Audiovox 50-0286x-019 Series - Manual
Audiovox 50-0286x-019 Series – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – MATERIALS PROVIDED FOR INSTALLATION:; ITEM Description; VCP MOUNTING BRACKET; I. PREPARATION OF VEHICLE INTERIOR
- Page 3 – II. PREPARATION OF COMPONENTS FOR INSTALLATION; FIGURE 1
- Page 4 – NOTE: Make sure that tabs are inserted into; FIGURE 4
- Page 5 – FIGURE 8
- Page 6 – NOTE: If vehicle is not equipped with a CD player,
INSTALLATION INSTRUCTIONS
FOR
50-0286x-019 SERIES 1181278
CHEVROLET VENTURE VCP HOUSING
These instructions are intended for use only by experienced professionals in the automotive
customizing business. Special tools and equipment, as well as specialized handling and care
of product during installation, may be required. Before beginning this installation, carefully read
through the following instructions.
Use extreme care when cutting headliner material.
Check for wiring or other componentry above headliner material. Cut only where indicated.
Materials/ Tools required for this installation:
1. #2 Phillips screwdriver
2. Powered screwdriver or drill with adapter
3. 3/16" hex socket
4. 7mm hex socket
5. Awl or similar tool
6. Audiovox VCP (AVP-7180 or equiv.)
Mar. 11,1999
Printed in the U.S.A
INSTALLATION INSTRUCTION # 44-0035A
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 MATERIALS PROVIDED FOR INSTALLATION: ITEM Description QTY 1 SCREW, # 8 X 1 1/2" PWH 2 1 2 SCREW, # 8 X 3/4" PWH 2 2 3 SCREW, # 8 X 9/16" PWH 8 4 VCP MOUNTING BRACKET 1 3 5 BEZEL 1 6 DRIVER SIDE PANEL 1 7 PASSENGER SIDE PANEL 1 I. PREPARATION OF VEHICLE INTERIOR INSTALLATION INSTRUCTION...
3 1. Open door on O.E. center console. Using a 7mm socket, remove and discard (2) two screws which secure lower O.E. console. See Figure 1. 2. Slide console outward from original position and disconnect wiring from CD player. See Figure 2. 3. Remove and retain (2) two heater vents. See Fig. 2. 4. Re...
4 5. Depress tabs which secure CD player in console. Slide outward to remove CD player from console. See Figure 4. 6. Remove the (2) screws which secure bracket to the CD player. See Figure 5. 7. Tilt bracket downward and outward to remove bracket from CD player. 8. Remove and retain plastic parts f...
