Analog Devices UG-002 - Manual
Analog Devices UG-002 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – REVISION HISTORY
- Page 3 – SETTING UP THE POWER AND PC CONNECTIONS; Found New Hardware Wizard; SETTING UP THE SIGNAL CONNECTIONS
- Page 4 – INSTALLING THE SOFTWARE; My Computer; USING THE SOFTWARE; Evaluation Software Ready; Select Evaluation Board
- Page 5 – USING AN SPI PORT; REF A
- Page 6 – When a subsection window closes after clicking; OK; notice that the; button on the main window starts; LOAD; to
- Page 7 – Evaluation Board User Guide; MENU BAR OF MAIN WINDOW; File Menu; View Menu; Help Menu
- Page 8 – BUTTON BAR OF MAIN WINDOW; Load and Save
- Page 9 – DLL Window; Input PLL + DCXO Window; VCO Control Window
- Page 10 – Feedback Window; Output Loop Config: Box
- Page 11 – ROUTING 26 MHz TO TEST PORT
- Page 12 – SETTING THE 19.44 MHz MODE; ESD CAUTION
Evaluation Board User Guide
UG-002
One
Technology
Way
•
P.O.
Box
9106
•
Norwood,
MA
02062-9106,
U.S.A.
•
Tel:
781.329.4700
•
Fax:
781.461.3113
•
www.analog.com
Evaluating the AD9551 Multiservice Clock Generator
See the last page for an important warning and disclaimers.
Rev. 0 | Page 1 of 12
FEATURES
Simple power connection using USB connection and
on-board LDO voltage regulators
LDOs are easily bypassed for power measurements
AC-coupled differential LVPECL SMA connectors
SMA connectors for
2 reference inputs
2 PLL lock detect outputs
Microsoft Windows®–based evaluation software
with simple graphical user interface
On-board PLL loop filter
Easy access to digital I/O and diagnostic signals
via I/O header
Status LEDs for diagnostic signals
USB computer interface
Dip switch configurable for manual operation
Software calculator provides flexibility, allowing programming
almost any rational input/output frequency ratio
GENERAL DESCRIPTION
This user guide describes the hardware and software of the
AD9551 evaluation board and includes detailed schematics and
PCB layout artwork. The AD9551 Revision D evaluation board
is a compact, easy to use platform for evaluating all features of the
AD9551 multiservice clock generator.
The AD9551 accepts one or two reference input signals to
synthesize one or two output signals. The AD9551 uses a
fractional-N PLL that precisely translates the reference frequency
to the desired output frequency. The input receivers and output
drivers provide both single-ended and differential operation.
Reference conditioning and switchover circuitry internally
synchronizes the two references so that if one reference fails,
there is virtually no phase perturbation at the output.
The AD9551 uses an external crystal and an internal DCXO to
provide for holdover operation. If both references fail, the device
maintains a steady output signal. This may mislead you to believe
that the PLL is locked and the board is configured properly. A
simple test is to move the input REF A or REF B clock a few kilo-
hertz and verify that the changes in output frequency track the input.
DIGITAL PICTURE OF THE EVALUATION BOARD
08
12
9-
00
1
Figure 1.
AD9551 Evaluation Board, Revision D
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
UG-002 Evaluation Board User Guide Rev. 0 | Page 2 of 12 TABLE OF CONTENTS Features .............................................................................................. 1 General Description ......................................................................... 1 Digital Picture of ...
Evaluation Board User Guide UG-002 Rev. 0 | Page 3 of 12 EVALUATION BOARD HARDWARE The following instructions are for setting up the physical connections to the AD9551 evaluation board. SETTING UP THE POWER AND PC CONNECTIONS Set up the power and PC connections as follows: 1. Install the AD9551 eval...
UG-002 Evaluation Board User Guide Rev. 0 | Page 4 of 12 EVALUATION BOARD SOFTWARE The instructions included in this section are for setting up the AD9551 evaluation board software. INSTALLING THE SOFTWARE Do not connect the evaluation board until the software installation is complete. To install th...
