Audio-Technica uhf wireless systems - Manual
Audio-Technica uhf wireless systems – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Professional UHF Wireless Systems; Installation and Operation; Introduction; Notice to individuals; with implanted cardiac pacemakers
- Page 3 – Receiver Installation; Location; Figure A
- Page 4 – Receiver Controls and Functions; Rear Panel Controls and Functions (Figure C); A. Select Frequency Manually; Figure c
- Page 5 – Transmitter Setup; Figure E
- Page 6 – System Operation; not
- Page 7 – Adjusting Input Level - Handheld Transmitter; Special Note: If accessing de-regulated frequencies between; Ten Tips to Obtain the Best Results
- Page 8 – Specifications
- Page 9 – Optional System Accessories
- Page 10 – Troubleshooting Guide
- Page 11 – Please note that Band UK antenna colour code is grey; Cannel
- Page 12 – Operation of this system in France is restricted to Band A only.
- Page 13 – ATW-1600 SERIES PROFESSIONAL UHF WIRELESS SYSTEM
- Page 14 – DECLARATION; OF; CONFORMITY; of the
- Page 15 – For future reference, please record your system information here:; Receiver
1600 Series Professional
UHF Wireless Systems
ATW-1661
UniPak
™
Transmitter System
ATW-1662
Handheld Dynamic Microphone System
ATW-1663
Handheld Condenser Microphone System
Installation and Operation
0700
C
M
J
CM
MJ
CJ
CMJ
N
1.pdf 26/11/08 17:01:03
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Professional UHF Wireless Systems Installation and Operation 2 CAUTION! Electrical shock can result from removal of the receiver cover. Refer servicing to qualified service personnel. No user-serviceable parts inside. Do not expose to rain or moisture.The circuits inside the receiver and transmitter...
Receiver Installation 3 Location For best operation the receiver should be at least 1 m above the ground and at least 1 m away from a wall or metal surface to minimise reflections. The transmitter should be at least 1 m from the receiver, as shown in Figure A. Keep antennas away from noise sources s...
4 B. Select Open Frequency Scan Function 1. From the normal operating mode, press and hold the set button until display flashes. 2. To select scan function, press and hold CH SELECT/SCAN button, continue to hold until available frequency is automatically displayed. 3. (a) To select frequency, press ...