Artusi ABC1B - User Manual

6 EN DESCRIPTION QTY Burner box and external profile 1 Burners 2 for 60cm model3 for 80cm model 4 for 100cm model Flame diffusers 2 for 60cm model3 for 80cm model 4 for 100cm model Oil tray 1 Solid cooking plateonly for 80 and 100cm models. 1 Grill groups 2 for 60cm model3 for 80cm model 4 for 100cm...

7 EN Universal LPG regulator and hose 1 Natural gas regulator 1 CONFIGURATION 1 High cover for cooking 1 CONFIGURATION 2 Low cover 1

8 EN For your own safety, you should read this manual before operating the barbecue. Use Carefully read the user manual and keep it in a handy place for future reference.Below, we explain the meaning of the symbols used in this manual: ATTENTION This symbol indicates information relating to the user...

9 EN ATTENTION IF YOU SMELL GAS, do not try to light the barbecue. Perform the leak test procedure described in this manual. Locate the leak and tighten theleaking fitting; if it is the cylinder fitting, also replace the gasket seal.If the leak persists, turn off the gas supply and call for technica...

10 EN Do not modify this appliance. Do not place articles on or against this appliance. This appliance reaches high temperatures. Be especially careful when children and elderly persons are present Do not move the barbecue when it is on. Wear protective gloves when using the barbecue. Keep children ...

11 EN Tools needed for assembly: - Phillips screwdriver 1. Remove all components from the box. 2. Place the flame diffusers in the desired positions (under the points (A) in which the grill sections will be placed) and attach the rear edge of the flame diffuser to the rear of the body of the barbecu...

12 EN 3. Apply the oil drip pans to the front of the barbecue. BACK FRONT FRONT BACK

13 EN 4. Place the cooking plate and grill sections in the desired positions, making sure that the flame diffusers are under the grill sections. NOTE: Make sure that the grill groups are correctly oriented so that the surface of the grill is tilted forward to allow the oil to drain into the drip pan...

15 EN 2 - Lower the burner and replace the injector. BACK FRONT FRONT

17 I I. For connection to 9Kg portable gas cylinders please refer to page 28II. For connection to a fixed LPG Supply: It is possible to connect this barbecue to a fixed LPG reticulated piping system which may supply gas to other appliances in the building. The installation must be carried out by a l...

18 EN Universal LPG regulator and braided hose 1 50 45 490 AS/NZS 5601 (Gas Installations) Test point adaptor- Ensure arrow is pointing In the right direction Hose with tapered thread (thread tape required)

21 EN • When converted for the use of universal LPG, the appliance is designed to use different types of cylinders depending on the installation made. See the chapters on Installation Preparation and Connection of the cylinder. • The gas cylinder must be manufactured and marked in accordance with th...

22 EN ATTENTION • The appliance must only be used above ground level, in open air and natural ventilation without stagnant areas where leaking gas and combustion products are rapidly dispersed by the wind or natural convection. This barbecue is designed exclusively for outdoor use. Refer to the draw...

23 EN External surface area example 4 open side for at least 25% of the total area of the walls in total 30% or more of the remai-ning surface of the walls is open and free External surface area example 5 open side for at least 25% of the total area of the walls in total 30% or more of the remai-nin...

24 EN Island-mounted • If the appliance is installed in an island, it can be placed in the centre. Pay particular attention to the overall dimensions of the top of the island, taking into account the open cooking hood and its projection. See page 24. • The required dimensions of the cut-out are 1025...

26 EN 10 non-combustible material Wall 70 35 25 135 215 non-combustible Top air inlet minumum clearance to back wall non-combustible material non-combustible Wall 70 564 35 25 135 215 54 non-combustible Top Special opening for ventilation 25x700 mm minumum clearance to back wall woonden Wall 200 35 ...

31 EN ATTENTION The compartment below the barbecue unit must be isolated from the barbecue by a non-combustible panel. The compartment must comply with the requirements of AS/NZS 5601. If the barbecue is fuelled by LPG, ventilation openings must be made at the top and bottom of the compartment or ca...

33 EN The LPG cylinder may be connected inside the object-holder compartment of barbecue only if it has the dimensions shown in the guidelines. The safe use of a cylinder inside the object-holder compartment of the barbecue depends on several factors:A) The base of the cylinder must be properly inse...

34 EN Application of the low cover • Remove the thin cover from the packaging. • Attach the hinges to the outer frame and secure it with the special screw provided. Application of the thin cover LEFT RIGHT

35 EN Application of the high cover • Remove the High cover from the packaging.• Remove the hinge from the cover and apply it to the outer frame. Fix it with the special screws provided. • Insert the cover into the seats of the hinge. IMPORTANT • Given the dimensions of the cooking hood, we recommen...

36 EN Usage instructions IMPORTANT Make sure that the flame diffusers are positioned flame under the panels of the grills BBQ 100 Solid cooking plate on the left, double grill on the right - best orientation for grilling BBQ 100 half grill on the left, central solid cooking plate, hal grill on the r...

38 EN Control functions Before lighting the barbecue:• Check that all the gas hoses and fittings are tight. • Open the thin or high cover. Gas leakage detection test Never use a match or flame, use soapy water solution and spray or brush the solution onto all connections. Carefully check for bubbles...

39 EN Manual lighting • If the automatic ignition system is not working, the barbecue can be lit manually.• To turn it on manually, use a long match (28cm). Pass the lit match between the inspection slots under the front part of the hob, approaching it to the burner, then turn the knob and hold it p...

41 EN Care and cleaning of the appliance To preserve its appearance, we recommend cleaning the cooking surfaces after each use. Where the unit is exposed to the elements, we strongly recommend the optional cover. Other surfaces must be maintained regularly to protect the unit from tea staining and r...

42 EN 3 mm 3 mm Cleaning the grease drip pan The integrated barbecue has a unique oil management system that uses overlapping channels to convey all the oil towards the front to easily removable drip pans, which must be cleaned after each use.• To remove the drip pan, pull them upwards from the fron...

43 EN 2 - Move the drawer 3 - Raise up the pan up Burners The burners should be checked at least once a year and cleaned if necessary. Inspect the burners to make sure that no residue deposits and that the gas connections are free. SUGGESTIONS AND INFORMATION Special note on “tea staining” Sometimes...

44 EN Ignition system To change the battery, remove the battery cover by lifting the battery holder flap on the left side and pull out the battery. Replace it with a new D battery and replace the cover. Perform a test by pressing the knob; you should hear a click. Ventilation openings The ventilatio...

45 EN PROBLEM POSSIBLE CAUSE SOLUTION The barbecue doesn’t light No gas Check that the shut-off valve is open (ON) Gas cylinder empty - refill or change the cylinder The ignition system is not working Check the battery - you should hear a clicking sound when you press the knob Replace the battery Li...

Warranty Card Worldwide Appliances Pty Limited A.B.N. 45868077422Office:48-50 Moore Street, Leichhardt N.S.W 2040 Post:Locked Bag 3000, Annandale, N.S.W 2038 P: 1300 694 583WARRANTY REGISTRATION Your ongoing satisfaction with your artusi product is important to us. We ask that you complete the enclo...