Audio-Technica AT-PL50 - Manual
Audio-Technica AT-PL50 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Automatic Stereo Tur ntable System; Installation and Operation; Introduction
- Page 3 – Initial Setup; Setting the Pre-amp Switch; Figure 1 Inputs and pre-amp selector switch
- Page 4 – Operation; Automatic Operation; Figure 3
- Page 5 – Replacing the Stylus
- Page 6 – Troubleshooting; Turntable does not operate; Figure 10 Checking the drive belt
- Page 7 – Turntable operates, but no sound at all; Sound is very distorted; Specifications; with a; Troubleshooting, continued
Automatic Stereo
Tur ntable System
AT-PL50
Installation and Operation
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 Automatic Stereo Tur ntable System Installation and Operation To prevent electric shock, do not remove thecover. There are no user-serviceable partsinside. Internal adjustments are for qualifiedprofessionals only. Refer all servicing to qualified service personnel. Pour prévenir un choc électrique...
3 Initial Setup Setting the Pre-amp Switch For increased flexibility of use, this turntable has an internalstereo phono pre-amplifier. The Pre-amp Selector Switch is located under the turntable platter, in the rear-center (Fig. 1). If the system amplifier you are using has a PHONOinput, set the Pre-...
4 Operation Automatic Operation 1. Remove the stylus guard from the stylus assembly (Fig. 3). 2. Put a record on the turntable. If needed, use the 45 rpm adapter (Fig. 4). 3. Select the size of record: 12" or 7" (Fig. 5). 4. Select the speed: 33 1 / 3 rpm or 45 rpm (Fig. 6). 5. Start: Gently...
