Audiovox 128-8852 - Manual

DFL710, DFL710PK

QuickStart

Guide

Congratulations on purchasing your new 7” Portable DVD player with FLO TV™.

Please follow these instructions to set up and start using the unit.

www.audiovox.com

Audiovox Electronics Corporation
150 Marcus Boulevard
Hauppauge, NY 11788
www.audiovox.com
© 2010 Audiovox Electronics Corp.

Visit

http://store.audiovox.com

to find

the best accessories for your products.

Trademark(s) ® Registered

Printed in China

3. You will need the following information readily available to proceed with activation:

• Credit/Debit

Card

• Email

Address

• Device

ID

• Authorization

Code

To find the Device ID and Authorization Code, simply change channels up or down. The non-subscribed channel
state will display your Device ID and Authorization Code.

4. Log on to

www.flotv.com

and select

Activate Service

. Follow the prompts and enter the required information.

Make sure your device is powered on, in FLO TV coverage and on a subscribed channel (depending on your
subscription). Your device should start playing the FLO TV service within 10 minutes.

Watching the

FLO TV

Service

1. Press

the

GUIDE

button to access the

FLO TV

Channel Guide.

2. Press

the and buttons to change channels. (Use these keys, and the and Buttons to navigate the Program

Guide and other features.)

3. Press

the

button to select a channel from the Program Guide.

4. Press

the

INFO

button to view program information for the current program.

5. Press

the

SETTINGS

button to access the Settings Menu, Parental Controls, Subscription Information, and System

and Legal information.

For more information, visit www.flotv.com

Playing CD/DVD

• Press

the

Power Switch

to the ON position to start the DVD player.

•

Press the DVD Cover Open Switch

on the top of the device to open the cover. Insert a CD/DVD disc. The disc

should start playback automatically. Press

to pause or resume playback. Press and hold for about two

seconds to stop playback.

• Press

the

INFO

button to display the main menu of the disc.

• Press

the

SETTINGS

button to enter the General Setup Page. Press and hold for about two seconds to enter the

System Setup Page. Press the navigation buttons , , or to navigate left and right, up and down, and
back. Press

to select an item on the screen.

IMPORTANT SAFETY NOTICE:

It is unlawful in most jurisdictions for a person to drive a motor vehicle which is equipped

with a television viewer or screen that is located in the motor vehicle at any point forward of the back of the driver’s seat, or
that is visible, directly or indirectly , to the driver while operating the vehicle. This product should ONLY be installed to the
rear of the back of the back of the driver’s seat where it will not be visible, directly or indirectly, to the operator of the motor
vehicle. In addition, the state of Rhode Island forbids the installation of such a device in a motor vehicle.

If your

FLO TV

service is not activated within 10 minutes, try powering off/on. If you still cannot view

the

FLOTV

service, call

FLO TV

Customer Care at 1-888-99-FLOTV (1-888-993-5688).

FLO TV

service is a 4:3 picture aspect ratio, and a normal picture will not fill the screen horizontally.

Unpacking the unit

•

1 x 7” portable DVD Player with FLO TV™

•

1 x Audio/Video Cable

•

1 x AC to DC Adapter

•

1 x DC Power Adapter

•

1 x Remote Control*

•

1 x Carrying Bag*

•

2 x Foldable Headphones*

* For DFL710PK only

•

1 x Instruction Manual

•

1 x Quick Start Guide

•

1 x Product Registration Card

•

1 x eMusic Card

•

1 x EULA

• 1 x

FLO

Terms of Service and Software License

• 1 x

FLO

Activation Insert

Powering and Installation

•

Powering the system indoors

Plug one end of the AC to DC adapter into the DC input jack on the left side of the main unit, then plug the other
end into the 100~240 V AC power receptacle.

•

Powering the system in a car

Plug one end of the DC Power adapter into the DC input jack on the unit, then plug the other end into the
vehicle power outlet.

Recharging the built-in battery

1. The DVD player utilizes a long-life Li-Polymer battery for portability. Li-Polymer batteries feature high storage

capacity and low level of degradation. This means the Li-Polymer batteries do not have “Memory Effect” and thus
can be recharged regardless of whether the battery is fully or only partially discharged. The battery must be
charged at least 8 hours prior to first use.

2. There are two methods to recharge the battery. Connect the AC to DC adapter to the unit, and then

A. power off the player. The Charge/Power LED will be red. Once fully charged, the Charge/Power LED will turn

off.

B. power on the player. The Charge/Power LED will be red during charge. Once fully charged, the Charge/Power

LED will be green.

Subscribing to the

FLO TV

Service

To subscribe to the

FLO TV

service, your device will need to be powered on and within a

FLO TV

coverage area.

FLO

TV

coverage maps can be found at www.fl otv.com/maps

1. Power on your device by pressing the

Power Switch

on the left side of the device.

2. Press

the

MODE

button to switch from the DVD player to the

FLO TV

service. The

FLO TV

Preview Channel will

appear shortly. If you do not see the

FLO TV

Preview Channel, you may not be in coverage. You must be within

the

FLO TV

coverage area to continue with the activation process.

v3.0 (1.0.3.0) (EN/E)

128-8852