Audiovox 50-0301x-014 SERIES - Manual
Audiovox 50-0301x-014 SERIES – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – MATERIALS PROVIDED FOR INSTALLATION:; ITEM; VCP MOUNTING BRACKET
- Page 3 – I. PREPARATION OF VEHICLE INTERIOR; Retract storage cover, remove from location; II. INSTALLATION OF HOUSING; FIGURE 1
- Page 4 – Check function of all components. See operating; Do not overtighten screws.; FIGURE 4
- Page 5 – Remove adhesive backing from Velcro tape along; FIGURE 8
INSTALLATION INSTRUCTIONS
FOR
50-0301x-002 SERIES 1181334
50-0301x-014 SERIES 1181332
50-0301x-019 SERIES 1181336
FORD EXPLORER / MERCURY MOUNTAINEER
VCP HOUSING
These instructions are intended for use only by experienced professionals in the automotive
customizing business. Special tools and equipment, as well as specialized handling and care
of product during installation, may be required. Before beginning this installation, carefully
read through the following instructions. Check for wiring or other componentry behind VCP
area before installing.
Materials/ Tools required for this installation:
1. #2 Phillips screwdriver
2. Powered screwdriver or drill with adapter
3. Awl or similar tool
4. Razor knife or similar
5. Audiovox VCP (AVP-7180 or equiv.)
Nov. 8, 1999
Printed in the U.S.A
INSTALLATION INSTRUCTION # 44-0040A
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 MATERIALS PROVIDED FOR INSTALLATION: ITEM Description QTY 1 SCREW, # 8X 9/16" PWH 10 1 2 SCREW, # 8 X 3/4" PPH 2 2 3 VCP MOUNTING BRACKET 1 4 VCP HOUSING 1 5 FOAM TAPE, 3/4" X 3/4" X 14" 2 INSTALLATION INSTRUCTION # 44-0040A Nov. 8, 1999 Printed in the U.S.A.
3 I. PREPARATION OF VEHICLE INTERIOR 1. Retract storage cover, remove from location and lay it in a safe place. See Figure 1. 2. Fold rear seat forward. 3. Install and route all video and audio cables, and any other added component requirements to their respective places in the vehicle. Refer to com...
4 5. Remove and discard (2) two screws from the left side of VCP. See Figure 4. 6. Insert VCP into mounting bracket (item 3 pg 2) as shown in Figure 5. Route wiring through opening in VCP bracket. Connect all wiring to VCP per instructions included with video system. 7. Check function of all compone...
