Audiovox APS-2K4MS - Manual
Audiovox APS-2K4MS – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – TO ENTER THE PROGRAM MODE:; Within 10 seconds, press and release the valet program switch one
- Page 3 – NOTE: Channels 6 and 7 can be used as a separate output to control a
- Page 6 – Cost Per Transmitter is:; (New York State Residents must include the appropriate sales tax); Mastercard; Make Checks Payable To Audiovox Corporation; ) Mail this form along with your payment to:; ORDER FORM FOR TRANSMITTER APS-2K4MS; To h e l p u s
Model APS-2K4MS
Programming Guide
T h e A P S - 8 0 0 / 8 7 5 M o d e l s h a v e a c o n f i g u r a b l e r e c e i v e r t h a t
allows the transmitter to be programmed to operate the Lock
Unlock functions with one transmitter button or with two transmitter
buttons (separate Lock/Unlock). In addition, the receiver also allows
driver priority function. This driver priority function takes place
when ever a particular transmitter is used to unlock the vehicle
regardless of the selection of one button or two button operation.
The following indicates the receiver programmable slots.
1
Lock/Unlock or Lock
2
Unlock if Programmed
3
Trunk Release & or Remote Start (Optional)
4
Auxiliary Output
5
Auxiliary Output
6
Driver 1 Priority or Separate Output
7
Driver 2 Priority or Separate Output
Receiver channels 6 or 7 will accept the programming of transmitter
channel 1 if used as the Lock/Unlock button, or Channel 2 when
separate Lock Unlock buttons are programmed. In this way, whenever
the transmitter is used to unlock the vehicle, channel 6 or 7, when
programmed, will provide a pulsed ground output. This output can be
connecter to the driver priority function of the vehicle to reset preset
user features. Please consult with your installation centers technician
to see if this feature is available in your vehicle.
Note: A total of 4 transmitters may be programmed into any receiver
channel.
Force programming a transmitter, removing a transmitter or reprioritizing
a transmitter is covered later in this manual.
Also, if you do not program a transmitter button into channel 2 which is
t h e s e p a r a t e u n l o c k / d i s a r m c h a n n e l , t h e n w h a t e v e r b u t t o n i s
programmed into channel 1 will serve as both lock/arm & unlock/disarm.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
TO ENTER THE PROGRAM MODE: 1. Turn the ignition switch to the “ON” position.2. Within 10 seconds, Press and release the valet/program switch three times. (Siren emits 1 short chirp indicating channel 1 has been entered)3. Within 10 Seconds, Press and hold the button of the first transmitter you wish...
(Repeat this for each transmitter you wish to operate the Channel 4output)10. Within 10 seconds, press and release the valet program switch one time. (Siren emits 5 short chirps indicating channel 5 has been entered)11. Within 10 Seconds, Press and hold any unused button(s) of the first transmitter ...
1) Pad Number: _____________________________________ 2) Name: __________________________________________ 3) Address: ________________________________________ 4) City: ________________ State: _____ Zip Code: ________ 5) Telephone Number: (_____) _______________6) Total Number Of Transmitters Required...
