Audio-Technica AT-LP2D-USB - Manual

Page 2 - Automatic Stereo Turntable System; Installation and Operation; Introduction; Stylus assembly; What’s in the box

2 Automatic Stereo Turntable System Installation and Operation To prevent electric shock, do not remove thecover. There are no user-serviceable partsinside. Internal adjustments are for qualifiedprofessionals only. Refer all servicing to qualified service personnel. Pour prévenir un choc électrique,...

Page 3 - Controls; Figure 1 Main Features

3 Controls Figure 1 Main Features Front Back PHONO LINE USB 1. START BUTTONEngages the motor/platter and begins automatic operation. 2. STOP BUTTONDisengages the motor/platter and returns tone arm to rest. 3. TONE ARM LIFT BUTTONLifts and lowers tone arm for manual selection. 4. PLATTER SPEED BUTTON...

Page 4 - Assembling the Turntable; gently; Connecting to Computers with USB Input; Figure 3

4 Assembling the Turntable The AT-LP2D-USB requires some assembly before first use.IMPORTANT: Do not connect the AC power cord untilassembly is complete. 1. Carefully place the turntable platter on the center spindle, making certain the platter is fully seated on the spindle. 2. While holding both e...

Page 5 - Operation; Automatic Operation; clockwise; Figure 4

5 Operation Automatic Operation 1. Remove the stylus guard from the stylus assembly (Fig. 4). 2. Put a record on the turntable. If needed, use the 45 RPM adapter (Fig. 5). 3. Select the size of record: 12" or 7" (Fig. 6). 4. Select the speed: 33 1 / 3 RPM or 45 RPM (Fig. 7). 5. Start: Gently...

Page 6 - Replacing the Stylus; first; do not interfere with

6 Replacing the Stylus While holding the head of the tone arm, rotate the front of thestylus assembly in a forward and down motion to remove it(Fig. 9). (As you remove the old assembly, note its position and“feel,” to aid in properly installing the new one.) Install the new stylus assembly as shown ...

Page 7 - Troubleshooting; Turntable does not operate; straight up; Turntable operates, but no sound at all; Make very certain the surface upon; Figure 11 Checking the drive belt

7 Troubleshooting Turntable does not operate 1. Make certain the turntable’s AC cord is plugged into anAC outlet, and that the AC outlet is “live.” 2. Check the drive belt to make certain it is on correctly.(See Figure 11.)A) Remove the record mat from the turntable platter(Fig. 11a). Place the mat ...

Page 8 - One -Year Limited Warranty; Specifications; Clean the stylus tip frequently, using a soft brush; with; only

Audio -Technica U.S., Inc., 1221 Commerce Drive, Stow, Ohio 442 24 330/ 686-2600 www.audio-technica.com P51983 ©2007 Audio -Technica U.S., Inc. Printed in China Visit our Web Site: www.audio-technica.com One -Year Limited Warranty Audio -Technica brand products purchased in the U.S.A. are warranted ...

Audio-Technica AT-LP2D-USB - Manual

Table of Contents:

Summary

Other Audio-Technica Models