Page 2 - Congratulations; or call
The Bluetooth ® word mark and logos are owned by Bluetooth SIG, Inc. and any use of such marks by Advanced American Telephones and its parent, VTech Holdings Limited, is under license. VTech Holdings Limited is a member of Bluetooth SIG, Inc. Other trademarks and trade names are those of their respe...
Page 4 - Parts checklist; Your telephone package contains the following items.
Parts checklist Your telephone package contains the following items. Cordless handset Charger for cordless handset with power adapter installed Battery for cordless handset Battery compartment cover User’s manual User’s manual TL90070 DECT 6.0 expansion handset for use with AT&T models TL91270/T...
Page 5 - Table of contents; Getting started
User’s manual TL90070DECT 6.0 expansion handset for use with AT&T models TL91270/TL91370/TL92220/TL92270/TL92320/TL92370/TL92420/TL92470cordless telephone with BLUETOOTH ® wireless technology Table of contents Getting started Quick reference guide ............... 1Installation .....................
Page 6 - Quick reference guide
1 Getting started HOME/FLASH Press to make or answer a home call.During a home call, press to answer an incoming call when you hear a call waiting alertFlashes quickly when there is an incoming home call.Flashes slowly when a home call is on hold. Quick reference guide CHARGE light (blue ring around...
Page 8 - Using menus
3 Getting started EQ During an outside call, intercom call, message or announcement playback, press to change the quality of the audio to best suit your hearing. Using menus Press MENU/SELECT in idle mode (when the telephone is not in use) to enter the main menu. Use CID or DIR to scroll through men...
Page 9 - Main menu
4 Getting started Main menu The selected menu item is highlighted.For TL92220/TL92270/TL92320/TL92370/TL92420/TL92470: Quick reference guide For TL91270/TL91370: Feature menu Play messages Answering sysDirectoryCall logIntercomBluetoothRingersSettings Website Play messages Answering sysDirectory Cal...
Page 10 - For customer service or product information, visit our website at; Avoid placing the telephone base too close to:; Installation
5 Getting started Your product may be shipped with a protective sticker covering the handset or telephone base display - remove it before use. For customer service or product information, visit our website at www.telephones.att.com or call 1 (800) 222-3111 . In Canada, dial 1 (866) 288-4268 . Avoid ...
Page 11 - Charger installation
6 Getting started IMPORTANT INFORMATION: Use only the power adapter(s) provided with this product. To obtain a replacement, visit our website at www.telephones.att.com or call 1 (800) 222-3111 . In Canada, dial 1 (866) 288-4268 . The power adapters are intended to be correctly oriented in a vertical...
Page 12 - Battery installation and charging; Install the battery as shown below.; THIS SIDE UP; facing up as; light; light is on
7 Getting started Battery installation and charging Install the battery as shown below. Step 1 Plug the battery connector securely into the socket inside the handset battery compartment, matching the color-coded label. Insert the supplied battery with the label THIS SIDE UP facing up as indicated. S...
Page 14 - Battery charging; If the screen shows; Low battery; , you need to charged the
9 Getting started Battery charging Once you have installed the battery, the screen indicates the battery status (see table below). If necessary, place the handset in the telephone base or charger to charge the battery. For best performance, keep the handset in the telephone base or charger when not ...
Page 15 - Adding and registering handsets; and
10 Adding handset to your telephone base Adding and registering handsets Before using a new TL90070 handset, you must register it with the AT&T TL91270/TL91370/TL92220/TL92270/TL92320/TL92370/TL92420/TL92470 telephone system (purchased separately). The AT&T TL91270/TL91370/TL92220/TL92270/TL...
Page 16 - Expand your telephone system; Add and register a handset
11 Appendix Expand your telephone system Add and register a handset When first purchased, each expansion handset shows Press and hold HANDSET LOCATOR on base for 4 sec, then press # on handset after a battery is installed. Each handset should be charged without interruption for at least 30 minutes b...
Page 17 - Replace a handset
12 Appendix Replace a handset If you want to replace a handset or re-assign the designated handset number of a registered handset, you must deregister all the handsets and then individually register each handset. To make deregistration easier, read all of the instructions on this page before you beg...
Page 18 - Troubleshooting; My phone doesn’t work at all.
13 Appendix Troubleshooting If you have difficulty with your telephone, please try the suggestions below. For Customer Service, or to purchase accessories or replacement parts, visit our website at www. telephones.att.com , or call 1 (800) 222-3111 . In Canada, dial 1 (866) 288-4268 . Have the seria...
Page 19 - I cannot get a dial tone.; First try all the suggestions in; I cannot get a dial tone
14 Appendix Troubleshooting I cannot get a dial tone. First try all the suggestions above.Move the cordless handset closer to the telephone base. You might have moved out of range.If the previous suggestions don’t work, disconnect the telephone base from the telephone jack and connect to a different...
Page 20 - My cordless handset isn’t performing normally.; Follow the steps below to re-register the handset.; NOT REGISTERED; before you begin registration.; IN USE; light on the telephone base is on) and then; section on page 11
15 Appendix Troubleshooting My cordless handset isn’t performing normally. Make sure the power cord is securely plugged into the telephone base. Plug the power adapter into a different, working electrical outlet not controlled by a wall switch.Move the cordless handset closer to the telephone base. ...
Page 21 - • Ensure that the telephone base is powered up.
16 Appendix Troubleshooting Out of range OR No power at base appears on my cordless handset. • Ensure that the telephone base is powered up. • Place the cordless handset in the telephone base for one minute to allow the cordless handset and base to resynchronize channels. • Move the cordless handset...
Page 23 - to temporarily turn your microphone; again to turn the microphone on.; I hear other calls while using my phone.; Make sure that the ringer is not turned off. Refer to; Ringer volume; section in the manual provided with your
18 Appendix Troubleshooting I experience poor sound quality when using the speakerphone. For increased sound quality while using the speakerphone, place the handset on a flat surface with the dial pad facing up.When using a speakerphone, controlling background noise in your environment is essential....
Page 25 - My calls cut in and out while I’m using my cordless handset.; to turn the microphone on.
20 Appendix Troubleshooting My calls cut in and out while I’m using my cordless handset. Other electronic products can cause interference with your cordless phone. Try installing your phone as far away as possible from electronic devices such as wireless routers, or other cordless telephones.Do not ...
Page 26 - The charge light is off.
21 Appendix Troubleshooting The charge light is off. Make sure the power and line cords are plugged in correctly and securely.Unplug the electrical power. Wait for 15 seconds, then plug it back in. Allow up to one minute for the cordless handset and telephone base to reset.Clean the cordless handset...
Page 27 - Common cure for electronic equipment:
22 Appendix Troubleshooting I subscribe to a non-traditional telephone service that uses my computer to establish connections, and my telephone doesn’t work. Make sure your computer is powered on.Make sure your Internet connection is working properly.Make sure that the software is installed and runn...
Page 28 - Maintenance; Taking care of your telephone
23 Appendix Maintenance Taking care of your telephone Your cordless telephone contains sophisticated electronic parts, so it must be treated with care.Avoid rough treatment.Place the handset down gently.Save the original packing materials to protect your telephone if you ever need to ship it. Avoid ...
Page 29 - Important safety information
24 Appendix Important safety information This symbol is to alert you to important operating or servicing instructions that may appear in this user’s manual. Always follow basic safety precautions when using this product to reduce the risk of injury, fire, or electric shock. Safety information Read a...
Page 31 - SAVE THESE INSTRUCTIONS
26 Appendix Precautions for users of implanted cardiac pacemakers Cardiac pacemakers (applies only to digital cordless telephones): Wireless Technology Research, LLC (WTR), an independent research entity, led a multidisciplinary evaluation of the interference between portable wireless telephones and...
Page 32 - FCC Part 68 and ACTA
27 Appendix FCC Part 68 and ACTA This equipment complies with Part 68 of the FCC rules and with technical requirements adopted by the Administrative Council for Terminal Attachments (ACTA). The label on the back or bottom of this equipment contains, among other things, a product identifier in the fo...
Page 35 - Limited warranty
30 Appendix Limited warranty The AT&T brand is used under license - any repair, replacement or warranty service, and all questions about this product should be directed to: In the United States of America, call 1 (800) 222-3111 or visit www. telephones.att.com ; in Canada, call 1 (866) 288-4268 ...
Page 38 - Technical specifications
33 Appendix RF frequency band 1921.536MHz — 1928.448MHz Channels 5 Operating temperature 32°F — 122°F 0°C — 50°C Handset voltage 2.4 — 3.2 VDC Charger voltage (AC adapter output) 6VAC @300mA Replacement battery 2.4V 750mAH Operating time* Talk time (handset): up to eight hours Talk time (speakerphon...
Page 39 - Extended range and clarity
34 Appendix Technical specifications Extended range and clarity This telephone base comes with an antenna which gives much better clarity and covers a longer range than before.
