Page 3 - Regulatory Compliance
Regulatory Compliance The Bluetooth EZ-Extender is designed to be used solely in a laboratory environment. The board is not intended for use as a consumer end prod-uct or as a portion of a consumer end product. The board is an open system design, which does not include a shielded enclosure and there...
Page 5 - CONTENTS; PREFACE
Bluetooth EZ-Extender Manual v CONTENTS PREFACE Product Overview ............................................................................ x Purpose of This Manual .................................................................. xi Intended Audience ................................................
Page 6 - BLUETOOTH EZ-EXTENDER HARDWARE REFERENCE
CONTENTS vi Bluetooth EZ-Extender Manual UART Interface ............................................................................ 1-4 Bluetooth Module ........................................................................ 1-5 USB Interface ..........................................................
Page 7 - BLUETOOTH EZ-EXTENDER BILL OF MATERIALS
Bluetooth EZ-Extender Manual vii CONTENTS BLUETOOTH EZ-EXTENDER BILL OF MATERIALS BLUETOOTH EZ-EXTENDER SCHEMATIC Title Page .................................................................................... B-1 Module ..................................................................................
Page 10 - Product Overview
Product Overview x Bluetooth EZ-Extender Manual Product Overview The Bluetooth EZ-Extender is a separately sold daughter board that plugs onto an EZ-KIT Lite supporting the STAMP interface or an EZ-Board/EZ-Kit Lite supporting the expansion interface II connec-tor. The extender board isolates the lo...
Page 11 - Purpose of This Manual; Intended Audience; Manual Contents
Bluetooth EZ-Extender Manual xi Preface All of the power necessary to operate the extender is derived from the mat-ing EZ-KIT Lite/EZ-Board. Before using any of the interfaces, follow the setup procedure in “Bluetooth EZ-Extender Setup” on page 1-4 . Purpose of This Manual The Bluetooth EZ-Extender ...
Page 12 - What’s New in This Manual; Technical or Customer Support
What’s New in This Manual xii Bluetooth EZ-Extender Manual • Appendix A, “Bluetooth EZ-Extender Bill Of Materials” on page A-1 Provides a list of components used to manufacture the board. • Appendix B, “Bluetooth EZ-Extender Schematic” on page B-1 Provides the resources to allow board-level debuggin...
Page 13 - Supported Products
Bluetooth EZ-Extender Manual xiii Preface • Contact your Analog Devices, Inc. local sales office or authorized distributor • Send questions by mail to: Analog Devices, Inc. One Technology Way P.O. Box 9106 Norwood, MA 02062-9106 USA Supported Products The Bluetooth EZ-Extender is designed as an exte...
Page 14 - Analog Devices Web Site
Product Information xiv Bluetooth EZ-Extender Manual Analog Devices Web Site The Analog Devices Web site, www.analog.com , provides information about a broad range of products—analog integrated circuits, amplifiers, converters, and digital signal processors. To access a complete technical library fo...
Page 15 - Related Documents
Bluetooth EZ-Extender Manual xv Preface Data sheets, which can be downloaded from the Analog Devices Web site, change rapidly, and therefore are not included on the technical library CD. Technical manuals change periodically. Check the Web site for the latest manual revisions and associated document...
Page 16 - Notation Conventions
Notation Conventions xvi Bluetooth EZ-Extender Manual Notation Conventions Text conventions used in this manual are identified and described as fol-lows. Additional conventions, which apply only to specific chapters, may appear throughout this document. Example Description {this | that} Alternative ...
Page 17 - USING BLUETOOTH
Bluetooth EZ-Extender Manual 1-1 1 USING BLUETOOTH EZ-EXTENDER This chapter describes the Bluetooth EZ-Extender’s package contents, configuration, installation procedure, and interfaces. The information is presented in the following order. • “Package Contents” on page 1-2 Describes the product’s pac...
Page 18 - Package Contents
1-2 Bluetooth EZ-Extender Manual • “Expansion Interface” on page 1-6 Describes the board’s expansion interface. • “Example Programs” on page 1-6 Describes the example programs installed with the board’s software. For more information about the mating Blackfin processor, see documents referred to as ...
Page 20 - UART Interface
1-4 Bluetooth EZ-Extender Manual Figure 1-1 shows the default jumper and switch settings, connector loca- tions, and LED used in installation. Confirm that your board is in the default configuration before using the board. Bluetooth EZ-Extender Setup It is important to set up all components of the s...
Page 21 - Bluetooth Module
Bluetooth EZ-Extender Manual 1-5 Bluetooth Module The Bluegiga WT12 module is a next-generation, class 2, Bluetooth 2.0 plus EDR module. The WT12 is a highly integrated and sophisticated Bluetooth module, containing all of the necessary elements from Blue-tooth radio antenna to a fully implemented p...
Page 22 - Expansion Interface
1-6 Bluetooth EZ-Extender Manual Expansion Interface Expansion interface connectors on top of the Bluetooth EZ-Extender allow other EZ-Extenders to be mounted on top of the Bluetooth EZ-Extender. The UART interface is not brought up to the expansion interface because the interface is used by the WT1...
Page 23 - BLUETOOTH EZ-EXTENDER
Bluetooth EZ-Extender Manual 2-1 2 BLUETOOTH EZ-EXTENDER HARDWARE REFERENCE This chapter describes the hardware design of the Bluetooth EZ-Extender. The following topics are covered. • “System Architecture” on page 2-2 Describes the daughter board’s configuration and explains how the board component...
Page 24 - System Architecture
System Architecture 2-2 Bluetooth EZ-Extender Manual System Architecture A block diagram of the Bluetooth EZ-Extender is shown in Figure 2-1 . The block diagram illustrates how the UART, SPORT, and USB ports are interfaced the Bluetooth module and processor on a mating EZ-KIT Lite/EZ-Board. The bloc...
Page 25 - Configuration Switch
Bluetooth EZ-Extender Manual 2-3 Bluetooth EZ-Extender Hardware Reference The board contains a Bluegiga WT12 class 2, a Bluetooth 2.0, and EDR module, described in “Bluetooth Module” on page 1-5 . The EZ-Extender is equipped with an I 2 C serial flash memory chip for data storage and configuration. ...
Page 27 - Jumpers
Bluetooth EZ-Extender Manual 2-5 Bluetooth EZ-Extender Hardware Reference Jumpers This section describes functionality of the configuration jumpers. Figure 2-3 shows the jumper locations. Figure 2-3. Jumper Locations
Page 28 - TWI Flash Address Configuration Jumper (JP1)
Jumpers 2-6 Bluetooth EZ-Extender Manual TWI Flash Address Configuration Jumper (JP1) The TWI flash address configuration jumper ( JP1 ) controls the base address of the configuration flash memory. When multiple EZ-Extenders are stacked on top of each other, it may be necessary to change the JP1 set...
Page 29 - Power LED
Bluetooth EZ-Extender Manual 2-7 Bluetooth EZ-Extender Hardware Reference Power LED This section describes the power LED ( LED1 ). When LED1 is lit up, it indi- cates that the board is powered. Figure 2-4 shows the LED location. Figure 2-4. Power LED Location
Page 30 - Connectors
Connectors 2-8 Bluetooth EZ-Extender Manual Connectors This section describes connector functionality and provides information about mating connectors. The connector locations are shown in Figure 2-5 . Dashed lines indicate connectors on the bottom side of the board. Figure 2-5. Connector Locations
Page 35 - A BLUETOOTH EZ-EXTENDER
Bluetooth EZ-Extender Manual A-1 A BLUETOOTH EZ-EXTENDER BILL OF MATERIALS The bill of materials corresponds to “Bluetooth EZ-Extender Schematic” on page B-1 . Ref. Qty. Description Reference Designator Manufacturer Part Number 1 1 SN74LVC1G14DBVR SOT23-5 U4 DIGI-KEY 296-11607-1-ND 2 1 SN74LVC1G08 S...
Page 37 - DEVICES; BLUETOOTH EZ-EXTENDER; BLUETOOTH DAUGHTERBOARD; TITLE
D 4 3 2 1 A B C 20 Cotton Road Nashua, NH 03063 A B C D 4 3 2 1 PH: 1-800-ANALOGD C Title Size Board No. Date Sheet of DEVICES ANALOG Rev A0218-2008 BLUETOOTH EZ-EXTENDER 1.1 BLUETOOTH DAUGHTERBOARD 3-27-2009_11:41 1 4 TITLE
Page 38 - MODULE
V_SELECT 3.3V 3.3V V_SELECT WC GND VCC E0 E1 E2 SCL SDA V_SELECT V_SELECT VCCY Y A VCCA GND 3.3V VCCY Y8 Y7 Y6 Y5 A8 A7 A6 A5 Y1 Y2 Y3 Y4 A1 A2 A3 A4 VCCA EN GND 3.3V D+ D- GND VCC SHELL PIO4 PIO5 PIO6 TXD RTS RXD CTS D+ D- SCLK SPICS PCMO PCMI PCMC PCMS RESET MISO MOSI GND1 GND2 GND3 GND6 GND5 GND4...
Page 41 - INDEX
Bluetooth EZ-Extender Manual I-1 I INDEX A architecture, of this EZ-Extender, 2-2 B bill of materials, A-1 Bluetooth module, 1-5 , 2-2 Bluetooth module default config jumper (JP5), 2-6 board schematic (Bluetooth EZ-Extender), B-1 C configuration, of this EZ-Extender, 1-4 configuration switch (SW1), ...
