Audiovox AA-929 - Manual
Audiovox AA-929 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – PROGRAMMING THE TRANSMITTERS:; If the vehicle battery is disconnected, or the alarm loses; OPERATING YOUR SYSTEM:; As you approach your vehicle, press button #1 of your keychain
- Page 5 – SHOCK SENSOR ADJUSTMENT:
- Page 7 – SIMPLE TWO STEP INSTALLATION; CONNECT POWER AND GROUND
- Page 8 – 2 MONTH LIMITED WARRANTY
- Page 10 – PROGRAMMATION DES ÉMETTEURS :; FONCTIONNEMENT DE VOTRE ANTIVOL :
- Page 11 – ESSAI DU CAPTEUR DE TENSION :
- Page 12 – RÉGLAGE DU CAPTEUR DE CHOCS :
- Page 14 – INSTALLATION SIMPLE EN DEUX ÉTAPES; MONTER LA SIRÈNE
- Page 15 – GARANTIE LIMITÉE À 12 MOIS
- Page 16 – MONTAJE DE LA SIRENA:; CONEXIÓN DE LOS CABLES DE LA SIRENA
- Page 17 – PROGRAMANDO EL TRANSMISOR:; OPERACIÓN DEL SISTEMA:
- Page 19 – AJUSTE DEL DETECTOR DE CHOQUE:
- Page 21 – INSTALACIÓN SIMPLE DE DOS PASOS; MONTAJE DE LA SIRENA
- Page 22 – GARANTIA LIMITADA DE 12 MESES; Corresponde a módulos de control, relés, transmisores y sensores.
- Page 23 – BLANK INSIDE BACK COVER
REMOTE CONTROL
TWO WIRE ALARM SECURITY SYSTEM
INSTALLATION GUIDE & OWNER’S MANUAL
GUIDE D’INSTALLATION ET MANUEL DE L’UTILISATEUR
DE L’ANTIVOL TÉLÉCOMMANDÉ À DEUX FILS
SISTEMA DE SEGURIDAD CON ALARMA BIFILAR A
CONTROL REMOTO
GUÍA DE INSTALACIÓN Y MANUAL DEL PROPIETARIO
Model AA-929
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
-2- age sensor. In such situations, the level of protection isminimized and reliant strictly on the vibration detector. Itmay be necessary to increase the sensitivity of the vibra-tion sensor. To do so see the section on adjusting theshock sensors for optimum results. WHITE LOOP: The White loop wire...
2. Strike the windshield support pillar with the palm of your hand, the unit will emit a few short chirps from the siren.This is the warn away (pre-detect) stage. 3. Striking the support pillar firmly will cause the siren to sound. This is the full trigger stage. 4. Repeat the above procedure from v...
SIMPLE TWO STEP INSTALLATION 1 2 CONNECT POWER AND GROUND MOUNT THE SIREN -6-