American DJ 250EX - Manual

American DJ 250EX – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1

2

3

4

5

6

7

8

9

10

Page: / 10 Go to

Next Page

PDF Text Table of Contents

Table of Contents:

• Page 2 – Safety Precautions; Features; There are no user serviceable parts inside this unit. Do not; Handling Precautions; The DJ Scan 250 EXTM carries a; General Instructions
• Page 3 – in a 120v and 220v version. Because line voltage may vary from venue; Set Up; Be sure to follow figures two and three when making your own; behavior. A terminator is a 90-120 ohm 1/4 watt resistor which is con
• Page 4 – Some manufactures use 5-pin XLR; DMX Address Setting; ADDR; This will let you set unit as a master or slave in a; SLND; Blackout or Stand by mode.; BLND; Pan Inversion; I PAN
• Page 5 – I DSP; VER; System Menu
• Page 6 – Universal DMX Control:; . You can adjust the sensitivity by turning the knob; Operation; UC3 Controller; DJ Scan 250 EXTM UC3 Control
• Page 7 – DMX Traits; Channel; PAN; DJ Scan 250 EXTM Fuse Replacement; Always replace with the exact same type lamp and fuse,
• Page 8 – Cleaning; No light output from the unit; Thumb Screws; Protective Mirror Cover
• Page 10 – Specifications and improvements in the design; Specifications; ©American DJ Supply

Loading the manual

User Instructions

American DJ

®

- www.americandj.com - DJ Scan 250 EX™ Instruction Manual Page 2

Unpacking:

Thank you for purchasing the DJ Scan 250 EX™ by

American DJ

®

. Every DJ Scan 250 EX™ has been thoroughly tested

and has been shipped in perfect operating condition. Carefully check
the shipping carton for damage that may have occurred during ship-

ping. If the carton appears to be damaged, carefully inspect your fix

-

ture for any damage and be sure all equipment necessary to operate
the unit has arrived intact. In the event damage has been found or parts
are missing, please contact our toll free customer support number for
further instructions. Please do not return this unit to your dealer with-

out contacting customer support first.

Introduction:

The DJ Scan 250 EX™ is a five channel, DMX intelligent

fixture. The fixture can used in three different operating modes;

stand

alone, Master/Slave configuration, or DMX controlled. The DJ Scan
250 EX™ can be used as a stand alone

sound active fixture

or used

in multiples linked in a master/slave configuration.

For best results use

fog or special effects smoke to enhance the beams projections.

Customer Support:

American DJ

®

provides a toll free customer

support line, to provide help and to answer any question should you
encounter problems during your set up or initial operation. You may
also visit us on the web at www.americandj.com for any comments or
suggestions. Service Hours are Monday through Friday 9:00 a.m. to

5:00 p.m. Pacific Standard Time.

Voice:

(800) 322-6337

Fax:

(323) 582-2941

E-mail:

[email protected]

To purchase parts online visit http://parts.americandj.com

Warning!

To prevent or reduce the risk of electrical shock or fire, do

not expose this unit to rain or moisture.

Warning!

This may cause severe eye damage. Avoid looking directly

into the light source at all times!

DJ Scan 250 EX™

General Information

American DJ

®

6122 S. Eastern Ave.

Los Angeles Ca. 90040

www.americandj.com

Rev. 3/08

Other American DJ Models

• American DJ Rover
  • Manual
• American DJ XDM-352
  • Manual
• American DJ DJ Roller
  • Manual
• American DJ Verti-Pro
  • Manual
• American DJ WR-80
  • Manual
• American DJ DJ Scan/RG
  • Manual
• American DJ Mighty Scan
  • Manual
• American DJ Light Copilot
  • Manual
• American DJ Sonic Beam II
  • Manual
• American DJ Nitro
  • Manual