Audiovox 50-0312x SERIES - Manual
Audiovox 50-0312x SERIES – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – MATERIALS PROVIDED FOR INSTALLATION:; ITEM; VCP MOUNTING BRACKET
- Page 3 – I. PREPARATION OF VEHICLE INTERIOR; secure rear driver’s side seat track in place.; II. INSTALLATION OF HOUSING; FIGURE 1
- Page 4 – FIGURE 4
- Page 5 – Do not; Install rear seat in original manner. Check seat; FIGURE 8
INSTALLATION INSTRUCTIONS
FOR
50-0312x SERIES 1181338
DODGE CARAVAN VCP HOUSING
These instructions are intended for use only by experienced professionals in the automotive
customizing business. Special tools and equipment, as well as specialized handling and care
of product during installation, may be required. Before beginning this installation, carefully read
through the following instructions. Check for wiring or other componentry behind VCP area
before installing.
Materials/ Tools required for this installation:
1. #2 Phillips screwdriver
2. Powered screwdriver or drill with adapter
3. Awl or similar tool
4. Razor knife or similar
5. 1" Hole saw or equiv.
6. Audiovox VCP (AVP-7180 or equiv.)
Nov. 8, 1999
Printed in the U.S.A
INSTALLATION INSTRUCTION # 44-0048A
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 MATERIALS PROVIDED FOR INSTALLATION: ITEM Description QTY 1 SCREW, # 8 X 3/4" PPH 2 2 VCP MOUNTING BRACKET 1 3 VELCRO TAPE, 1" X 10" 1 4 VELCRO TAPE, 1" X 5" 1 5 VCP COVER 1 INSTALLATION INSTRUCTION # 44-0048A Nov. 8, 1999 Printed in the U.S.A.
3 I. PREPARATION OF VEHICLE INTERIOR 1. Remove and retain (3) three screws which secure rear driver’s side seat track in place. 2. Slide rear seat forward and remove and retain seat track. See Figure 1. 3. Mark wire location as shown in Figure1 and drill a 1" hole in plastic panel. Caution: Befo...
4 6. Align slot in VCP mounting bracket (item 2 pg 2) with existing hole in floor of vehicle. See Figure 4. 7. Install rear seat track in original manner. See Figure 5. 8. Remove and discard (2) two screws from the right side of VCP. See Figure 6. 9. Apply 10" Velcro tape (item 3 pg 2) to top re...
