American Standard 2835.128 - Manual

American Standard 2835.128

American Standard 2835.128 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
Page: / 2
Loading the manual

K75

© 2008 AS America Inc.

Revised 2/08

CADET

®

3 FloWise

®

RIGHT HEIGHT™ ELONGATED TOILET

VITREOUS CHINA

CADET

®

3 FloWise

®

RIGHT HEIGHT™ ELONGATED TOILET

2835.128

• Vitreous china

• Meets definition for HET (High Efficiency Toilet)

• High efficiency (4.8 Lpf/1.28 gpf)

• Certified in EPA Water Sense Program

• Qualifies in LEEDS Program

• EverClean

®

surface inhibits the growth of

stain- and odor-causing bacteria, mold,

and mildew on the surface

• Featuring the

Cadet

®

3 Flushing System

• 16-1/2" rim height for accessible application

• Elongated siphon action jetted bowl

• Fully-glazed 2-1/8" trapway

• Generous 9" x 8" water surface area

• Close-coupled tank with flat tank cover for

superior storage

• Oversized 3" flush valve with chemical

resistant flapper

• Chrome trip lever

• Speed Connect

®

tank-to-bowl coupling system

• Sanitary dam on bowl with four point

tank stabilization

• 2 color-matched bolt caps

• 100% factory flush tested

• 5 year warranty

3016.128

Right Height™ Elongated Bowl

4021.128

Tank

Nominal Dimensions:

768 x 438 x 768mm (30-1/4" x 17-1/4" x 30-1/4")
Fixture only, seat and supply by others

Alternative Tank Configurations Available:

4021.513

Tank complete with Aquaguard Liner

4021.613

Tank complete with tank cover

locking device

4021.713

Tank complete with Aquaguard Liner

and tank cover locking device

4021.813

Tank complete with trip lever located

on right side

4021.913

Tank complete with tank cover locking

device and trip lever located on right side

4021.953

Tank complete with Aquaguard Liner,

tank cover locking device and trip lever located

on right side

Compliance Certifications -

Meets or Exceeds the Following Specifications:

• ASME A112.19.2M for Vitreous China Fixtures -

includes Flush Performance, Trap Seal Depth

and all Dimensions

• Los Angeles Department of Water and Power

Supplementary Purchase Specification for

Non-Adjustability

• Certified in EPA WaterSense HET program

To Be Specified:

Color:

White

Bone

Silver

Linen

Black

Seat: #5325.010 Elongated Champion

®

Slow Close

solid plastic seat and cover with easy lift off feature

Seat: #5284.016 Elongated EverClean

®

solid plastic

seat and cover

Seat: #5321.110 EverClean

®

Elongated Seat with

Slow Close Snap-Off Hinges

Supply with stop:

NOTES:

THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF

305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.

SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED

SEPARATELY.

*

DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.

IMPORTANT:

Dimensions of fixtures are nominal and may vary within the range

of tolerances established by ANSI Standard A112.19.2.

These measurements are subject to change or cancellation. No responsibility is

assumed for use of superseded or voided page

MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND
ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND USABLE
BUILDING FACILITIES-CHECK LOCAL CODES.

Certified by

IAPMO R&T

SEE REVERSE FOR ADDITIONAL ROUGHING-IN
DIMENSIONS

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Other American Standard Models

All American Standard Other