Audiovox 50-0245x-002 SERIES - Manual
Audiovox 50-0245x-002 SERIES – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – MOUNTING BRACKET
- Page 3 – I. PREPARATION OF VEHICLE INTERIOR; cut is centered left to; II. PREPARATION OF CONSOLE; FIGURE 1
- Page 4 – III. INSTALLATION OF CONSOLE; Install and route all video and audio cables, and; Do not overtighten screws.; Make sure that wires do not get pinched between; FIGURE 3
INSTALLATION INSTRUCTIONS
FOR
50-0245x-002 SERIES 1181285
50-0245x-014 SERIES 1181286
FORD EXPLORER
OVERHEAD CONSOLE for use with FLIPDOWN VIDEO SYSTEM
These instructions are intended for use only by experienced professionals in the automotive
customizing business. Special tools and equipment, as well as specialized handling and care
of product during installation, may be required. Before beginning this installation, carefully read
through the following instructions.
Use extreme care when cutting headliner material.
Check for wiring or other componentry above headliner material. Cut only where indicated.
Materials/ Tools required for this installation:
1. #2 Phillips screwdriver
2. Powered screwdriver or drill with adapter
3. 3/32” drill bit
4. Razor knife or similar
5. Awl or similar tool
6. 18 GA wire 4' - 6'
7. Audiovox Series 640/650 Video Module
July 7, 1999
Printed in the U.S.A
INSTALLATION INSTRUCTION # 44-0026B
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 MATERIALS PROVIDED FOR INSTALLATION: ITEM Description QTY 1 SCREW, # 8 X 3/4" PWH 3 2 MOUNTING BRACKET 1 3 CONSOLE 1
3 I. PREPARATION OF VEHICLE INTERIOR 1. Carefully trim headliner as shown. Caution: Before cutting headliner material, check for wiring or other componentry above headliner. Cut only where indicated. Make sure that the 8 1/2" cut is centered left to right in vehicle. See Figure 1. 2. Remove and ...
4 III. INSTALLATION OF CONSOLE 5. Install and route all video and audio cables, and any other added component requirements to their respective places in the vehicle. Refer to component installation instructions for wiring diagrams. The suggested routing of the video system cable is as follows: Above...
