Amtrol SPT-28 - Manual
Amtrol SPT-28 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – TYPICAL INSTALLATION; EXPLOSION OR RUPTURE HAZARD; INSTALLATION AND OPERATION INSTRUCTIONS; IMPORTANT GENERAL SAFETY INFORMATION
- Page 3 – SIZING THE
- Page 4 – AMTROL INC. LIMITED PRODUCT WARRANTY
THIS IS THE SAFETY ALERT SYMBOL. IT IS USED TO ALERT YOU TO POTENTIAL PERSONAL INJURY AND
OTHER HAZARDS. OBEY ALL SAFETY MESSAGES THAT FOLLOW THIS SYMBOL TO REDUCE THE RISK OF
PERSONAL INJURY AS WELL AS PROPERTY DAMAGE.
READ CAREFULLY THE PRODUCT INSTALLATION, OPERATING AND MAINTENANCE MANUAL. FAILURE
TO FOLLOW THE INSTRUCTIONS AND WARNINGS IN THE MANUAL MAY RESULT IN SERIOUS OR FATAL
INJURY AND/OR PROPERTY DAMAGE, AND WILL VOID THE PRODUCT WARRANTY. THIS PRODUCT MUST BE INSTALLED
BY A QUALIFIED PROFESSIONAL. FOLLOW ALL APPLICABLE LOCAL AND STATE CODES AND REGULATIONS, IN THE
ABSENCE OF SUCH CODES, FOLLOW THE CURRENT EDITIONS OF THE NATIONAL PLUMBING CODE AND NATIONAL
ELECTRIC CODE, AS APPLICABLE.
West Warwick, Rhode Island 02893
INSTALLATION & OPERATION
INSTRUCTIONS
SURGE-TROL
™
Surge Arrestor SPT-7 thru SPT-70
MARK OF THE ORIGINATOR
* All SURGE-TROL
™
Series models come with a 1 year warranty. See back page for warranty information.
PN: 9017-140 (05/10)
SURGE-TROL
™
SPT-7
SPT-11
SPT-14
SPT-18
SPT-21
SPT-28
SPT-35
SPT-42
SPT-50
SPT-56
SPT-70
For Models:
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Pre-Installation 1. Visually inspect the Surge-Trol for any damage. If damage exists return product for replacement. 2. Remove air cap.3. For applications with pump start-up creating water hammer adjust the factory pre-charge setting to 15% below static pressure. 4. For applications with surge issue...
Description Standard Construction Shell Steel Bladder Heavy Duty Butyl NSF/ANSI 61 Bladder Thickness .100 Minimum System Connection Steel - ANSI Flange Coating Red Oxide Primer Factory Precharge 25 PSIG (1.7 bar) Use: SG = Specific gravity of fluid: Water 1 Ethylene glycol 1.1 Propylene glycol 1.1 G...
AMTROL INC. LIMITED PRODUCT WARRANTY Products covered: all Products manufactured by AMTROL Inc. (“AMTROL”). This warranty cannot be transferred – it is extended only to the original Purchaser or First User of the Product. By accepting and keeping this Product you agree to all of the warranty terms a...
