Aube programmable thermostat - Manual

TH110-DP-P

1/6

TH110-DP-P

Owner’s Guide

Programmable Thermostat

This programmable thermostat can be connected to an electric heating sys-
tem such as an electric baseboard, a radiant ceiling, a floor heating system,
an electric convector, etc. It is not compatible with a central heating system.

*

Set the switch to Off to cut power to the heater. This will not affect the time and tem-
perature settings.

TURN OFF POWER TO THE HEATING SYSTEM AT THE MAIN POWER
PANEL TO AVOID ELECTRICAL SHOCK.

•

The installation must be carried out by an electrician.

•

All cables and connections must conform to the local electrical code.

•

Special CO/ALR solderless connectors must be used when connecting
with aluminum conductors.

•

Install the thermostat onto an electrical box.

•

Install the thermostat about 5 feet high, on an inside wall facing the
heater.

•

Avoid locations where there are air drafts (such as the top of a staircase
or an air outlet), dead air spots (such as behind a door), or direct sun-
light.

•

Do not install the thermostat on a wall that conceals chimney or stove
pipes.



Connect the thermostat wires to the

power line and to the load using sold-
erless connectors for copper wires.



Push the excess wire back into the

electrical box to prevent interference
with the thermostat.



Secure the thermostat using two 6-32

screws.



Return power to heating system.

NOTE:

Always keep the thermostat's vents

clean and unobstructed.

The configuration switches are on the back of the thermostat. Default (factory)
settings are inside the gray cells.

Upon power-up, the thermostat is in manual mode ( ) and displays the room
temperature.



Press the

Hour

and

Min

buttons to set the thermostat’s clock.



Press the

Day

button to set the day.

Setpoint

The thermostat normally displays the room temperature. To view the set tem-
perature, press the

or

button briefly. The set temperature will appear for

5 seconds.

To change the setpoint, press the

or

button until the desired temperature

is displayed. To scroll faster, hold the button.

Using a preset temperature

The thermostat has 3 preset temperatures:



Comfort temperature



Economy temperature



Vacation temperature

•

To use the Comfort or Economy temperature, press the

or button

respectively. The corresponding icon will be displayed.

•

To use the Vacation temperature, press both

and buttons simulta-

neously. The

icon will be displayed.

Storing a preset temperature

To store the Comfort or Economy temperature:

Set the desired temperature using the

or

button. Press and hold

the appropriate button (

or ) for approximately 3 seconds until the

corresponding icon is displayed.

To store the Vacation temperature:

Set the desired temperature using the

or

button. Press and hold

both

and buttons simultaneously for approximately 3 seconds until

the

icon is displayed.



Description

1 .



Connection

2 .

To select the
operating mode

To set the day

To set the time

Time and day

Temperature

Operating
mode icons

On/Off
switch

To skip a period

To program the schedule

Preset temperature
icons

Temperature
adjustment

Temperature
preset buttons

Heating
indicator

Periods

Appears during the
setpoint display

Power

Load

Load

Black

Red



Configuration

3 .

#

Configurations

UP

DN

SW1

Not used

SW2

Early Start

a

a.

Early Start can be used in Automatic mode only. When this function is
enabled, the thermostat calculates the optimal time to start heating in
order to obtain the desired temperature by the set time. The thermostat
re-assesses the start time daily based on the previous day’s perfor-
mance.

Disable

Enable

SW3

Time format

12-hour

24-hour

SW4

Temperature format

b

b.

If you change the temperature display format, the preset temperatures
(

, and

) will return to their default settings.

°F

°C



Power-up

4 .



Temperature Setting

5 .

Icon

Intended use

Default setting

Comfort (when at home)

70 °F (21 °C)

Economy (when asleep or away from home)

62 °F (16 °C)

Vacation (during prolonged absence)

50 °F (10 °C)