 Chirps
Default
First
1 Second Door Locks
3.5 Second Door Locks
1 Second
Second
Auto Lock On
Auto Lock Off
Auto Lock Off
Third
Auto Unlock On
Auto Unlock Off
Auto Unlock Off
Fourth
No Function
No Function
—————————-
Fifth
Passive Door Locks
Active Door Locks
Passive Locks
Sixth
Passive Arming
Active Arming
Active Arming
To program these selectable features;
Action
System Response
Turn ignition on
No response
Flip valet switch on then off 3 times
1 Chirp - LED 1 flash
Within 3 seconds, turn ignition Off
Short chirp, then long chirp
First
Then On
1 chirp = 1 second door locks
Press transmitter button 1 to change
2 chirps = 3.5 second door locks
o r
Second
Flip valet switch on then off
2 chirps = auto locks off
Press tranmitter button 1 to change
1 chirp = auto locks on
o r
Third
Flip valet switch on then off
2 chirps = auto unlock off
Press transmitter button 1 to change
1 chirp = auto unlock on
o r
Fourth
Flip valet switch on then off
1 chirp = No Function
Press transmitter button 1 to change
2 chirps = No Function
o r
Fifth
Flip valet switch on then off
1 chirp = passive locks
Press transmitter button 1 to change
2 chirps = active locks
o r
Sixth
Flip valet switch on then off
1 chirp = passive arming
Press transmitter button 1 to change
2 chirps = active arming
o r
Flip valet switch on then off
Exit program mode
o r
Turn ignition key off
Exit program mode
Note :
Once you enter the feature programming mode, do not allow more than 15 seconds to pass between steps, or the
programming will be terminated.
Model APS 400
Installation Manual
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
DOOR LOCK OUTPUTS ( + ) Lock Pulse( - ) Unlock Pulse ( - ) Lock Pulse( + ) Unlock Pulse GREEN RED RED LT. BLUE SHOCK SENSOR Red, Black, Blue, and Green Wires BLACK GREY APS 400 CONTROL MODULE GREEN WIRE LOOP Cut to Eliminate Voltage Sensing GRAY WIRE LOOP Cut for Valet Switch Override Operation Page...
Page 8 CHANNEL 2 Negative Pulsed Output for Optional Trunk Release Remote Starter Window Roll Up DK. BLUE APS 400 CONTROL MODULE + 1 2 VDC BATTERY Connect toa+1 2 Volt Battery Source ( See Note onVoltage Sensing ) CHANNEL 3 Negative Latching Output for Optional Remote Starter or Window Roll - U p GR...
ROUGE BLEU CLAIR CAPTEUR DE CHOCS Fils Rouge, Noir, Bleu, Et Vert. NOIR GRIS APS 400 MODULE DE COMMANDE BOUCLE DU FIL VERT Coupé Pour Éliminer Tout Captage De Tension Page 15 L.E.D. INTERRUPTEUR VALET VERT ROUGE SORTIE DE RELAIS DE DÉVERROUILLAGE ( + ) Impulsion De Verrouillage( - ) Impulsion De Dev...
