American DJ Verti-Pro II - Manual
American DJ Verti-Pro II – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – Operating; mode; Universal DMX Control:; TI PRO IITM if applicable
- Page 4 – ON; SP; DMX CHANNEL
- Page 5 – Conductor; Do Not Use; Sensitivity; Do not attempt to connect an audio
- Page 6 – la; Halogen Lamp W; Fix
- Page 7 – DMX Address Quick Reference Chart; Adjust the dip switches on your fixture to
- Page 8 – ©American DJ Supply; TI PRO IITM; SPECIFICA; VOL; Specifi; ARRANTY; VER
American DJ
®
American DJ
4295 Charter Street
Los
Angeles, CA. 90058
www
.americandj.com
Revised 8/01
User Instructions
Unpacking:
Thank you for purchasing the VERTI PRO II
™ by Ameri-
can DJ
®
. Every VERTI PRO II
™ has been thoroughly tested and has
been shipped in perfect operating condition. Carefully check the ship-
ping carton for damage that may have occurred during shipping. If the
carton appears to be damaged, carefully inspect your fi
xture for any
damage and be sure all ac
c
e
ssories necessary to operate the unit ha
v
e
arrived intact. In the e
v
en
t damage has been found or parts are miss-
ing, please contact our toll free customer support number for further
instructions. P
lease
, d
o
not return this unit to your dealer without fi
rst
contacting customer support.
Introduction:
The VERTI PRO II
™ is an intelligent, DMX c
o
mpa
tible
ve
rs
ion of the st
anda
rd V
e
rt
ig
o
. This fixture can run in DMX mo
de
, as
a stand alone sound active piece, or in a Master/Slave c
o
n
figu
ra
tion
.
The VERTI PRO II
™ comes with several build in programs tha
t will
trig
ge
r when o
p
e
ra
ting in mast
e
r/
s
la
v
e
mo
de
. This unit is best used in
multiples of four. This piece is best used with a fog or haze machine
to
enhanc
e the beam out
p
ut. An optional
VertiPr
o
/C
con
tr
o
lle
r may be
purchased separately.
W
arning!
The 1/4” phone plug on the unit is for the optional V
ertiPro/C.
Do not attempt to connect an audio signal to this jack, this will damage
the PC board and void your manufactures warranty!
Customer Support:
American DJ
®
provides a toll free customer sup-
port line, to provide set up help and to answer any question should you
encounter problems during your set up or initial operation. You may
also visit us on the web at www.americandj.com for any comments or
suggestions. Service Hours are Monday through Friday 9:00 a.m. to
5:00 p.m. Pacifi
c Standard Time.
Voice:
(800)
322-6337
Fax:
(323) 582-2610
E-mail:
Warning!
To prevent or reduce the risk of electrical shock or fi
re, do
not expose this unit to rain or moisture.
Caution!
There are no user serviceable parts inside this unit. Do not
attempt any repairs yourself, doing so will void your manufactures war-
ranty. In the unlikely event your unit may require service please contact
American DJ
®
c
u
st
ome
r sup
p
or
t.
VER
TI PRO II™
Set Up
©
American DJ
®
www
.americandj.com VER
TI PRO II™ Instruction Manual Page 2
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Operating Modes: You can operate the VER TI PRO II ™ in three different modes: • Stand-Alone mode (Usually for single unit operation) - The unit will react to sound, chasing through the several built in programs. You can also use the optional V ertiPro/C remote control to blackout the unit. • Master...
VER TI PRO II™ Operation © American DJ ® - www .americandj.com - VER TI PRO II™ Instruction Manual Page 7 To next DMX unit or terminate. T ypical DMX Linking: © American DJ ® - www .americandj.com - VER TI PRO II™ Instruction Manual Page 8 VER TI PRO II™ Set Up be placed anywhere in a DMX line, at t...
dard two conductor shielded cable (This cable may be purchased at almost all pro sound and lighting stores). Y our cables should be made with a male and female XLR connector on either end of the cable. Also remember that DMX cable must be daisy chained and can not be split. VER TI PRO II™ Set Up Fig...
