Amtrol D-7 - Manual

Amtrol D-7

Amtrol D-7 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
Page: / 2
Loading the manual

READ CAREFULLY THE PRODUCT

INSTALLATION & OPERATION INSTRUCTIONS.

FAILURE TO FOLLOW THE INSTRUCTIONS AND WARNINGS IN THE

MANUAL MAY RESULT IN SERIOUS OR FATAL INJURY AND/OR

PROPERTY DAMAGE, AND WILL VOID THE PRODUCT WARRANTY.

THIS PRODUCT MUST BE INSTALLED BY A QUALIFIED

PROFESSIONAL. FOLLOW ALL APPLICABLE LOCAL AND STATE

CODES AND REGULATIONS, IN THE ABSENCE OF SUCH CODES,

FOLLOW THE CURRENT EDITIONS OF THE NATIONAL PLUMBING

CODE AND NATIONAL ELECTRIC CODE, AS APPLICABLE

This Product, like most Products under pressure,

may over time corrode, weaken and burst or

explode, causing serious or fatal injury, leaking or flooding and/or property

damage. To minimize risk, a licensed professional must install and

periodically inspect and service the Product. A drip pan connected to an

adequate drain must be installed if leaking or flooding could cause

property damage. Do not locate in an area where leaking could cause

property damage to the area adjacent to the appliance or to lower floors

of the structure.

Chlorine & Aggressive Water. The water quality can significantly influ-

ence the life of this product. You should test for corrosive elements,

acidity, total solids and other relevant contaminants, including chlorine

and treat your water appropriately to insure satisfactory performance and

prevent premature failure.

EXPLOSION OR RUPTURE HAZARD.

A relief

valve must be installed to prevent pressure in

excess of local code requirement or maximum working pressure

designated in the Product Manual, whichever is less. Do not expose

product to freezing temperatures or temperatures in excess of 240°F. Do

not adjust the pre-charge or re-charge this Product except during

installation or regular inspection. Replace the Product and do not adjust

the pre-charge if corroded, damaged or with diminished integrity.

Adjustments to pre-charge must be done at ambient temperature only.

Failure to properly size the product or follow these instructions may result

in excessive strain on the system and may lead to product failure, serious

or fatal personal injury, leakage, and/or property damage.

CALIFORNIA PROPOSITION 65 WARNING!

This product contains a

chemical known by the State of California to cause cancer and to cause

birth defects or other reproductive harm. (California Installer/Contractor

- California law requires that this notice be given to consumer/end user

of this product.)

For more information: www.amtrol.com/prop65.html

DIATROL

®

SHOCK SUPPRESSOR

INSTALLATION & OPERATION INSTRUCTIONS

THIS IS THE SAFETY ALERT SYMBOL. IT IS USED TO ALERT YOU TO POTENTIAL PERSONAL INJURY AND OTHER

HAZARDS. OBEY ALL SAFETY MESSAGES THAT FOLLOW THIS SYMBOL TO REDUCE THE RISK OF PERSONAL

INJURY AS WELL AS PROPERTY DAMAGE.

Models D-7 through D-70

NOTE:

Inspect for shipping damage and notify freight carrier or store where purchased immediately if damage is present. To avoid risk of personal

injury and property damage, if the product appears to be malfunctioning or shows signs of corrosion, call a qualified professional immediately. Current

copies of the Product manual can be viewed at www.amtrol.com. Use proper safety equipment when installing.

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Other Amtrol Models

All Amtrol Other