Audiovox APS-20LAD - Manual

Audiovox APS-20LAD

Audiovox APS-20LAD – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
15 Page 15
16 Page 16
Page: / 16

Table of Contents:

  • Page 5 – connector on the alarm unit.; Wire Color
  • Page 6 – TRANSMITTER PROGRAMMING:; Engage/Disengage Panic Mode; PROGRAMMING FEATURES:
  • Page 7 – COMPLETING THE INSTALLATION:; with under the dash board or in the engine compartment areas.; FEATURE
  • Page 9 – conexión a tierra negativa de 12 voltios solamente; Manual de instalación
  • Page 13 – DETECTOR DE CHOQUE; de 4 clavijas en la unidad de alarma.
  • Page 15 – que lo pueda encontrar y consultar.
Loading the manual

Model APS-20LAD

Installation Manual

Vehicle Alarm System

With Channel 2 Auxiliary Output

Installation Instructions

This Unit Is Intended For Installation In Vehicles With

12 Volt Negative Ground Electrical Systems Only

Kit Contents:

APS-20LAD Control Module

(2) - Two Button Transmitters

2 Channel Code Learning Receiver

(1) - Multi Pin Input/Output Harness

(1) - Two Pin Door Lock Harness

(1) - Two Pin LED Indicator

(1) - Two Pin Valet / Programming Switch

Multi-tone Siren

(1) - 2 Stage Shock Sensor

(1) - Installation Manual

(1) - Operator's Manual

(1) - Limited Warranty

(2) - Window Decals

128-5560A

1 of 8

Released 9-24-99.
Revision A: Changed diagram 4-30-03.

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 5 - connector on the alarm unit.; Wire Color

5 128-5560A 5 of 8 providing a ground pulse during the disarming sequence.Connect the Red wire to the low current ground factory door "Lock" signal wire leading from the factory switch to thefactory door lock relay. Connect the Green wire to the low current ground factory door "Unlock...

Page 6 - TRANSMITTER PROGRAMMING:; Engage/Disengage Panic Mode; PROGRAMMING FEATURES:

6 128-5560A 6 of 8 connector, it will only plug in one way. Note: Please refer to the section; "Programming System Features" shownlater in this installation guide to learn the operation of the valet/program/manual override switch. POWER DOOR LOCK HARNESS2-PIN White Plug w/2 Wires; Red & ...

Page 7 - COMPLETING THE INSTALLATION:; with under the dash board or in the engine compartment areas.; FEATURE

7 128-5560A 7 of 8 to produce 2 Chirps. This signifies that you have changed the programming to Chirps OFF. Please follow theprogramming procedure carefully, and refer to the list of the Programmable Features above when programming theAPS-20LAD. COMPLETING THE INSTALLATION: After you have confirmed ...

Other Audiovox Models