Page 2 - Congratulations; Important safety information; on
T Compatible with Hearing Aid T-Coil TIA-1083 Telephones identified with this logo have reduced noise and interference when used with most T-coil equipped hearing aids and cochlear implants. The TIA-1083 Compliant Logo is a trademark of the Telecommunications Industry Association. Used under license...
Page 3 - Parts checklist; Your telephone package contains the following items.
Parts checklist Your telephone package contains the following items. Cordless handset Charger for cordless handset with power adapter installed Battery for cordless handset Battery compartment cover User’s manual Belt clip for cordless handset User’s manual TL86009 DECT 6.0 expansion handset for use...
Page 4 - Table of contents; Getting started
User’s manual TL86009DECT 6.0 expansion handset for use with AT&T model TL86109corded/cordless telephone/ answering system with BLUETOOTH ® wireless technology Table of contents Getting started Installation ....................................... 1Quick reference guide ............... 2Charger i...
Page 5 - Avoid placing the telephone base too close to:; Installation
1 Your product may be shipped with a protective sticker covering the handset display - remove it before use. For customer service or product information, visit our website at www.telephones.att.com or call 1 (800) 222-3111 . In Canada, dial 1 (866) 288-4268 . Avoid placing the telephone base too clo...
Page 6 - Quick reference guide
2 Getting started Quick reference guide CHARGE light (blue ring around DIR/ /VOL/ /CID ) On when the handset is charging in the charger. DIR/ /VOL Press to scroll up while in menus.Press to increase the volume level during a call.Press to show directory entries when the telephone is not in use.While...
Page 9 - Charger installation; Install the charger as shown below.
5 Getting started IMPORTANT INFORMATION: Use only the power adapter provided with this product. To obtain a replacement, visit our website at www.telephones.att.com or call 1 (800) 222-3111 . In Canada, dial 1 (866) 288-4268 . The power adapter is intended to be correctly oriented in a vertical or f...
Page 10 - Battery installation and charging; Install the battery as shown below.; light is on when charging.; THIS SIDE UP; facing up
6 Getting started Battery installation and charging Install the battery as shown below. Step 3 Charge the handset by placing it face up in the charger. The CHARGE light is on when charging. Step 1 Plug the battery connector securely into the socket inside the handset battery compartment, matching th...
Page 12 - Battery charging; If the screen shows; Low battery; , you need to charge the battery
8 Getting started Battery charging Once you have installed the battery, the screen indicates the battery status (see table below). If necessary, place the handset in the charger to charge the battery. For best performance, keep the handset in the charger when not in use. The battery is fully charged...
Page 13 - Belt clip & optional headset
9 Getting started Belt clip & optional headset For handsfree telephone conversations, you can use any industry standard 2.5 mm headset (purchased separately). For best results, use an AT&T 2.5 mm headset. To purchase a headset, visit our website www.telephones.att.com or call 1 (800) 222-311...
Page 14 - Adding and registering handsets
10 Adding and registering handsets Before using a new TL86009 handset, you must register it with the AT&T TL86109 telephone system (purchased separately). The AT&T TL86109 telephone system can accommodate up to 12 handsets. The handset provided with the TL86109 comes registered as HANDSET . ...
Page 15 - Expand your telephone system; Add and register a handset
11 Adding handset to your telephone base Expand your telephone system Add and register a handset When first purchased, each expansion handset shows Press [HOLD] on base for 4 sec, then press [#] on handset after a battery is installed. Each handset should be charged without interruption for at least...
Page 16 - Replace a handset
12 Adding handset to your telephone base Replace a handset If you want to replace a handset or reassign the designated handset number of a registered handset, you must deregister all the handsets and then individually register each handset. To make deregistration easier, read all of the instructions...
Page 17 - Troubleshooting; My phone doesn’t work at all.
13 Appendix Troubleshooting If you have difficulty with your telephone, please try the suggestions below. For customer service, or to purchase accessories or replacement parts, visit our website at www.telephones.att.com , or call 1 (800) 222-3111 . In Canada, dial 1 (866) 288-4268 . My phone doesn’...
Page 18 - I cannot get a dial tone.; First try all the suggestions in; I cannot get a dial tone; above
14 Appendix Troubleshooting I cannot get a dial tone. First try all the suggestions above.Move the cordless handset closer to the telephone base. You might have moved out of range.If the previous suggestions do not work, disconnect the telephone base from the telephone jack and connect to a differen...
Page 19 - My cordless handset isn’t performing normally.; on the telephone base for about four; HANDSET X; Refer to; on page 11 for details.
15 Appendix Troubleshooting My cordless handset isn’t performing normally. Make sure the power cord is securely plugged into the telephone base. Plug the power adapter into a different working electrical outlet not controlled by a wall switch.Move the cordless handset closer to the telephone base. Y...
Page 20 - The batteries do not hold a charge.; in this
16 Appendix Troubleshooting Out of range OR no power at base appears on my cordless handset. Ensure that the telephone base is powered up.Move the cordless handset closer to the telephone base. You might have moved out of range.Reset the telephone base. Unplug the electrical power. Wait for 15 secon...
Page 22 - softkey to temporarily turn your; MUTE; softkey again to turn the microphone on.; I hear other calls while using my phone.; While on a call or playing messages, press the; button
18 Appendix Troubleshooting I experience poor sound quality when using the speakerphone. For increased sound quality while using the speakerphone, place the handset on a flat surface with the dial pad facing up.When using a speakerphone, controlling background noise in your environment is essential....
Page 23 - My cordless handset does not ring when I receive a call.; Make sure that the ringer is not turned off. Refer to; Ringer volume; on your user’s manual.
19 Appendix Troubleshooting My cordless handset does not ring when I receive a call. Make sure that the ringer is not turned off. Refer to Ringer volume on your user’s manual. Make sure the telephone line cord is plugged securely into the telephone base and the telephone jack. Make sure the power co...
Page 24 - My calls cut in and out while I’m using my cordless handset.; softkey to turn the microphone on.
20 Appendix Troubleshooting My calls cut in and out while I’m using my cordless handset. Other electronic products such as HAM radios and other DECT phones can cause interference with your cordless phone. Try installing your phone as far away as possible from these types of electronic devices. Do no...
Page 25 - The charge light is off.
21 Appendix Troubleshooting The charge light is off. Make sure the power and line cords are plugged in correctly and securely.Unplug the electrical power. Wait for 15 seconds, then plug it back in. Allow up to one minute for the cordless handset and telephone base to reset.Clean the cordless handset...
Page 26 - Common cure for electronic equipment:
22 Appendix Troubleshooting I subscribe to a nontraditional telephone service that uses my computer to establish connections, and my telephone does not work. Make sure your computer is powered on.Make sure your Internet connection is working properly.Make sure that the software is installed and runn...
Page 27 - Maintenance; Taking care of your telephone
23 Appendix Maintenance Taking care of your telephone Your cordless telephone contains sophisticated electronic parts, so it must be treated with care.Avoid rough treatment.Place the handset down gently.Save the original packing materials to protect your telephone if you ever need to ship it. Avoid ...
Page 30 - SAVE THESE INSTRUCTIONS
26 Appendix Precautions for users of implanted cardiac pacemakers Cardiac pacemakers (applies only to digital cordless telephones): Wireless Technology Research, LLC (WTR), an independent research entity, led a multidisciplinary evaluation of the interference between portable wireless telephones and...
Page 31 - FCC Part 68 and ACTA
27 Appendix FCC Part 68 and ACTA This equipment complies with Part 68 of the FCC rules and with technical requirements adopted by the Administrative Council for Terminal Attachments (ACTA). The label on the back or bottom of this equipment contains, among other things, a product identifier in the fo...
Page 34 - Limited warranty
30 Appendix Limited warranty The AT&T brand is used under license - any repair, replacement or warranty service, and all questions about this product should be directed to: In the United States of America, call 1 (800) 222-3111 or visit www.telephones.att.com ; in Canada, call 1 (866) 288-4268 ....
Page 37 - DECT 6.0 digital technology; Technical specifications
33 Appendix RF frequency band 1921.536MHz — 1928.448MHz Channels 5 Operating temperature 32°F — 122°F 0°C — 50°C Handset voltage 2.4 — 3.2 VDC Charger voltage (AC adapter output) 6VAC @300mA Replacement battery 2.4V 750mAH Operating times* Talk time (handset): up to seven hours Talk time (speakerpho...
Page 38 - Telephone operating range
34 Appendix Technical specifications Telephone operating range This cordless telephone operates within the maximum power allowed by the Federal Communications Commission (FCC). Even so, this handset and telephone base can communicate over only a certain distance — which can vary with the locations o...
